Approximate analysis methods for asymmetric plan base‐isolated buildings

An approximate method for linear analysis of asymmetric‐plan, multistorey buildings is specialized for a single‐storey, base‐isolated structure. To find the mode shapes of the torsionally coupled system, the Rayleigh–Ritz procedure is applied using the torsionally uncoupled modes as Ritz vectors. This approach reduces to analysis of two single‐storey systems, each with vibration properties and eccentricities (labelled ‘effective eccentricities’) similar to corresponding properties of the isolation system or the fixed‐base structure. With certain assumptions, the vibration properties of the coupled system can be expressed explicitly in terms of these single‐storey system properties. Three different methods are developed: the first is a direct application of the Rayleigh–Ritz procedure; the second and third use simplifications for the effective eccentricities, assuming a relatively stiff superstructure. The accuracy of these proposed methods and the rigid structure method in determining responses are assessed for a range of system parameters including eccentricity and structure flexibility. For a subset of systems with equal isolation and structural eccentricities, two of the methods are exact and the third is sufficiently accurate; all three are preferred to the rigid structure method. For systems with zero isolation eccentricity, however, all approximate methods considered are inconsistent and should be applied with caution, only to systems with small structural eccentricities or stiff structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Modelling evaporation using an artificial neural network algorithm

This paper investigates the prediction of Class A pan evaporation using the artificial neural network (ANN) technique. The ANN back propagation algorithm has been evaluated for its applicability for predicting evaporation from minimum climatic data. Four combinations of input data were considered and the resulting values of evaporation were analysed and compared with those of existing models. The results from this study suggest that the neural computing technique could be employed successfully in modelling the evaporation process from the available climatic data set. However, an analysis of the residuals from the ANN models developed revealed that the models showed significant error in predictions during the validation, implying loss of generalization properties of ANN models unless trained carefully. The study indicated that evaporation values could be reasonably estimated using temperature data only through the ANN technique. This would be of much use in instances where data availability is limited. Copyright © 2002 John Wiley & Sons, Ltd.     

Geochemistry and Rb–Sr geochronology of a ductile shear zone in the Orlica-Śnieżnik dome (West Sudetes, Poland)

Amphibolite-facies orthogneisses of the Orlica-vnie™nik dome in the West Sudetes (Poland) show a local continuous transition from weakly deformed augen gneisses to finely laminated mylonites. Field evidence indicates that ductile shearing developed pre- or syntectonically to a migmatization event. Bulk-rock compositions of variably deformed samples yield no indications for deformation- and/or fluid-enhanced element mobility and redistribution. ⁸⁷Rb-⁸⁶Sr geochronology (biotite, phengite, whole rock) places time constraints on the deformation process and the post-orogenic cooling history. Phengite- and biotite-whole-rock pairs yield Rb-Sr ages of 340 to 334 Ma and 335 to 294 Ma, respectively, independent of the degree of deformation. The weighted mean of phengite-whole-rock pairs indicates an age of 337.4DŽ.3 Ma. Combining most of the biotite-whole-rock data yields a weighted mean age of 328.6dž.4 Ma. Because of their different closure temperatures for the Rb-Sr system, these differences are interpreted to date cooling after a thermal event. Direct dating of the deformation is not possible, but the cooling history record defines a minimum age for the development of ductile shearing and the last migmatization event. These time constraints provide evidence for the initiation of crustal collapse during or immediately following peak metamorphic conditions. The results of this study further document the importance of Variscan metamorphism in the Orlica-vnie™nik dome.     

Influence of gold mine on groundwater quality (Efemçukuru, Izmir, Turkey)

. Currently, exploration of gold ores is under discussion in Turkey, without considering its adverse affect on the environment. Studying the adverse affect on environment is extremely important because significant civic activities are already taking place on the geological units that contain gold ore bodies in Turkey. Such an area is located at the southeast of Izmir City (Turkey), and approximately 2-km-long gold-bearing ore veins occur close to the Efemçukuru Village. The objective of this study was to describe the characteristics and seasonal variation of the groundwater chemistry and pollution of the aquifer in the ore deposit site, and to determine the impact of ore deposits on groundwater quality. The gold-bearing formation is highly weathered and fractured. The fractures in the geological units control the permeability and the depth of groundwater in the area. The concentrations of Al, Ag, Cu, Cd, Cr, Fe, Pb, Mn, Zn, Ni, and Sb were determined for four well samples and two stream waters for wet and dry seasons. The results showed that the concentrations of most of these elements were below the USA EPA (Environmental Protection Agency) limits; however, Pb and Cd concentrations are slightly above the limits. The results indicate that minerals in gold bodies do not dissolve although the weathering of formations is high. The low concentration of elements in groundwater and streams may be attributed to the high velocity of ground and surface water.     

