Internal tides and waves near the continental shelf edge

Abstract

The subject is reviewed from the viewpoints of theory, internal tide and wave structure and their implications.

A wider theoretical context suggests scope for further investigation of natural or nearly-trapped forms above the inertial frequency.

Although internal tides in many locations are observed to have first-mode vertical structure, higher modes are seen offshore from shallow shelf-break forcing and for particular Froude numbers, and may be expected locally near generation. Bottom intensification is often observed where the sea floor matches the characteristic slope. Solitons form from internal tides of large amplitude or at large changes of depth.

Internal tides and solitons are observed also at many sills and in straits, and to intensify in canyons.

Non-linear effects of the waves, especially solitons, include the conveyance of water, nutrients, ‘‘mixing potential'’ etc. away from their source to other locations, and the generation of mean currents. The waves transfer energy and possibly heat between the ocean and shelf, may be a source of medium frequency waves on the shelf (periods of minutes) and can contribute to interior mixing and overturning, bottom stirring and sediment movement.     

Models of neutron stars in generalized bimetric theory of gravitation

Yerevan State University; Institute of Applied Physics Problems, Armenian Academy of Sciences. Translated fromAstrofizika, Vol. 35, No. 1, pp. 121–129, July–August, 1991.     

On the causes of 18O-depletion and 18O/16O homogenization during regional metamorphism; the East Humboldt Range core complex,Nevada

 Previous stable isotope studies at Lizzies Basin revealed that metasedimentary rocks are ¹⁸O-depleted relative to protolith values, particularly in the lower parts of the section (Lower Zone) where the rocks are also isotopically homogeneous on a scale of hundreds of meters (quartz δ¹⁸O=+9.0 to +9.6 per mil). In contrast, metasedimentary rocks at higher levels at Lizzies Basin (Upper Zone) are less ¹⁸O-depleted and more heterogeneous in δ¹⁸O. In order to understand more fully the isotopic evolution of this terrane, a series of detailed, meter-scale traverses across various metamorphic and igneous lithologies were completed at Lizzies Basin, and at the structurally higher Angel Lake locality. Traverses in the Lizzies Basin Lower Zone and in the lower parts of Angel Lake (Angel Lake Lower Sequence) across various silicate lithologies, including abundant granitoids, reveal similar degrees of homogeneity, although the average δ¹⁸O values are higher at Angel Lake. In contrast, traverses which include substantial thicknesses of marble and calc-silicate gneiss and very little granitoid have more heterogeneous quartz δ¹⁸O values (+11.9 to +13.4 per mil), and also have a higher average δ¹⁸O (+12.9 per mil), than observed elsewhere. The scale of ¹⁸O/¹⁶O homogeneity in quartz observed at Lizzies Basin and Angel Lake (meters to hundreds of meters) requires fluid-mediated isotope exchange, which accompanied Tertiary metamorphism. There is a correlation between the degree of ¹⁸O-depletion in metasedimentary rocks, ¹⁸O/¹⁶O homogenization between lithologies, and the proportion of granitoids (leucogranites in particular) within any part of the section, and a corresponding anticorrelation with the proportion of marble. This points to a causal relationship, whereby the leucogranites (as well as the Tertiary hornblende diorite and biotite monzogranite) acted as both a relatively low-¹⁸O reservoir and a source of fluids to enhance exchange, while the marbles hindered isotope depletion and homogenization by acting as relatively high-¹⁸O reservoirs and impermeable layers. Material balance calculations help delineate the plausible mechanisms of exchange between granitoids and metasediments. Single-pass infiltration of magmatic fluids from the granitoids is not capable of reproducing all of the observations. Fluid-mediated exchange by convective recirculation of magmatic fluids on a scale of meters is the mechanism which explains all of the observations. The generalized model for the isotopic evolution of the East Humboldt Range core complex provides an excellent opportunity to establish the main causes and controlling factors of ¹⁸O-depletion and ¹⁸O/¹⁶O homogenization during regional metamorphism. Received: 27 July 1993 / Accepted: 1 July 1994     

Non-linear channel–shoal dynamics in long tidal embayments

The dynamics of finite-amplitude bed forms in a tidal channel is studied with the use of an idealized morphodynamic model. The latter is based on depth-averaged equations for the tidal flow over a sandy bottom. The model considers phenomena on spatial scales of the order of the tidal excursion length. Transport of sediment mainly takes place as suspended load. The reference state of this model is characterized by a spatially uniform M₂ tidal current over a fixed horizontal bed. The temporal evolution of deviations from this reference state is governed by amplitude equations: these are a set of non-linear equations that describe the temporal evolution of bed forms. These equations are used to obtain new morphodynamic equilibria which may be either static or time-periodic. Several of these bottom profiles show strong similarity with the tidal bars that are observed in natural estuaries. The dependence of the equilibrium solutions on the value of bottom friction and channel width is investigated systematically. For narrow channels (width small compared to the tidal excursion length) stable static equilibria exist if bottom friction is slightly larger than r_cr. For channel widths more comparable to the tidal excursion length, multiple stable steady states may exist for bottom friction parameter values below r_cr. Regardless of channel width, stable time-periodic equilibria seem to emerge as the bottom friction is increased.Responsible Editor: Jens Kappenberg     

