The first samples from Almahata Sitta showing contacts between ureilitic and chondritic lithologies: Implications for the structure and composition of asteroid 2008 TC3

Almahata Sitta (AhS), an anomalous polymict ureilite, is the first meteorite observed to originate from a spectrally classified asteroid (2008 TC₃). However, correlating properties of the meteorite with those of the asteroid is not straightforward because the AhS stones are diverse types. Of those studied prior to this work, 70–80% are ureilites (achondrites) and 20–30% are various types of chondrites. Asteroid 2008 TC₃ was a heterogeneous breccia that disintegrated in the atmosphere, with its clasts landing on Earth as individual stones and most of its mass lost. We describe AhS 91A and AhS 671, which are the first AhS stones to show contacts between ureilitic and chondritic materials and provide direct information about the structure and composition of asteroid 2008 TC₃. AhS 91A and AhS 671 are friable breccias, consisting of a C1 lithology that encloses rounded to angular clasts (<10 μm to 3 mm) of olivine, pyroxenes, plagioclase, graphite, and metal‐sulfide, as well as chondrules (~130–600 μm) and chondrule fragments. The C1 material consists of fine‐grained phyllosilicates (serpentine and saponite) and amorphous material, magnetite, breunnerite, dolomite, fayalitic olivine (Fo 28‐42), an unidentified Ca‐rich silicate phase, Fe,Ni sulfides, and minor Ca‐phosphate and ilmenite. It has similarities to CI1 but shows evidence of heterogeneous thermal metamorphism. Its bulk oxygen isotope composition (δ¹⁸O = 13.53‰, δ¹⁷O = 8.93‰) is unlike that of any known chondrite, but similar to compositions of several CC‐like clasts in typical polymict ureilites. Its Cr isotope composition is unlike that of any known meteorite. The enclosed clasts and chondrules do not belong to the C1 lithology. The olivine (Fo 75‐88), pyroxenes (pigeonite of Wo ~10 and orthopyroxene of Wo ~4.6), plagioclase, graphite, and some metal‐sulfide are ureilitic, based on mineral compositions, textures, and oxygen isotope compositions, and represent at least six distinct ureilitic lithologies. The chondrules are probably derived from type 3 OC and/or CC, based on mineral and oxygen isotope compositions. Some of the metal‐sulfide clasts are derived from EC. AhS 91A and AhS 671 are plausible representatives of the bulk of the asteroid that was lost. Reflectance spectra of AhS 91A are dark (reflectance ~0.04–0.05) and relatively featureless in VNIR, and have an ~2.7 μm absorption band due to OH^? in phyllosilicates. Spectral modeling, using mixtures of laboratory VNIR reflectance spectra of AhS stones to fit the F‐type spectrum of the asteroid, suggests that 2008 TC₃ consisted mainly of ureilitic and AhS 91A‐like materials, with as much as 40–70% of the latter, and <10% of OC, EC, and other meteorite types. The bulk density of AhS 91A (2.35 ± 0.05 g cm^?3) is lower than bulk densities of other AhS stones, and closer to estimates for the asteroid (~1.7–2.2 g cm^?3). Its porosity (36%) is near the low end of estimates for the asteroid (33–50%), suggesting significant macroporosity. The textures of AhS 91A and AhS 671 (finely comminuted clasts of disparate materials intimately mixed) support formation of 2008 TC₃ in a regolith environment. AhS 91A and AhS 671 could represent a volume of regolith formed when a CC‐like body impacted into already well‐gardened ureilitic + impactor‐derived debris. AhS 91A bulk samples do not show a solar wind component, so they represent subsurface layers. AhS 91A has a lower cosmic ray exposure (CRE) age (~5–9 Ma) than previously studied AhS stones (11–22 Ma). The spread in CRE ages argues for irradiation in a regolith environment. AhS 91A and AhS 671 show that ureilitic asteroids could have detectable ~2.7 μm absorption bands.     

