Gonadal histology and serum vitellogenin levels of bigeye tuna Thunnus obesus from the Northern Pacific Ocean--absence of endocrine disruption bio-indicators

Endocrine disrupting chemicals such as organochlorines have been detected in a large number of marine fish. Histological observation of the gonads, measurement of serum vitellogenin (VTG) level and of liver polychlorinated biphenyl (PCB) content were performed to evaluate the reproductive health and the contamination with endocrine disruptors in bigeye tuna Thunnus obesus, collected in the northern Pacific Ocean in 1999 and 2000. Abnormalities commonly found in species affected by endocrine disruptors such as the presence of oocytes in the testis or elevated serum VTG levels were not found in any of males examined. Both males and females had only small amounts of liver PCB content. The results suggest that currently there is little if any risk of organochlorine contamination or endocrine disruption of gonadal function in bigeye tuna from the northern Pacific Ocean. However, further studies are necessary to evaluate the health status of the open sea fishery resources.     

Intermittent generation of mafic enclaves in the 1991–1995 dacite of Unzen Volcano recorded in mineral chemistry

Mafic enclaves in the 1991–1995 dacite of Unzen volcano show chemical and textural variability, such as bulk SiO₂ contents ranging from 52 to 62 wt% and fine- to coarse-grained microlite textures. In this paper, we investigated the mineral chemistry of plagioclase and hornblende microlites and distinguished three enclave types. Type-I mafic enclaves contain high-Mg plagioclase and low-Cl hornblende as microlites, whereas type-III enclaves include low-Mg plagioclase and high-Cl hornblende. Type-II enclaves have an intermediate mineral chemistry. Type-I mafic enclaves tend to show a finer-grained matrix, have slightly higher bulk rock SiO₂ contents (56–60 wt%) when compared with the type-III mafic enclaves (SiO₂?=?53–59 wt%), but the overall bulk enclave compositions are within the trend of the basalt–dacite eruptive products of Quaternary monogenetic volcanoes around Unzen volcano. The origin of the variation of mineral chemistry in mafic enclaves is interpreted to reflect different degree of diffusion-controlled re-equilibration of minerals in a low-temperature mushy dacitic magma reservoir. Mafic enclaves with a long residence time in the dacitic magma reservoir, whose constituent minerals were annealed at low-temperature to be in equililbrium with the rhyolitic melt, represent type-III enclaves. In contrast, type-I mafic enclaves result from recent mafic injections with a mineral assemblage that still retains the high-temperature mineral chemistry. Taking temperature, Ca/(Ca?+?Na) ratio of plagioclase, and water activity of the hydrous Unzen magma into account, the Mg contents of plagioclase indicate that plagioclase microlites in type-III enclaves initially crystallized at high temperature and were subsequently re-equilibrated at low-temperature conditions. Compositional profiles of Mg in plagioclase suggest that older mafic enclaves (Type-III) had a residence time of ~100 years at 800 °C in a stagnant magma reservoir before their incorporation into the mixed dacite of the 1991–1995 Unzen eruption. Presence of different types of mafic enclaves suggests that the 1991–1995 dacite of Unzen volcano tapped mushy magma reservoir intermittently replenished by high-temperature mafic magmas.     

Comparative analysis of contributing parameters for rainfall-triggered landslides in the Lesser Himalaya of Nepal

In the Himalaya, people live in widely spread settlements and suffer more from landslides than from any other type of natural disaster. The intense summer monsoons are the main factor in triggering landslides. However, the relations between landslides and slope hydrology have not been a focal topic in Himalayan landslide research. This paper deals with the contributing parameters for the rainfall-triggered landslides which occurred during an extreme monsoon rainfall event on 23 July 2002, in the south-western hills of Kathmandu valley, in the Lesser Himalaya, Nepal. Parameters such as bedrock geology, geomorphology, geotechnical properties of soil, and clay mineralogy are described in this paper. Landslide modeling was performed in SEEP/W and SLOPE/W to understand the relationship of pore water pressure variations in soil layers and to determine the spatial variation of landslide occurrence. Soil characteristics, low angle of internal friction of fines in soil, medium range of soil permeability, presence of clay minerals in soil, bedrock hydrogeology, and human intervention were found to be the main contributing parameters for slope failures in the region.     