Effect of clayey media parameters on the negative response of a coincident loop1

The aim of this work is to consider the phenomenon of negative response and its detectability in a polarizable half-space formed of Clay-water mixture which commonly exists in water aquifers and which can be used as a simple indicator of the presence of Underground water. We make use of an analytical treatment for the transient voltage induced in a coincident loop lying on a half-space as a basis for our computations. A Cole-Cole model is used to represent the Clay with appropriate parameters. As saturated Clay is characterized by high conductivity and moderate chargeability, it is hardly detectable relative to the practical noise level. However, there are optimum Clay parameters that offer a maximum negative response. It is also observed that for a very short time constant τ in the Cole-Cole model, the amplitude of the negative response decreases with the decrease of the time constant due to the fast decay of the polarization current. Finally, it is found that there is an optimum value for the loop radius which gives the largest value of the negative response and this loop radius depends on the model parameters.     

Characterization of Quaternary faults by electric resistivity tomography in the Andean Precordillera of Western Argentina

El río San Juan, situado en la Provincia de San Juan (Argentina) cruza la Precordillera y otras unidades geológicas incluyendo la Depresión de Ullum y la Zona de La Laja, entre las latitudes 31°S y 32°S. El curso del río tiene un cierto caracter antecedente como puede deducirse por sus dos trazas perpendiculares unidas por otra casi paralela a las alineaciones estructurales principales. En la zona de la Precordillera, el valle del río San Juan muestra numerosos abanicos aluviales, situados en las zonas de confluencia entre el río principal y sus tributarios. Las superficies de los abanicos aluviales cuaternarios estan cortadas por una serie de escalones que consideramos como terrazas aluviales generadas por episodios repetitivos de agradación y degradación. El sector estudiado incluye una zona con una importante actividad sísmica reciente(La Laja), otra sin una importante actividad sísmica reciente (Precordillera), y una zona subsidente (Ullum) donde se formó un gran lago natural hace unos 6500 años. El antiguo río San Juan fue capturado por el valle de la Quebrada de Ullum mediante una incisión del orden de 25 m, que implicó una nueva adecuación del gradiente del río mediante los efectos de la erosión remontante. El gradiente del río San Juan muestra algunas irregularidades que, aunque no se presenten relacionadas directamente con las estructuras principales, estan relacionadas con la propia dinámica fluvial que acentúa la diferenciación litológica. La anchura del valle del río principal, la geometria y el gradiente de cada tributario, junto a las litologias del basamento y a las dimensiones de cada area fuente local, son los factores principales que controlan los procesos de la generación de las terrazas aluviales. En la zona de La Laja, donde la terraza mas alta soporta un nivel de travertino, la datación de los depósitos travertínicos proporciona datos como para suponer una tasa de incisión del orden de 0,9–1 mm/año, asociada a la actuación periódica de la falla de La Laja.

Quantitative analysis of calcite and Mg-calcite by X-ray diffraction: effect of grinding on peak height and peak area

Mineralogical analysis of calcite and Mg-calcite by X-ray diffraction requires that the samples be ground to a powder. Such grinding determines the particle size of the powder and the structural damage of the minerals. Both of these in turn affect the peak intensities recorded by the X-ray machine. Most carbonate sediments are inhomogeneous; they contain both calcite and Mg-calcite which are affected differently by grinding. Such differences cause quantitative analytical results to be inconsistent with the true mineralogical abundance. The two acceptable methods of analysis—(1) measurement of peak height from the base and (2) measurement of the area under the peak—were compared to determine if sample preparation affects the quantitative results. In samples with variable and relatively small amounts of calcite and Mg-calcite the measurement of peak height yields more reproducible results than does the measurement of peak areas. Different proportions of particle size of the mineralogical components in a sample powder, affect proportionally more the peak areas than the peak heights. Extensive grinding causes structural damage of the component minerals which affects much more the peak areas than the peak heights. Thus for quantitative analyses of calcite and Mg-calcite in inhomogeneous carbonate samples which require differing grinding times and have greatly variable amounts of calcite and Mg-calcite, the peak height measurement seems to be a better method than peak area measurement.