Comparative Study of the Carbon Emission Situation and Goals between China and India

As the two large developing and populous countries, China and India face the dual challenges of economic development and climate change. Both of them are active in carbon emissions reduction, while India also bears the pressure of being “benchmarked” against China. With taking China and India as the sample of a comparative analysis, and the statistical value of a long sequence as the basic analysis data, based on the detailed analysis and comparison of carbon emissions history, the carbon emissions situation of the two countries from various dimensions including economic development, energy reserves and consumption, etc. were comparatively analyzed. The carbon intensity and energy structure after achieving the objectives were measured and compared by focusing on the carbon emissions reduction targets in China and India. The comparative results show that: China’s total carbon emissions are greater than India’s, but the growth rate of emissions, per capita emissions are significantly lower than India’s, while the carbon intensity decreases significantly faster than that of India. China has taken more efforts to make commitments to carbon reduction than India. With India’s energy structure adjustment, the situation will be gradually better than that in China.     

Detachment folding in a Lower Cambrian–Upper Permian karst reservoir: 3D model of the Yubei 3D area (eastern Markit Slope,Tarim Basin,Northwest China)

A three-dimensional (3D) structural modeling of the Lower Cambrian–Upper Permian Yubei 3D area was performed to understand its structural evolution. This model reproduces the present-day structure of the basin and comprises 11 horizons within Lower Cambrian to Upper Permian rocks. The analysis is based on 3D depth views and faults. The results image salt movements due to tectonics and/or burial. From these observations, this paper deduces that salt structures are correlated to the main faults and tectonic events. From the model analysis, we interpret the timing and geometry of Tarim Basin tectonics. The fault geometry can be resolved based on the strike of the fault, the morphology of hanging wall strata, and the stratigraphic distribution. Emphasis is placed on gypsum rock detachment, considering its movements during the Middle Caledonian event and decoupling effects during tectonic evolution. Moreover, we point to the structural control of the Paleozoic basement and the crustal architecture (Yubei 3D Zone) on the geometry of the Tarim Basin.     

Regional debris flow susceptibility analysis based on principal component analysis and self-organizing map: a case study in Southwest China

A method was developed to analyze the susceptibilities of 541 regional basins affected by debris flows at the Wudongde Dam site in southwest China. Determining susceptibility requires information on source material quantity and occurrence frequency. However, the large number of debris flows can hinder the individual field investigation in a each small basin. Factors that may trigger debris flows can be identified using remotely sensed interpretation information. Susceptibility analysis can then be conducted based on these factors. In this study, SPOT5 satellite imagery, digital elevation models (DEM), a lithology distribution map, and rainfall monitoring data were used to identify 12 debris flow trigger factors: basin relief ratio, slope gradient in the initiation zone, drainage density, downslope curvature of the main channel, vegetation coverage, main channel aspect, topographic wetness index, Melton’s ruggedness number, lithology, annual rainfall, form factor, and cross-slope curvature of the transportation zone. Principal component analysis was used to obtain the eight principal components of these factors that contribute to susceptibility results. Then, a self-organizing map method was adopted to analyze the principal components, which resulted in a debris flow susceptibility classification. Field validation of 26 debris flow basins was used to evaluate the errors of the susceptibility classification, as well as assess the causes of such errors. The study found that principle component analysis and self-organizing map methodologies are good predictors of basin susceptibility to debris flows.     

Underwater Navigation Based on Real-Time Simultaneous Sound Speed Profile Correction

Precise sound speed profile (SSP) information is critical when using sonar for underwater terrain navigation. Nevertheless, acquiring SSP information in real-time is difficult, especially in underwater navigation environment. To account for this problem, this paper presents an underwater navigation method that applies real-time SSP correction to the terrain measurements. The method uses a probe to measure the surface sound speed simultaneously. Meanwhile, redundancy of topographic measurement data is exploited to derive the equivalent SSP information. The acquired equivalent SSP is updated continuously with particle filter algorithm. The terrain measurements can be corrected in real-time with the equivalent SSP to improve the performance of underwater terrain navigation. By removing the impact of inaccurate SSP from the terrain measurements, the proposed method can achieve precise and robust underwater navigation result without using an underway-profiling instrument. Simulated results confirm the good performance of the proposed method.     

