Oil-weathering behavior in Arctic environments

Oil-weathering processes in ice-free subarctic and Arctic waters include spreading, evaporation, dissolution, dispersion of whole-oil droplets into the water column, photochemical oxidation, water-in-oil emulsification, microbial degradation, adsorption onto suspended particulate material, ingestion by organisms, sinking, and sedimentation. While many of these processes also are important factors in ice-covered waters, the various forms of sea ice (depending on the active state of ice growth, extent of coverage and/or decay) impart drastic, if not controlling, changes to the rates and relative importance of different oil-weathering mechanisms. Flow-through seawater wave-tank experiments in a cold room at −35°C and studies in the Chukchi Sea in late winter provide data on oil fate and effects for a variety of potential oil spill scenarios in the Arctic. Time-series chemical weathering data are presented for Prudhoe Bay crude oil released under and encapsulated in growing first-year columnar ice through spring breakup.     

Experimental Melting of Cordierite Gneiss and the Petrogenesis of Syntranscurrent Peraluminous Granites in Southern Brazil

To understand the petrogenesis of peraluminous granites syntectonicto the Dorsal de Canguçu Transcurrent Shear Zone in theSul-rio-grandense Shield, Brazil, melting experiments were performedon one of the potential protoliths, a cordierite-bearing semi-peliticmetasedimentary gneiss (PE-1). Experiments were conducted atpressures of 5, 10 and 15 kbar, at temperatures of 700–900°C,and under fluid-absent and 5% H₂O-present conditions. The experimentsshow that fluid-absent melting begins at near-solidus conditions,around 700°C, promoted by participation of retrogressivephengitic muscovite in the reaction Mus + Kf ± Qz = melt± Fe–Ti oxide ± Als, producing a very smallamount of melt (<9%) with widely ranging composition. Allhypersolidus experiments (>800°C) produced S-type graniticmelts promoted by participation of biotite or cordierite inthe reactions Bio + Pl + Crd + Qz = Px + Fe–Ti oxide +melt at 5 kbar, and Bio + Pl + Crd ± Qz = Grt + Als ±Kf + melt at 10 and 15 kbar, both producing a high amount ofmelt (10–63% by volume). The melt compositions obtainedat 900°C and 15 kbar under fluid-absent conditions, promotedby biotite or cordierite breakdown, are similar to the syntectonicgranites. However, it is unlikely that the granites were formedat this pressure (corresponding to a depth of melting of     

Multi-stakeholder collaboration yields valuable data for cetacean conservation in Gamba,Gabon

Private industry, the Government of Gabon and two international NGOs collaborated to conduct marine surveys off the coast of Gabon, Central Africa. Surveys addressed multiple objectives of surveillance and monitoring, the documentation of the distribution of and threats to the marine megafauna, and capacity-building among government agents and local early-career scientists. During 22 days of survey effort over a two-year period, observers documented humpback whales Megaptera novaeangliae, bottlenose dolphins Tursiops truncatus, Atlantic humpback dolphins Sousa teuszii and common dolphins Delphinus delphis. Humpback whale presence was limited to the months of July to November. Bottlenose dolphins were present year-round and photo-identification of individuals indicated a closed, resident population, with an abundance estimate of 118 (CV = 21.6%, 95% CI 78–180). Small open-decked fishing vessels with gillnets were observed concentrated around river mouths within 2 km of shore, while commercial trawlers were at least 10 km offshore; all were confirmed to be registered and legal. Observations of marine turtles, flocks of marine birds, and floating logs and other debris were sparse. This multi-stakeholder collaboration to conduct a marine survey can serve as an effective model by which funding and logistic support from private industry paired with technical expertise from NGOs and academic institutions can benefit marine and coastal conservation.     

Gravity variations along the Southeast Bohol Ophiolite Complex (SEBOC), Central Philippines: Implications on Ophiolite Emplacement

Abstract The basement complex of Bohol Island consists of the Southeast Bohol Ophiolite Complex (SEBOC), Cansiwang Melange and Alicia Schist. The SEBOC is a complete, but dismembered ophiolite with outcrops generally trending northeast– southwest and dipping north-west. The harzburgite units of the SEBOC are almost always observed to be thrusted onto the Cansiwang Melange, which in turn is thrusted onto the Alicia Schist. Bouguer gravity values on Bohol range from about +60 mGal in the west to +120 mGal in the east, in the region to the north-east of the SEBOC outcrops. Based on the present distribution of the SEBOC units and their thrust fault relationship with the Cansiwang Melange and Alicia Schist, it is proposed that the SEBOC was emplaced by onramping towards the south-eastward direction. However, the orientation of the Bouguer highs suggests that the thrusting direction of the ophiolite units is towards the south-west and not towards the south-east.     

