Seasonal changes in camera-based indices from an open canopy black spruce forest in Alaska,and comparison with indices from a closed canopy evergreen coniferous forest in Japan

Evaluation of the carbon, water, and energy balances in evergreen coniferous forests requires accurate in situ and satellite data regarding their spatio-temporal dynamics. Daily digital camera images can be used to determine the relationships among phenology, gross primary productivity (GPP), and meteorological parameters, and to ground-truth satellite observations. In this study, we examine the relationship between seasonal variations in camera-based canopy surface indices and eddy-covariance-based GPP derived from field studies in an Alaskan open canopy black spruce forest and in a Japanese closed canopy cedar forest. The ratio of the green digital number to the total digital number, hue, and GPP showed a bell-shaped seasonal profile at both sites. Canopy surface images for the black spruce forest and cedar forest mainly detected seasonal changes in vegetation on the floor of the forest and in the tree canopy, respectively. In contrast, the seasonal cycles of the ratios of the red and blue digital numbers to the total digital numbers differed between the two sites, possibly due to differences in forest structure and leaf color. These results suggest that forest structural characteristics, such as canopy openness and seasonal forest-floor changes, should be considered during continuous observations of phenology in evergreen coniferous forests.     

2-D and 3-D modelling of wide-angle seismic data: an example from the Vøring volcanic passive margin

This study presents the modelling of 2-D and 3-D wide-angle seismic data acquired on the complex, volcanic passive margin of the Vøring Plateau, off Norway. Three wide-angle seismic profiles were shot and recorded simultaneously by 21 Ocean Bottom Seismometers, yielding a comprehensive 3-D data set, in addition to the three in-line profiles. Coincident multi-channel seismic profiles are used to better constrain the modelling, but the Mesozoic and deeper structures are poorly imaged due to the presence of flood basalts and sills. Velocity modelling reveals an unexpectedly large 30 km basement high hidden below the flood basalt. When interpreted as a 2-D structure, this basement high produces a modelled gravity anomaly in disagreement with the observed gravity. However, both the gravity and the seismic data suggest that the structure varies in all three directions. The modelling of the entire 3-D set of travel times leads to a coherent velocity structure that confirms the basement high; it also shows that the abrupt transition to the slower Cretaceous basin coincides in position and orientation with the fault system forming the Rån Ridge. The positive gravity anomaly over the Rån Ridge originates from the focussed and coincident elevation of the high velocity lower crust and pre-Cretaceous basement. Although the Moho is not constrained by the seismic data, the gravity modelled from the 3-D velocity model shows a better fit along the profiles. This study illustrates the interest of a 3-D acquisition of wide-angle seismic over complex structures and the benefit of the subsequent integrated interpretation of the seismic and gravity data.     

Study of crop coefficient and the ratio of soil evaporation to evapotranspiration in an irrigated maize field in an arid area of Yellow River Basin in China

A field experiment was conducted in a maize field in 2006 in an arid area of the Yellow River Basin in China. The daytime evapotranspiration (ET_c) and soil evaporation beneath the maize canopy (E _g) were measured by Bowen ratio energy balance method and micro-lysimeters, respectively. The results showed that the total ET_c during maize growth season was 696 mm, and the maximum values occurred at about 90–140 days after sowing. The crop coefficient (K _c), which was calculated from the ratio of ET_c to reference evapotranspiration (ET₀), was quite different from the values reported by other researchers in similar climate areas, with average values of 0.34, 0.47, 1.0 and 0.9 for initial, development, mid-season and late-season stages, respectively. High correlations between leaf area index (LAI) and average K _c for every 4 days were obtained. The total E _g was 201.4 mm with average values ranged from 0.92 to 2.05 for four growth stages of maize; and accounted for around 28.9 % of ET_c. The ratio E _g/ET_c showed high negative relationship with LAI. These results were very important in precise management of irrigation for maize in Yellow River Basin areas.     

The role of the grain boundary at chemical and isotopic fronts in marble during contact metamorphism

Carbon and oxygen isotopic profiles around a low pressure metasomatic wollastonite reaction front in a marble of the Hida metamorphic terrain, central Japan, display typical metamorphic fluid-enhanced isotopic zonations. Isotopic profiles obtained from detailed microscale analyses perpendicular to the chemical reaction front in calcite marble show that diffusion-enhanced isotopic exchange may control these profiles. Carbon and oxygen isotopic behaviour in grain boundaries is remarkably different. Oxygen isotopic troughs (¹⁸O depleted rims) around the calcite-grain boundaries are widely observed in this contact aureole, demonstrating that diffusion of oxygen in calcite grain boundary dominates over lattice diffusion in calcite. In contrast, no difference is observed in carbon isotopic profiles obtained from grain cores and rims. There is thus no specific role of the grain boundary for diffusion of carbonic species in the metamorphic fluid during transportation. Carbon chemical species such as CO₂ and CO₃ ions in metamorphic fluid migrate mainly through lattice diffusion. The carbon and oxygen isotope profiles may be modelled by diffusion into a semi-infinite medium. Empirically lattice diffusion of oxygen isotopes is almost six times faster than that of carbon isotopes, and oxygen grain-boundary diffusion is ten times faster than oxygen lattice diffusion. Oxygen isotopic results around the wollastonite vein indicate that migration of the metamorphic fluid into calcite marble was small and was parallel to the aquifer. From the stability of wollastonite and the attainment of oxygen isotopic equilibrium, we suggest that diffusion of oxygen occurred through an aqueous fluid phase. The timescale of formation of the oxygen isotopic profile around the wollastonite vein is calculated to be about 0.76 × 10⁶ years using the experimentally determined diffusion constant. Received: 14 January 1997 / Accepted: 23 April 1998     

Nitrogen and phosphorus distributions across the thermohaline front in Kii Channel in winter

We have studied nitrogen and phosphorus distributions across the thermohaline front in Kii Channel in winter by using engine-cooling sea water of a ferry boat. On Dec. 1986 and Jan. 1987, differences of PO₄–P and DIN across the front are recognized. Especially in the latter case, differences of nutrients concentrations across the front are very obvious. But differences of nutrients across the front on Feb. 1986, Feb. and Mar. 1987 are not obvious. Inspite of winter,Akashiwo had happened in Osaka Bay, nutrients mostly have already been utilized by phytoplankton in inner part of Osaka Bay. Consequently, differences of nutrients concentrations across the front are nearly zero.     