Diel Patterns in Chlorophyll <Emphasis Type="Italic">a</Emphasis> Specific Absorption Coefficient and Absorption Efficiency Factor of Picoplankton

Diel patterns in the chlorophyll a specific absorption coefficient of surface picoplankton, a*_pico (γ) (m²·[mg chlorophyll a]⁻¹), were studied at 7 stations under daily cycle of in situ light condition in the western subarctic Pacific and Japan Sea. All the data were normalized by dividing the anomaly with daily averaged a*_pico (γ). Opposite diel patterns were observed for the normalized a*_pico (443) and a*_pico (675) with maximum toward dawn or dusk and minimum toward midday at 4 stations under low-irradiance (LI) conditions and vice versa at 3 stations under high-irradiance (HI) conditions. The absorption efficiency factors at red absorption peak, Q _a (675), were determined by reconstruction with intracellular chlorophyll a concentration and cell diameter. The normalized Q _a (675) also showed diel pattern with maximum toward midday and minimum toward dawn or dusk under LI. The diel pattern in a*_pico (675) and Q _a (675) were primarily caused by changes in intracellular chlorophyll a concentration due to photoadaptation under LI. The diel pattern in a*_pico (443) was influenced by pigmentation, as recognized by blue to red ratio [a*_pico (443)/a*_pico (675)] under HI. This study proposed that the opposite diel pattern in a*_pico (γ) might occur for a wide range of algal species. The results presented here have important consequences for the interpretation of diel variations in optical properties observed in the open ocean.     

Spatial distribution of deuterium in atmospheric water vapor: Diagnosing sources and the mixing of atmospheric moisture

We measured the stable isotopic composition of hydrogen (δD) within atmospheric water vapor collected simultaneously at six sites in the vicinity of a lake (Lake Kasumigaura, Eastern Japan) to determine its spatial distribution characteristics and thereby diagnose sources and mixing of atmospheric moisture. The measured spatial distribution of δD showed no relation to distance from the lake, although it showed a correlation with the distribution of the water-vapor mixing ratio Q. For two of the three sampling days, we found a simple two-component (i.e., water vapor transpiring from local land surfaces and pre-existing vapor in the background atmosphere) mixing line in a Keeling plot (i.e., δ − 1/Q diagram). On a third day, however, contributions from lake evaporation were detected in addition to the above components. On this day, lake-derived vapor accounted for approximately 10-20% of atmospheric water vapor at the sites located leeward of the lake. The observed differences in mixing patterns among sampling days can be explained by a simple atmospheric moisture budget. Thus, it is likely that simultaneous isotopic measurements of atmospheric water vapor at multiple locations with aid of Keeling plot are capable of giving us useful information in diagnosing the sources and mixing pattern of the vapor.     

Scaling model experiments on propagation of electromagnetic waves using salt solution to simulate the Earth's crust: Loma Prieta and Kobe earthquakes

Propagation of electromagnetic (EM) waves from an earthquake focus in the conductive Earth has been investigated using 1/1,000,000 scaling models taking earth-ionosphere and ocean-Moho plane parallel-plate waveguides into account. Microwaves at a frequency, ω_m, a million times higher than that of seismic EM signal (SEMS), ω, were generated at the model focus. They are propagated in a salt solution modeling the earth's crust and reflected by ocean, fault planes, ionosphere and Moho plane all made by aluminum. Distribution of EM power was mapped by scanning a detector antenna over the model Earth's surface. The skin depth, δ, calculated by the exact skin depth equation, 1/δ=ω(μ/2)^1/2 [(1+(1/ωρ)²)^1/2 −1]^1/2 where dielectric constant, and permeability, μ are the same but resistivity, ρ, 10⁻⁶ times smaller than that of Earth, gave 10⁻⁶ times small skin depth validating the model scaling index. Images for evanescent and wave-ripple standing waves disturbed by normal, strike-slip and dip-slip conductive fault planes have been obtained using an aluminum plate. The co-circular contour map above the epicenter due to evanescence was pushed to the north east direction from the epicenter by the presence of ocean for the Loma Prieta earthquake, while to north direction for the Kobe earthquake. The intensity of EM ULF emissions for the Loma Prieta earthquake is discussed quantitatively.     

Implications of Analcime Hydrothermally Formed from Na-alumino-borosilicate Glasses Containing Cs and Sr for the Stability of High-level Radioactive Waste Form

Abstract. In order to know the behaviors of radioactive elements such as cesium and strontium during a hydrothermal alteration of borosilicate glass of radioactive waste, some alumino-borosilicate glasses belonging to the systems Na₂O-Al₂O₃-B₂O₃-SiO₂-SrO, Na₂O-Al₂O₃-B₂O₃-SiO₂-Cs₂O and Na₂O-Al₂-O₃-B₂O₃-SiO₂-SrO-Cs₂O have been treated hydrothermally at 200C under a vapor pressure of 1.54 MPa. The result shows that all glasses are changed into crystalline phases with running time up to 60 days, and that analcime-type zeolite is formed as a major product. The formed zeolite is shown to contain cesium and/or strontium. Considering the fact that natural zeolite occurs in wide physicochemical conditions including hydrothermal one, the analcime-type zeolite is expected to fix stably the radioactive elements in the disposal site. Since aluminum is necessary for the formation of the analcime-type zeolite, the waste glass should have aluminum as one of major components.     

