The ocean/continent transition along a profile through the Lofoten basin,Northern Norway

The Cenozoic margins of the Norwegian-Greenland Sea offer ideal conditions for passive margin studies. A series of structural elements, first observed on these margins, led to the concept of volcanic passive margins. Questions still remain about the development of such features and the location of the boundary between oceanic and continental crust. Despite the thin sediment cover of the margins, seismic reflection data are not able to image the deeper structures due to the occurrence of igneous rocks at shallow depth.This paper presents a 320-km long profile perpendicular to the strike of the main structural units of the Lofoten Margin in Northern Norway. A geological model is proposed, based on observations made with ocean bottom seismographs, which recorded seismic refraction data and wide angle reflections, along with a seismic reflection profile covering the same area. Ray-tracing was used to calculate a geophysical model from the shelf area into the Lofoten basin. The structures typical of a volcanic passive margin were found, showing that the Lofoten Margin was influenced by increased volcanic activity during its evolution. The ocean/continent transition is located in a 30-km wide zone landwards of the Vøring Plateau escarpment.The whole margin is underlain by a possibly underplated, high velocity layer. Evidence for a pre-rift sediment basin landwards of the escarpment, overlain by basalt flows, was seen. These structural features, related to extensive volcanism on the Lofoten Margin, are not as distinct as further south along the Norwegian Margin. Viewed in the light of the hot-spot theory of White and McKenzie (1989) the Lofoten Margin can be interpreted as a transitional type between volcanic and non-volcanic passive margin.     

Precise Positioning of Ocean Bottom Seismometer by Using Acoustic Transponder and CTD

We have obtained precise estimates of the position of Ocean Bottom Seismometers (OBS) on the sea bottom. Such estimates are usually uncertain due to their free falling deployment. This uncertainty is small enough, or is correctable, with OBS spacing of more than 10 km usually employed in crustal studies. But, for example, if the spacing is only 200 m for OBS reflection studies, estimates of the position with an accuracy of the order of 10 m or more is required.The determination was carried out with the slant range data, ship position data and a 1D acoustic velocity structure calculated from Conductivity–Temperature–Depth (CTD) data, if they are available. The slant range data were obtained by an acoustic transponder system designed for the sinker releasing of the OBS or travel time data of direct water wave arrivals by airgun shooting. The ship position data was obtained by a single GPS or DGPS. The method of calculation was similar to those used for earthquake hypocenter determination.The results indicate that the accuracy of determined OBS positions is enough for present OBS experiments, which becomes order of 1 m by using the DGPS and of less than 10 m by using the single GPS, if we measure the distance from several positions at the sea surface by using a transponder system which is not designed for the precise ranging. The geometry of calling positions is most important to determine the OBS position, even if we use the data with larger error, such as the direct water wave arrival data. The 1D acoustic velocity structure should be required for the correct depth of the OBS. Although it is rare that we use a CTD, even an empirical velocity structure works well.     

Distribution of Phyllosoma Larvae (Crustacea: Decapoda: Palinuridae,Scyllaridae and Synaxidae) in the Western North Pacific

Phyllosoma larvae were identified and their distribution was examined, based on the larvae in ichthyoplankton samples collected in the Japanese Eel Expedition to the spawning area of A. japonica in the western North Pacific from August 30 to September 13, 1986 (Leg. 1), and from September 22 to 25, 1986 (Leg. 2), on board the R/V Hakuho-maru. Phyllosoma larvae belonged to 3 families (Scyllaridae, Palinuridae and Synaxidae) representing 6 genera and 14 species. A total of 336 palinurid and synaxid phyllosoma larvae were collected, of which 233 larvae (about 70%) were identical with P. longipes s. l, while a total of 362 scyllarid phyllosoma larvae were collected, of which 274 larvae (about 76%) were identical with S. cultrifer. Phyllosoma larvae of P. longipes s. l and S. cultrifer showed a similar distribution to each other. The larvae were abundant in the water close to Mariana Islands, although late stage examples were abundant in waters of Luzon and eastern Taiwan. Distributions of these larvae may be related intimately with the North Equatorial Current existing along 15°N. The North Equatorial Current approaches the eastern coast of the Philippines and then separates into two branches of northward and southward flows. The northward flow contributes to generating the Kuroshio Current while the southward flow goes to generate the Mindanao Current. Judging from distributions of phyllosoma larvae in the present study, it is assumed that the larvae of the above two species may have been released in Mariana Islands and transported westward from there through the North Equatorial Current. These larvae may then be transported to eastern Taiwanese waters.     