Silicate to Nitrate Ratio of the Upper Sub-Arctic Pacific and the Bering Sea Basin in Summer: Its Implication for Phytoplankton Dynamics

Consumption of silicate and nitrate (Si:N molar ratio) in the upper layer of the pelagic subarctic Pacific in summer was evaluated by a regression analysis of silicate vs. nitrate concentrations at the upper 100 m depth. Based on data of three cruises, the pelagic subarctic Pacific can be classified into two groups. First group is characterized by roughly 1:1 consumption of silicate and nitrate, and occupies rather larger area of subarcfic Pacific, i.e., the Gulf of Alaska and the Western Subarctic gyre (averaged slope of Si:N linear regression: 1.21, n = 10 and 1.45, n = 9, respectively). Second group is the regions of the Bering Sea basin and the Oyashio region, and showed higher silicate consumption compared to that of nitrate (averaged slope of Si:N linear regression: 2.14, n = 9 and 2.36, n = 3, respectively). The Si:N difference observed is possibly attributed to relative contribution of diatoms production among the phytoplankton assemblages in the regions, i.e., dominance of diatoms production in the regions of the second group. Higher accumulation of ammonium at the bottom of euphotic layer in the summer Bering Sea basin would also contribute to increase consumption ratio of Si:N amounts.     

Long-period waves in the vicinity of Onagawa Bay (I)

To investigate the response characteristics of a bay to tsunamis, field measurements of long-period waves have been carried out at Onagawa and Okachi Bays, both of which face the Pacific Ocean in northern Japan. In Onagawa Bay, the observed transfer function is in good agreement with the prediction based on the one-dimensional numerical model, in the period range larger than about 15 minutes. The response of shorter periods seems to be influenced by the two-dimensionality of the bay. The oscillations within Onagawa Harbor are also discussed with respect to the relative amplitude and phase at two stations inside the harbor and it is estimated that the reflection coefficient at the waterfront is about 0.7. In Okachi Bay, the oscillations in the period range larger than about 10 minutes could be explained by a Y-shaped model of the bay. The dominant oscillations offshore of these two-bays are found to be the mode with the motion predominantly in the direction normal to the shelf orientation, and the estimated power spectral density of incoming waves in deep water varies asf ^–2,f being the frequency. The waves of lateral modes, such as edge waves on the shelf, are small and of minor importance to generate bay oscillations of longer periods.     

Biological community and sediment fatty acids associated with the deep-sea whale skeleton at the Torishima Seamount

A whale skeleton was discovered on the flat-topped summit of the Torishima Seamount, 4037 m deep, northwest Pacific Ocean, during a dive by the submersibleShinkai 6500 in 1992. The skeleton was encrusted with mytilid mussels and harbored benthic animals such as galatheid crabs, echinoderms, sea anemones, and unidentifiable tube worms. The whale skeleton was revisited in 1993. Sediment samples were collected to outline the chemical-microbial distribution in the sediment associated with the skeleton. In the sediment, there was a gradient of sulfide concentration with the peak of 20 n moles per gram sediment just beneath a bone. Corresponding gradients were observed in thiosulfate-oxidizing enzyme activity, bacterial colony counts and fatty acid amounts. Direct analysis of the sediment fatty acid composition suggested the occurrence of methane-oxidizing bacteria and sulfur-reducing bacteria in close association with the whale skeleton. These observations imply that the methane and sulfides were formed during the saprogenic process and utilized for the chemosynthetic bacterial production to feed the whale skeleton-animal community.     

Stability of goaf-side entry driving in 800-m-deep island longwall coal face in underground coal mine

Goaf-side entry driving in underground coal mines could greatly improve coal recovery rates. However, it becomes more difficult to maintain stability, especially in deep coal mines. Pillar width plays a pivotal role in the stability of goaf-side entry driving. To obtain a reasonable and appropriate narrow pillar width, theoretical calculations of the widths of mining-damaged zone and limit equilibrium zone in the pillar are derived according to limit equilibrium theory. Based on the stability issues of goaf-side entry driving in the first island longwall coal face (LCF) at a depth of 800 m below the surface in Guqiao Coal Mine in China, a numerical model is established by FLAC software to analyze the stability of the surrounding rock of goaf-side entry driving during excavation, using various coal pillar widths and support schemes. The results obtained from theoretical calculations, numerical simulation, and engineering practice indicate that an 8-m-wide coal pillar is relatively reasonable, appropriate, and feasible. Field measurements show that deformations of the surrounding rock could be efficiently controlled 31 days after the support schemes were implemented in goaf-side entry driving with an 8-m-wide narrow pillar along the adjacent goaf side with a compaction duration of 10 months. The mining influence range of the overlying LCF on the stability of goaf-side entry driving is found to be the area from 50 m ahead of the LCF to 70 m behind the LCF as it passes over the measurement point.