A double-head photon-counting photometer for fast timing observations

The structure of the electronics of the two-head, high-speed photometer operating on the 152-cm G.D. Cassini telescope of Bologna University has been fully redesigned for high-time-resolution observations of fast variable sources, in particular, of the optical counterparts of X-ray binary systems. The fast photometer now permits sampling times from 0.1 ms to 100 s. The handling of the system clock and I/O configuration have been modified to provide rigorous synchronization of the sampling time with an external high-stability clock and the continuous acquisition of an uninterrupted data stream. The continuous data-acquisition process, which is driven by an external clock, is limited only by the capacity of the hard disk and is supported by a double-buffer SRAM memory designed to overcome any discontinuity in the asynchronous communication with the computer. Real-time monitoring of the data enables continuous evaluation of the weather conditions, and the directly displayed light curve can be used to determine the optimal management of the observations.     

Chlorophyll modulation of mixed layer thermodynamics in a mixed-layer isopycnal General Circulation Model — An example from Arabian Sea and equatorial Pacific

Western tropical Indian Ocean, Arabian Sea, and the equatorial Pacific are known as regions of intense bio-chemical-physical interactions: the Arabian Sea has the largest phytoplankton bloom with seasonal signal, while the equatorial Pacific bloom is perennial with quasi-permanent upwelling. Here, we studied three dimensional ocean thermodynamics comparing recent ocean observation with ocean general circulation model (OPYC) experiment combined with remotely sensed chlorophyll pigment concentrations from the Coastal Zone Color Scanner (CZCS). Using solar radiation parameterization representing observations that a higher abundance of chlorophyll increases absorption of solar irradiance and heating rate in the upper ocean, we showed that the mixed layer thickness decreases more than they would be under clear water conditions. These changes in the model mixed layer were consistent with Joint Global Ocean Flux Study (JGOFS) observations during the 1994-1995 Arabian Sea experiment and epi-fluorescence microscopy (EFM) on samples collected during Equatorial Pacific Ocean Climate Study (EPOCS) in November, 1988. In the Arabian Sea, as the chlorophyll concentrations peak in October (3 mg/m³) after the summer plankton bloom induced by coastal upwelling, the chlorophyll induced biological heating enhanced the sea surface temperature (SST) by as much as 0.6‡C and sub-layer temperature decreases and sub-layer thickness increases. In the equatorial Pacific, modest concentrations of chlorophyll less than 0.3 mg/m³ is enough to introduce a meridional differential heating, which results in reducing the equatorial mixed layer thickness to more than 20 m. The anomalous meridional tilting of the mixed layer bottom enhances off equatorial westward geostrophic currents. Consequently, the equatorial undercurrent transports more water from west to east. We proposed that these numerical model experiments with use of satellite andin situ ocean observations are consistent under three dimensional ocean circulation theory combined with solar radiation transfer process.     

The Mw = 6.0, 7 September 1999 Athens Earthquake

On 7 September 1999 at 11:56 GMT a destructive earthquake (M_w = 6.0) occurred close to Athens (Greece). The rupture process is examined using data from the Cornet local permanent network, as well as teleseismic recordings. Data recorded by a temporary seismological network were analyzed to study the aftershock sequence. The mainshock was relocated at 38.105°N, 23.565°E, about 20 km northwest of Athens. Four foreshocks were also relocated close to the mainshock. The modeling of teleseismic P and SH waves provides a well-constrained focal mechanism of the mainshock (strike = 105°, dip = 55° and rake = -80°) at a depth of 8 km and a seismic moment M₀ = 1.010²⁵ dyn·cm. The obtained fault plane solution represents normal faulting indicating an almost north-south extension. More than 3500 aftershocks were located, 1813 of which present RMS < 0.1 s and ERH, ERZ < 1.0 km. Two main clusters were distinguished, while the depth distribution is concentrated between 2 and 11 km. Over 1000 fault plane solutions of aftershocks were constrained, the majority of which also correspond to N–S extension. No surface breaks were observed but the fault plane solution of the mainshock is in agreement with the tectonics of the area and with the focal mechanisms obtained by aftershocks. The hypocenter of the mainshock is located on the deep western edge of the fault plane. The relocated epicenter coincides with the fringe that represents the highest deformation observed on the differential interferometric image. The calculated source duration is 5 sec, while the estimated dimensions of the fault are 15 km length and 10 km width. The source process is characterized by unilateral eastward rupture propagation, towards the city of Athens. An evident stop phase observed in the recordings of the Cornet local stations is interpreted as a barrier caused by the Aegaleo Mountain.     