Electrokinetic phenomena associated with a water injection experiment at the Nojima fault on Awaji Island, Japan

Abstract Self-potential variations were measured to estimate the magnitude of electrokinetic and hydrological parameters (zeta potential and permeability) of the Nojima Fault zone in Awaji, Japan. The study observed self-potential variations that seemed to be associated with water flow from the injection well to the fracture zone, which were induced by turning the injection on and off. Amplitudes of the variations were a few to 0.03 V across 320–450 m dipoles. These variations can be explained well with an electrokinetic model. The quantity k/ζ (permeability/zeta potential) is in the range 1.6 × 10⁻¹³− 5.4 × 10⁻¹³ m²/V. Permeability of the Nojima fault zone can be estimated as approximately 10⁻¹⁶–10⁻¹⁵ m² on the assumption that the zeta potential is in the range –0.01 to –0.001 V.     

Geology of the summit limestone of Mount Qomolangma (Everest) and cooling history of the Yellow Band under the Qomolangma detachment

Abstract   Newly discovered peloidal limestone from the summit of Mount Qomolangma (Mount Everest) contains skeletal fragments of trilobites, ostracods and crinoids. They are small pebble-sized debris interbedded in micritic bedded limestone of the Qomolangma Formation, and are interpreted to have been derived from a bank margin and redeposited in peri-platform environments. An exposure of the Qomolangma detachment at the base of the first step (8520 m), on the northern slope of Mount Qomolangma was also found. Non-metamorphosed, strongly fractured Ordovician limestone is separated from underlying metamorphosed Yellow Band by a sharp fault with a breccia zone. The ⁴⁰Ar–³⁹Ar ages of muscovite from the Yellow Band show two-phase metamorphic events of approximately 33.3 and 24.5 Ma. The older age represents the peak of a Barrovian-type Eo-Himalayan metamorphic event and the younger age records a decompressional high-temperature Neo-Himalayan metamorphic event. A muscovite whole-rock ⁸⁷Rb–⁸⁶Sr isochron of the Yellow Band yielded 40.06 ± 0.81 Ma, which suggests a Pre-Himalayan metamorphism, probably caused by tectonic stacking of the Tibetan Tethys sediments in the leading margin of the Indian subcontinent. Zircon and apatite grains, separated from the Yellow Band, gave pooled fission-track ages of 14.4 ± 0.9 and 14.4 ± 1.4 Ma, respectively. These new chronologic data indicate rapid cooling of the hanging wall of the Qomolangma detachment from approximately 350°C to 130°C during a short period (15.5–14.4 Ma).     

Caledonide development offshore–onshore Svalbard based on ocean bottom seismometer, conventional seismic, and potential field data

The western Barents Sea and the Svalbard archipelago share a common history of Caledonian basement formation and subsequent sedimentary deposition. Rock formations from the period are accessible to field study on Svalbard, but studies of the near offshore areas rely on seismic data and shallowdrilling. Offshore mapping is reliable down to the Permian sequence, but multichannel reflection seismic data do not give a coherent picture of older stratigraphy. A survey of 10 Ocean Bottom Seismometer profiles was collected around Svalbard in 1998. Results show a highly variable thickness of pre-Permian sedimentary strata, and a heterogeneous crystalline crust tied to candidates for continental sutures or major thrust zones. The data shown in this paper establish that the observed gravity in some parts of the platform can be directly related to velocity variations in the crystalline crust, but not necessarily to basement or Moho depth. The results from three new models are incorporated with a previously published profile, to produce depth-to-basement and -Moho maps south of Svalbard. There is a 14 km deep basement located approximately below the gently structured Upper Paleozoic Sørkapp Basin, bordered by a 7 km deep basement high to the west, and 7–9 km depths to the north. Continental Moho-depth range from 28 to 35 km, the thickest crust is found near the island of Hopen, and in a NNW trending narrow crustal root located between 19°E and 20°E, the latter is interpreted as a relic of westward dipping Caledonian continental collision or major thrusting. There is also a basement high on this trend. Across this zone, there is an eastward increase in the V_P, V_P/V_S ratio, and density, indicating a change towards a more mafic average crustal composition. The northward basement/Moho trend projects onto the Billefjorden Fault Zone (BFZ) on Spitsbergen. The eastern side of the BFZ correlates closely with coincident linear positive gravity and magnetic anomalies on western Ny Friesland, apparently originating from an antiform with high-grade metamorphic Caledonian terrane. A double linear magnetic anomaly appears on the BFZ trend south of Spitsbergen, sub-parallel to and located 10–50 km west of the crustal root. Based on this correlation, it is proposed that the suture or major thrust zone seen south of Svalbard correlates to the BFZ. The preservation of the relationship between the crustal suture, the crustal root, and upper mantle reflectivity, challenges the large-offset, post-collision sinistral transcurrent movement on the BFZ and other trends proposed in the literature. In particular, neither the wide-angle seismic data, nor conventional deep seismic reflection data south of Svalbard show clear signs of major lateral offsets, as seen in similar data around the British Isles.     