A Method for Automatically Selecting Aids to Navigation Based on their Spatial Influence Domains

To address the limitations of manually selecting aids to navigation (AtNs) on charts, a method for automatically selecting AtNs based on their spatial influence domains (SIDs) is proposed. First, the associations between the spatial attributes of an AtN are analyzed. Second, an SID of the AtN is defined, and a model of the SID is constructed based on the associations between the spatial attributes. Third, the importance of the location of the AtN is weighted based on the SID model. Fourth, an algorithm to automatically select AtNs based on the maximum coverage of the SIDS of preselected AtNs is developed. Finally, several AtNs are selected automatically using the algorithm. The experimental results demonstrate that (1) the proposed method can automatically select AtNs and the results comply with the requirements; (2) the automatic selection can eliminate the human-induced errors or the inconsistent results of manual selections from different operators; and (3) the efficiency of the proposed method is higher than that of current manual methods.     

高阶边界元方法求解规则波在三维局部渗透海床上的传播

基于线性势流理论,利用高阶边界元法研究了规则波在三维局部渗透海床上的传播。根据Darcy渗透定律推导出渗透海床的控制方程,利用渗透海床顶部和海底处法向速度和压强连续条件得到渗透海床顶部满足的边界条件。根据绕射理论,利用满足自由水面条件的格林函数建立了求解渗透海床绕射势的边界积分方程,采用高阶边界元方法求解边界积分方程进而得到自由水面的绕射势和波浪在局部渗透海床上传播过程中幅值的变化情况。通过与已发表的波浪对圆柱形暗礁的时域全绕射结果对比,证明了本文建立的频域方法计算波幅的正确性和有效性。利用这一模型研究了三维矩形渗透海床区域上波浪的传播特性,并分析了入射波波长、海床渗透特性系数等参数对波浪传播的影响。     

长江河口北槽河道悬沙絮团特性及其影响因素研究

利用多种先进室内外测量仪器进行河口现场观测和室内电镜扫描获得相关资料,对长江河口北槽河道细颗粒泥沙絮凝的水沙环境、絮团的微观形态结构、絮团的粒径组成及其主要影响因素进行了综合分析和讨论。结果表明,北槽河道具有非常适宜细颗粒泥沙絮凝的潮流、盐度、含沙量和悬沙颗粒粒径等基本环境条件。北槽河道悬沙絮团形态多样,主要包括松散状絮团、蜂窝状絮团和密实状絮团。絮团主要由细粉砂和黏土类细颗粒泥沙组成,表面多粗糙不平,结构或密或疏。絮团粒径变化与潮周期动力过程密切相关,具有周期性变化特征。涨、落憩时絮团粒径较大,涨、落急时絮团粒径较小。絮团粒径涨憩大于落憩,小潮大于大潮。垂向上,絮团粒径由表层至底层逐渐增大。周期性潮流流速对北槽河道悬沙絮团粒径变化起到了控制作用。北槽细颗粒泥沙絮凝作用,是导致疏浚航道发生回淤的主要原因之一。     

基于客观分析的多源卫星叶绿素a浓度产品融合方法研究

本文基于Aqua/MODIS、Terra/MODIS和Envisat/MERIS多源卫星叶绿素a浓度产品,研究了客观分析融合方法,制作了西北太平洋海域(0°~50°N,100°~150°E)叶绿素a浓度融合产品,并从有效数据空间覆盖率和产品精度两个方面对融合方法进行了评价。与单传感器以及欧洲太空局发布的GSM模型业务化融合产品相比,客观分析融合产品空间覆盖率明显提高;与收集的2002-2012年间叶绿素a浓度实测数据比较,GSM模型业务化融合产品的匹配数据点为578个,偏差为-0.20 mg/m3,均方根误差为0.37 mg/m3,客观分析法融合产品的匹配数据点为1432个,偏差为-0.21 mg/m3,均方根误差为0.36 mg/m3。结果表明:本文研究的客观分析融合方法在保证融合产品精度的同时可显著提高产品的空间覆盖率,在海洋水色融合应用前景广阔。     

白缘(鱼央)5S rDNA的扩增分析及其在染色体上的FISH定位

本文分别对雌雄白缘(鱼央)的5S rDNA进行了PCR扩增和序列分析,并采用双色荧光原位杂交(FISH)技术,以白缘(鱼央)的5S rDNA序列和小麦的45S rDNA为探针,对其在白缘(鱼央)雌雄中期染色体上进行了FISH定位研究。结果表明,白缘(鱼央)5S rDNA序列无雌雄差异;5S rDNA的保守区序列为117 bp;5S rDNA和45S rDNA分别被定位于白缘(鱼央)的性染色体和第5号染色体上。同时从GenBank中获得了22种鱼的5S rDNA,运用DNAman软件构建了23种鱼的系统发育树,对白缘(鱼央)的进化地位进行了初步研究。本研究为阐明白缘(鱼央)在鱼类系统进化中的位置、重复序列在脊椎动物性染色体上的分布状况以及与性别决定与分化的关系,提供了资料积累和分析依据。