Diatom responses to late-glacial and early-Holocene environmental changes at Kråkenes, western Norway

A stratigraphic diatom sequence is presented for the period from 13,870-9,170 cal BP from Kråkenes Lake, western Norway. Changes in species assemblages are discussed with reference to the changing environmental conditions in the Allerød, Younger Dryas, and the early Holocene and to the development of the aquatic ecosystem. The site is sensitive to acidification, and diatom-based transfer functions are applied to estimate the past pH status. The combination of rapid sediment accumulation together with an excellent calibrated radiocarbon chronology means that the rate of inferred pH change and associated increase in [H⁺] can be assessed and compared with recent, anthropogenically acidified situations.The Allerød diatom assemblages are dominated by benthic taxa particularly Fragilaria species, indicating an unproductive, alkaline, turbid, and immature system. Diatoms are absent in the early part of the Younger Dryas, but subsequently a sparse planktonic flora develops reflecting decreased turbidity and/or increased nutrient supply. A clear sequence of diatom assemblages is seen in the early Holocene. A short-lived peak of Stephanodiscus species indicating a period of increased nutrient availability occurred at ca. 11,500 cal BP. Throughout the early Holocene, acid-tolerant species increasingly replaced less acidophilous, circumneutral taxa.The lake became slightly more acid during the Allerød, but this was statistically insignificant in a trend test involving regression of pH or [H⁺] in relation to age. Diatom-inferred pH declined rapidly during the early Holocene period investigated (9,175-11,525 cal BP) with a statistically significant overall rate of 0.024 pH units per 100 yrs. This consisted of an older (ca. 11,525-10,255 cal BP) phase, where pH fell more rapidly at up to 0.095 pH units per 100 yrs; and a younger phase after ca. 10,500 cal BP where the pH fall was extremely slow (0.008 pH units per 100 yrs) and was not statistically significant.In the Allerød a combination of low catchment productivity together with disturbance, weathering, and minerogenic inwash ensured that the base-cation status remained relatively high. In the Holocene the catchment soils stabilised and base cations were sequestered by terrestrial vegetation and soil. This resulted in reduced base-cation leaching and this, together with the production of organic acids caused the lake to acidify, reaching an equilibrium by ca. 10,000 cal BP.     

Geochemical constraints on restite composition and unmixing in the Velay anatectic granite, French Massif Central

The main anatectic granite of the Velay complex is unique among major French Massif Central Hercynian granitoids in that rather than having an entirely lower crustal source, it formed by mixing between partial melts of the meta-igneous lower crust and ‘upper crustal’ country rock schists and orthogneisses. The geochemical variations in the Velay main anatectic granites cannot, however, be explained by mixing alone as their compositions range to lower SiO₂, with higher Al₂O₃, Fe₂O₃ and TiO₂ and lower Na₂O and CaO, than either end member in mixing. The variations are interpreted as being due to the presence of up to 35% restite in minimum melts of country rock compositions. Primary restites form equilibrium assemblages represented by biotite, ilmenite and surmicaceous enclaves which consist of biotite ± apatite, zircon and almandine. The main anatectic granites more rarely contain schist and gneiss enclaves, quartz resisters and plagioclase restites. Secondary restites are mainly represented by cordierite, and possibly K-feldspar, which formed by recrystallisation of primary biotite-rich restites. The unique characteristics of the Velay main anatectic granites are likely to be due, in part, to its late formation close to the end of the Hercynian orogeny. The metasedimentary lower crust may have become too refractory to yield large volumes of melt following partial melting to form the other major Massif Central granitoids. The heat necessary for partial melting at higher crustal levels was transferred from the lower crust by the intrusion of I-type granites and low volume diorites from the mantle. Upper crustal anatexis was mainly controlled by muscovite breakdown reactions (< 830 to 850 °C) and the liberation of water due to the recrystallisation of biotite to cordierite. The temperatures necessary for biotite breakdown were only achieved locally and resulted in the formation of high-LREE granites.     

Interaction between protokimberlite melts and mantle lithosphere: Evidence from mantle xenoliths from the Dalnyaya kimberlite pipe,Yakutia (Russia)