Geochemistry of meteoric calcite cements in some Pleistocene limestones

In this study, the stable isotope and trace element geochemistries of meteoric cements in Pleistocene limestones from Enewetak Atoll (western Pacific Ocean), Cat Island (Bahamas), and Yucatan were characterized to help interpret similar cements in ancient rocks. Meteoric calcite cements have a narrow range of δ¹⁸O values and a broad range of δ¹³C values in each geographical province. These Pleistocene cements were precipitated from water with stable oxygen isotopic compositions similar to modern rainwater in each location. Enewetak calcite cements have a mean δ¹⁸O composition of ?6.5%₀ (PDB) and δ¹³C values ranging from ?9.6 to +0.4%0 (PDB). Sparry calcite cements from Cat Island have a mean δ¹⁸O composition of ?4.1%₀ and δ¹³C values ranging from ?6.3 to + 1.1%₀. Sparry cements from Yucatan have a mean δ¹⁸O composition of ?5.7%₀ and δ¹³C values of ?8.0 to ?2.7%₀. The mean δ¹⁸O values of these Pleistocene meteoric calcite cements vary by 2.4%₀ due to climatic variations not related directly to latitude. The δ¹³C compositions of meteoric cements are distinctly lower than those of the depositional sediments. Variations in δ¹³C are not simply a function of distance below an exposure surface. Meteoric phreatic cements often have δ¹³C compositions of less than —4.0%₀, which suggests that soil-derived CO₂ and organic material were washed into the water table penecontemporaneous with precipitation of phreatic cements. Concentrations of strontium and magnesium are quite variable within and between the three geographical provinces. Mean strontium concentrations for sparry calcite cements are, for Enewetak Atoll, 620 ppm (σ= 510 ppm); for Cat Island, 1200 ppm (σ= 980 ppm); and for Yucatan, 700 ppm (σ= 390 ppm). Equant cements, intraskeletal cements, and Bahamian cements have higher mean strontium concentrations than other cements. Equant and intraskeletal cements probably precipitated in more closed or stagnant aqueous environments. Bahamian depositional sediments had higher strontium concentrations which probably caused high strontium concentrations in their cements. Magnesium concentrations in Pleistocene meteoric cements are similar in samples from Enewetak Atoll (mean =1.00 mol% MgCO₃; σ= 0.60 mol% MgCO₃) and Cat Island (mean = 0.84 mol% MgCO₃; σ= 0.52mol% MgCO₃) but Yucatan samples have higher magnesium concentrations (mean = 2.20 mol% MgCO₃: σ= 0.84mol% MgCO₃). Higher magnesium concentrations in some Yucatan cements probably reflect precipitation in environments where sea water mixed with fresh water.     

Effects of winter atmospheric circulation on temporal and spatial variability in annual streamflow in the western United States

Abstract

Winter mean 700-hectoPascal (hPa) height anomalies, representing the average atmospheric circulation during the snow season, are compared with annual streamflow measured at 140 streamgauges in the western United States. Correlation and anomaly pattern analyses are used to identify relationships between winter mean atmospheric circulation and temporal and spatial variability in annual streamflow. Results indicate that variability in winter mean 700-Hpa height anomalies accounts for a statistically significant portion of the temporal variability in annual streamflow in the western United States. In general, above-average annual streamflow is associated with negative winter mean 700-Hpa height anomalies over the eastern North Pacific Ocean and/or the western United States. The anomalies produce an anomalous flow of moist air from the eastern North Pacific Ocean into the western United States that increases winter precipitation and snowpack accumulations, and subsequently streamflow. Winter mean 700-hPa height anomalies also account for statistically significant differences in spatial distributions of annual streamflow. As part of this study, winter mean atmospheric circulation patterns for the 40 years analysed were classified into five winter mean 700-hPa height anomaly patterns. These patterns are related to statistically significant and physically meaningful differences in spatial distributions of annual streamflow.     

Lake Hoare, Antarctica: sedimentation through a thick perennial ice cover

Lake Hoare in the Dry Valleys of Antarctica is covered with a perennial ice cover more than 3 m thick, yet there is a complex record of sedimentation and of growth of microbial mats on the lake bottom. Rough topography on the ice covering the lake surface traps sand that is transported by the wind. In late summer, vertical conduits form by melting and fracturing, making the ice permeable to both liquid water and gases. Cross-sections of the ice cover show that sand is able to penetrate into and apparently through it by descending through these conduits. This is the primary sedimentation mechanism in the lake. Sediment traps retrieved from the lake bottom indicate that rates of deposition can vary by large amounts over lateral scales as small as 1 m. This conclusion is supported by cores taken in a 3 × 3 grid with a spacing of 1.5 m. Despite the close spacing of the cores, the poor stratigraphic correlation that is observed indicates substantial lateral variability in sedimentation rate. Apparently, sand descends into the lake from discrete, highly localized sources in the ice that may in some cases deposit a large amount of sand into the lake in a very short time. In some locations on the lake bottom, distinctive sand mounds have been formed by this process. They are primary sedimentary structures and appear unique to the perennially ice-covered lacustrine environment. In some locations they are tens of centimetres high and gently rounded with stable slopes; in others they reach ～ 1 m in height and have a conical shape with slopes at angle of repose. A simple formation model suggests that these differences can be explained by local variations in water depth and sedimentation rate. Rapid colonization and stabilization of fresh sand surfaces by microbial mats composed of cyanobacteria, eukaryotic algae, and heterotrophic bacteria produces a complex intercalation of organic and sandy layers that are a distinctive form of modern stromatolites.     

Dip and anisotropy effects on flow using a vertically skewed model grid

Darcy flow equations relating vertical and bedding-parallel flow to vertical and bedding-parallel gradient components are derived for a skewed Cartesian grid in a vertical plane, correcting for structural dip given the principal hydraulic conductivities in bedding-parallel and bedding-orthogonal directions. Incorrect-minus-correct flow error results are presented for ranges of structural dip (0 < or = theta < or = 90) and gradient directions (0 < or = phi < or = 360). The equations can be coded into ground water models (e.g., MODFLOW) that can use a skewed Cartesian coordinate system to simulate flow in structural terrain with deformed bedding planes. Models modified with these equations will require input arrays of strike and dip, and a solver that can handle off-diagonal hydraulic conductivity terms.