Timescales and mechanisms of fluid infiltration in a marble: an ion microprobe study

Using a recently developed ion microprobe technique, a detailed oxygen isotope map of calcite grains in a coarse-grained marble has been constructed, supported by trace element (Mn, Sr, Fe) analysis and cathodoluminescence (CL) imaging, in order to constrain scales of oxygen isotope equilibrium, timescales and mechanisms of metamorphic fluid infiltration, and fluid sources and pathways. Results are compared with a previous study of this sample (Wada 1988) carried out using a cryo-microtome technique and conventional oxygen isotope analysis. The marble, from the high temperature/low pressure Hida metamorphic belt in north-central Japan, underwent granulite facies followed by amphibolite facies metamorphic events, the latter associated with regional granite intrusion. The CL imaging indicates two types of calcite, a yellow luminescing (YLC) and a purple luminescing (PLC) variety. The YLC, which occupies grain boundaries, fractures, replacement patches, and most of the abundant deformation twin lamellae, post-dates the dominant PLC calcite and maps out fluid pathways. Systematic relationships were established between oxygen isotope and trace element composition, calcite type and texture, based on 74 ¹⁸O/¹⁶O and 17 trace element analyses with 20–30 μ m spatial resolution. The YLC is enriched in Mn and Fe, and depleted in ¹⁸O and Sr compared to PLC, and is much more ¹⁸O depleted than is indicated from conventional analyses. Results are interpreted to indicate infiltration of ¹⁸O-depleted (metamorphic or magmatic) fluid (initial δ¹⁸O = 9‰–10.5‰) along grain boundaries, fractures and deformation twin lamellae, depleting calcite grains in Sr and enriching them in Mn and Fe. The sample is characterised by gross isotopic and elemental disequilibrium, with important implications for the application of chromatographic theory to constrain fluid fluxes in metacarbonate rocks. Areas of PLC unaffected by “short-circuiting” fluid pathways contain oxygen diffusion profiles of ∼10‰/∼200 μm in grain boundary regions or adjacent to fractures/patches. When correction is made for estimated grain boundary/fracture and profile orientation in 3D, profiles are indistinguishable within error. Modelling of these profiles gives consistent estimates of Dt (where D is the diffusion coefficient and t is time) of ∼0.8 × 10⁻⁸ m², from which, using experimental data for oxygen diffusion in calcite, timescales of fluid transport along grain boundaries at amphibolite facies temperatures of ∼10³ to ∼10⁴ years are obtained. These short timescales, which are much shorter than plausible durations of metamorphism, imply that rock permeabilities may be transiently much higher during fluid flow than those calculated from time integrated fluid fluxes or predicted from laboratory measurements. The preservation of ¹⁸O/¹⁶O profiles requires either rapid cooling rates (∼100–600 °C/million years), or, more plausibly, loss of grain boundary fluid such that a dry cooling history followed the transient passage of fluid. The δ¹⁸O/trace element correlations are also consistent with volume diffusion-controlled transport in the PLC. Fluid transport and element exchange occurred by two inter-related mechanisms on short timescales and on different lengthscales – long-distance flow along cracks, grain boundaries and twin lamellae coupled to ∼200 μm-scale volume diffusion of oxygen. Received: 8 December 1997 / Accepted: 18 May 1998     

Groundwater microtemperature in earthquake regions

Microtemperature measurements of groundwater with a relative precision better than 1/1000°C have been made in several seismically active areas in Japan. The measured temperatures show clear coseismic signals as well as a correlation with atmospheric pressure. Simultaneous observations at various depths have shown that these temperature changes were not induced by simple groundwater level changes. Also, distinctive signals occurred before several earthquakes and seem to be caused by a different mechanism than the coseismic signals. The microtemperature at some observation sites shows excellent correlation with records of nearby sensitive borehole strainmeters. Simultaneous recording of microtemperature and strain has been initiated in some boreholes.