The Dalnyaya kimberlite pipe(Yakutia,Russia) contains mantle peridotite xenoliths(mostly Iherzolites and harzburgites) that show both sheared porphyroclastic(deformed) and coarse granular textures,together with ilmenite and clinopyroxene megacrysts.Deformed peridotites contain high-temperature Fe-rich clinopyroxenes,sometimes associated with picroilmenites,which are products of interaction of the lithospheric mantle with protokimberlite related melts.The orthopyroxene-derived geotherm for the lithospheric mantle beneath Dalnyaya is stepped similar to that beneath the Udachnaya pipe.Coarse granular xenoliths fall on a geotherm of 35 mWm-2 whereas deformed varieties yield a 45 mWm-2)geotherm in the 2-7.5 GPa pressure interval.The chemistry of the constituent minerals including garnet,olivine and clinopyroxene shows trends of increasing Fe~#(=Fe/(Fe+Mg))with decreasing pressure.This may suggest that the interaction with fractionating protokimberlite melts occurred at different levels.Two major mantle lithologies are distinguished by the trace element patterns of their constituent minerals,determined by LA-ICP-MS.Orthopyroxenes,some clinopyroxenes and rare garnets are depleted in Ba,Sr,HFSE and MREE and represent relic lithospheric mantle.Re-fertilized garnet and clinopyroxene are more enriched.The distribution of trace elements between garnet and clinopyroxene shows that the garnets dissolved primary orthopyroxene and clinopyroxene.Later high temperature clinopyroxenes related to the protokimberlite melts partially dissolved these garnets.Olivines show decreases in Ni and increases in Al,Ca and Ti from Mg-rich varieties to the more Fe-rich,deformed and refertilized ones.Minerals showing higher Fe~#(0.11-0.15) are found within intergrowths of low-Cr ilmenite-clinopyroxene-garnet related to the crystallization of protokimberlite melts in feeder channels.In P-f(O_2) diagrams,garnets and Cr-rich clinopyroxenes indicate reduced conditions at the base of the lithosphere at-5 log units below a FMQ buffer.However,Cr-poor clinopyroxenes,together with ilmenite and some Fe-Ca-rich garnets,demonstrate a more oxidized trend in the lower part of lithosphere at-2 to 0 log units relative to FMQ.Clinopyroxenes from xenoliths in most cases show conditions transitional between those determined for garnets and megacrystalline Cr-poor suite.The relatively low diamond grade of Dalnyaya kimberlites is explained by a high degree of interaction with the oxidized protokimberlite melts,which is greater at the base of the lithosphere.     

MicroRaman spectroscopy of diamond and graphite in Almahata Sitta and comparison with other ureilites

This work is the first detailed study of carbon phases in the ureilite Almahata Sitta (sample #7). We present microRaman data for diamond and graphite in Almahata Sitta, seven unbrecciated ureilites, and two brecciated ureilites. Diamond in Almahata Sitta was found to be distinct from that in unbrecciated and brecciated ureilites, although diamond in unbrecciated and brecciated ureilites is indistinguishable. Almahata Sitta diamond shows a peak center range of 1318.5–1330.2 cm^?1 and a full width at half maximum (FWHM) range of 6.6–17.4 cm^?1, representing a shock pressure of at least 60 kbar. The actual peak shock pressure may be higher than this due to postshock annealing, if shock synthesis is the source of ureilite diamonds. Diamond in unbrecciated and brecciated ureilites have peak center wave numbers closer to terrestrial kimberlite diamond, but show a wider range of FWHM than Almahata Sitta. The larger peak shift observed in Almahata Sitta may indicate the presence of lonsdaleite. Alternatively, the lower values in brecciated ureilites may be evidence of an annealing step either following the initial diamond‐generating shock or as a consequence of heating during reconsolidation of the breccia. Graphite in Almahata Sitta shows a G‐band peak center range of 1569.1–1577.1 cm^?1 and a G‐band FWHM range of 24.3–41.6 cm^?1 representing a formation temperature of 990 ± 120 °C. Amorphous carbon was also found. We examine the different theories for diamond formation in ureilites, such as chemical vapor deposition and shock origin from graphite, and explore explanations for the differences between Almahata Sitta and other ureilites.     

Lead isotope systematics of ore systems of the Macquarie Arc — Implications for arc substrate

The Macquarie Arc of New South Wales hosts several major Au and Cu deposits. We present new Pb isotope results for Cadia, the Copper Hill, Little Copper Hill and Cowal deposits, along with data from the CSIRO database. The results generally plot close to established mantle growth curves and are similar to oceanic basalts. Data for individual deposits mostly have Pb model ages consistent with independent age constraints on mineralization. Intrusions associated with the Early Silurian mineralization at Cadia and Goonumbla have narrow and distinct Pb isotope signatures that we interpret to be the result of partial melting of already LILE-enriched mantle-like sources. The data suggest that deposits of the Macquarie Arc derived Pb from one or more long-lived mantle-like Pb isotope reservoirs without significant contributions of crustal Pb prior to the Benambran Orogeny.Data for the Copper Hill deposits includes unradiogenic, possibly old Pb and supports previous workers who suggested that old MORB-like basalts may occur at depth in the area. The Peak Hill deposit has the most unradiogenic signature and has the lowest ²⁰⁸Pb/²⁰⁴Pb and ²⁰⁷Pb/²⁰⁴Pb. These signatures closely match Cambrian MORB-like basalts in the Koonenberry Belt and are unlike Cambrian mafic rocks in Victoria. Similar rocks could form part of the substrate to other parts of the Macquarie Arc.     