Electric conductivity of Fe2SiO4–Fe3O4 spinel solid solutions

 The spinel solid solution was found to exist in the whole range between Fe₃O₄ and γ-Fe₂SiO₄ at over 10 GPa. The resistivity of Fe_{3− x} Si _x O₄ (0.0<x<0.288) was measured in the temperature range of 80∼300 K by the AC impedance method. Electron hopping between Fe³⁺ and Fe²⁺ in the octahedral site of iron-rich phases gives a large electric conductivity at room temperature. The activation energy of the electron hopping becomes larger with increasing γ-Fe₂SiO₄ component. A nonlinear change in electric conductivity is not simply caused by the statistical probability of Fe³⁺–Fe²⁺ electron hopping with increasing the total Si content. This is probably because a large number of Si⁴⁺ ions occupies the octahedral site and the adjacent Fe²⁺ keeping the local electric neutrality around Si⁴⁺ makes a cluster, which generates a local deformation by Si substitution. The temperature dependence of the conductivity of solid solutions indicates the Verwey transition temperature, which decreases from 124(±2) K at x=0 (Fe₃O₄) to 102(±5) K at x=0.288, and the electric conductivity gap at the transition temperature decreases with Si⁴⁺ substitution. Received: 15 March 2000 / Accepted: 4 September 2000     

Geochemical study of arsenic and other trace elements in groundwater and sediments of the Old Brahmaputra River Plain,Bangladesh

The geochemical study of groundwaters and core sediments from the Old Brahmaputra plain of Bangladesh was conducted to investigate the distribution of arsenic and related trace elements. Groundwaters from tube wells are characterized by pH of 6.4–7.4, dissolved oxygen (DO) of 0.8–1.8 mg/l, Ca contents of 5–50 mg/l, and Fe contents of 0.2–12.9 mg/l. Arsenic concentrations ranged from 8 to 251 μg/l, with an average value of 63 μg/l. A strong positive correlation exists between As and Fe (r ² = 0.802; p = 0.001) concentrations in groundwater. The stratigraphic sequences in the cores consist of yellowish silty clays at top, passing downward into grayish to yellowish clays and sands. The uppermost 3 m and lower parts (from 13 to 31 m) of the core sediments are oxidized (average oxidation reduction potential (ORP) +170 and +220 mV, respectively), and the ORP values gradually become negative from 3 to 13 m depths (−35 to −180 mV), indicating that anoxic conditions prevail in the shallow aquifers of the Brahmaputra plain. Age determinations suggest that clay horizons at ~10 m depth were deposited at around 2,000 and 5,000 years BP (¹⁴C ages) during the transgressive phase of sea-level change. Elevated concentrations of As, Pb, Zn, Cu, Ni, Cr, and V are present in the silts and clays, probably due to adsorption onto clay particles. Significant concentrations of As occur in black peat and peaty sediments at depths between 9 and 13 m. A strong positive correlation between As and Fe was found in the sediments, indicating As may be adsorbed onto Fe oxides in aquifer sediments.     

The geochemical study of fluvio-lacustrine aquifers in the Kathmandu Basin (Nepal) and the implications for the mobilization of arsenic

The geochemical analyses of fluvial-lacustrine aquifer sediments of the Kathmandu Valley have been made as a step in assessing the environment for the mobilization of arsenic in groundwater. Elements measured by X-ray fluorescence (XRF) include 4 major oxides (Fe₂O₃, TiO₂, CaO, P₂O₅) and 14 trace elements (As, Pb, Zn, Cu, Ni, Cr, V, Sr, Y, Nb, Zr, Th, Sc and TS). Elution tests of 15 selected core samples were also carried out to determine the potential leaching of arsenic from the sediments. The XRF results show that average bulk concentrations of the major oxides and trace elements are similar to modern unconsolidated sediments and average upper continental crust. However, the abundance of elements varies with grain size, with higher concentrations in finer-size grades. Variations in elemental abundances within the basin are strongly controlled by sediment facies. The elution tests show that greater amounts of arsenic are generally eluted from the fine sediments, although the rates are variable. The results overall suggest that As concentrations in the bulk sediments are not a controlling factor for elevated As in the Kathmandu Basin groundwater, and the roles of other factors such as redox conditions and organic matter contents are likely to be more significant.