Ludlow (Silurian) stromatoporoid biostromes from Gotland, Sweden: facies, depositional models and modern analogues

Stacked stromatoporoid‐dominated biostromes of the Ludlow‐age Hemse Group (Silurian) in eastern Gotland, Sweden, are 0·5–5 m thick and a few tens of metres to >1 km in lateral extent. They form one of the world's richest Palaeozoic stromatoporoid deposits. This study compiles published and new data to provide an overall facies model for these biostromes, which is assessed in relation to possible modern analogues. Some biostromes have predominantly in‐place fossils and are regarded as reefs, but lack rigid frameworks because of abundant low‐profile non‐framebuilding stromatoporoids; other biostromes consist of stromatoporoid‐rich rudstones interpreted here as storm deposits. Variation between these two `end‐members' occurs both between interlayered biostromes and also vertically and laterally within individual biostromes. Such variation produces problems of applying established reef classification terms and demonstrates the need for the development of terminology that recognizes taphonomic destruction of reef fabrics. An approach to such terminology is found in all four categories of a recent biostrome classification scheme that are easily recognized in the Hemse biostrome facies: autobiostromes (>60% in place); autoparabiostromes (a mixture of in‐place and overturned reef‐building organisms, 20–60% in place); parabiostromes (builders are overturned and damaged, <20% in place); and allobiostromes (transported and detrital reef material, nothing in place). These categories provide a broad taphofacies scheme for the Hemse biostromes, which are mostly autoparabiostrome to allobiostrome. The biostromes developed on crinoidal grainstone sheets and expanded laterally across relatively flat substrates in a marine setting of low siliciclastic input. Planar erosion surfaces commonly terminate biostrome tops. Three broadly similar modern analogues are identified, each of which has elements in common with the Hemse biostromes, but none of which is an exact equivalent: (a) laterally expanded and coalesced back‐barrier patch reefs behind the Belize barrier, an area influenced by limited accommodation space; (b) a hurricane‐influenced shelf, interpreted for Grand Cayman, where reef cores consist of rubble and lack substantial framework; the wide distribution of rounded pebbles and cobbles of stromatoporoids in the Hemse biostromes most probably resulted from hurricanes; (c) coral carpets in 5–15 m water depth of the northern Red Sea, where lateral expansion of low‐diversity frames dominated by Porites coral has produced low‐profile biostromes up to 8 m thick and several km long. Such carpets accumulated large amounts of carbonate, with little export, as in the Hemse biostromes, although the latter did not build frameworks because of the nature of growth of the stromatoporoids. The notable lack of algae in the Hemse biostrome facies is also a feature of Red Sea coral carpets; nevertheless, coral carpets are ecologically different. Hemse biostromes lack evidence of a barrier reef system, although this may not be exposed; the facies assemblage is consistent with either a storm/hurricane‐influenced mid‐ to upper ramp or back‐barrier system.     

An automated strategy for calculation of phase diagram sections and retrieval of rock properties as a function of physical conditions

We formulate an algorithm for the calculation of stable phase relations of a system with constrained bulk composition as a function of its environmental variables. The basis of this algorithm is the approximate representation of the free energy composition surfaces of solution phases by inscribed polyhedra. This representation leads to discretization of high variance phase fields into a continuous mesh of smaller polygonal fields within which the composition and physical properties of the phases are uniquely determined. The resulting phase diagram sections are useful for understanding the phase relations of complex metamorphic systems and for applications in which it is necessary to establish the variations in rock properties such as density, seismic velocities and volatile‐content through a metamorphic cycle. The algorithm has been implemented within a computer program that is general with respect to both the choice of variables and the number of components and phases possible in a system, and is independent of the structure of the equations of state used to describe the phases of the system.