Searching for nonlocal lithologies in the Apollo 12 regolith: A geochemical and petrological study of basaltic coarse fines from the Apollo lunar soil sample 12023,155

New data from a petrological and geochemical examination of 12 coarse basaltic fines from the Apollo 12 soil sample 12023,155 provide evidence of additional geochemical diversity at the landing site. In addition to the bulk chemical composition, major, minor, and trace element analyses of mineral phases are employed to ascertain how these samples relate to the Apollo 12 lithological basalt groups, thereby overcoming the problems of representativeness of small samples. All of the samples studied are low‐Ti basalts (0.9–5.7 wt% TiO₂), and many fall into the established olivine, pigeonite, and ilmenite classification of Apollo 12 basaltic suites. There are five exceptions: sample 12023,155_1A is mineralogically and compositionally distinct from other Apollo 12 basalt types, with low pigeonite REE concentrations and low Ni (41–55 ppm) and Mn (2400–2556 ppm) concentrations in olivine. Sample 12023,155_11A is also unique, with Fe‐rich mineral compositions and low bulk Mg# (=100 × atomic Mg/[Mg+Fe]) of 21.6. Sample 12023,155_7A has different plagioclase chemistry and crystallization trends as well as a wider range of olivine Mg# (34–55) compared with other Apollo 12 basalts, and shows greater similarities to Apollo 14 high‐Al basalts. Two other samples (12023,155_4A, and _5A) are similar to the Apollo 12 feldspathic basalt 12038, providing additional evidence that feldspathic basalts represent a lava flow proximal to the Apollo 12 site rather than material introduced by impacts. We suggest that at least one parent magma, and possibly as many as four separate parent magmas, are required in addition to the previously identified olivine, pigeonite, and ilmenite basaltic suites to account for the observed chemical diversity of basalts found in this study.     

Phreatomagmatic to Strombolian eruptive activity of basaltic cinder cones: Montaña Los Erales, Tenerife, Canary Islands

Phreatomagmatic activity results from the interaction of magma and external water during a volcanic eruption and is a frequent eruptive phenomenon worldwide. Such ‘fuel-coolant’ reactions change the eruptive dynamics, thus generating particles that reflect the degree of explosivity. Different eruptive phases may thus be identified from deposits, allowing us to reconstruct conditions that prevailed in the past and use these to predict the level of explosivity in a given geological setting in the future.A detailed study of the deposits from Montaña Los Erales, a 70 m-high Quaternary cinder cone belonging to a rift-related chain of vents in the Bandas del Sur region, in Southeast Tenerife, was undertaken. Field observations on excavated sections and SEM analysis of tephra suggest that the eruption style changed progressively from an initial phreatomagmatic phase, through a transitional stage, to one that was entirely Strombolian. To investigate the causes and the nature of these changes in eruptive style, products from each major unit were analysed for their morphology using hand specimen observations, secondary electron microscopy, backscatter electron microscopy, and reflected light microscopy to examine fragment size variation, fragment morphologies, vesicularity, and the level of secondary hydrous alteration (e.g. palagonitisation and zeolitisation). Study results demonstrate that the initial phase of activity was largely driven by magma–water interaction, where magma may have interacted with a lens of fresh ground- or surface water. With proceeding eruptive activity the water became exhausted, giving rise to an entirely Strombolian eruptive style.Examples of phreatomagmatic activity that occur on typical rift-related basaltic vent alignments are not infrequent in the Canary Islands. These vent systems usually erupt in Strombolian fashion, producing scoria and lava flows that do not generally extend far beyond the vent area. However, aligned feeders may intersect different strata, structural features, and different hydrological situations, thus giving rise to activity that is less predictable in setting, intensity, and duration. The occurrence of phreatomagmatism in an otherwise low-explosivity basaltic eruptive environment increases the need for awareness of the geo-hydrological situation in volcanically active areas. Studying the past eruptive history is therefore essential to derive realistic scenarios for future vulnerability evaluation and risk assessment, especially in densely populated areas like the Canary Islands.