Interferometric measurement of ionization in a grassfire

Grassfire plumes are weakly ionized gas. The ionization in the fire plume is due to thermal and chemi-ionization of incumbent species, which may include graphitic carbon, alkalis and thermally excited radicals, e.g., methyl. The presence of alkalis (e.g., potassium and sodium) in the fires makes thermal ionization a predominant electron producing mechanism in the combustion zone. Alkalis have low dissociation and ionization potentials and therefore require little energy to thermally decompose and give electrons. Assuming a Maxwellian velocity distribution of flame particles and electron-neutral collision frequency much higher than plasma frequency, the propagation of radio waves through a grassfire is predicted to have attenuation and phase shift. Radio wave propagation measurements were performed in a moderate intensity (554 kW m^?1) controlled grassfire at 30- and 151-MHz frequencies on a 44 m path using a radio wave interferometer. The maximum temperature measured in the controlled burn was 1071 K and the observed fire depth was 0.9 m. The radio wave interferometer measured attenuation coefficients of 0.033 and 0.054 dB m^?1 for 30- and 151-MHz, respectively. At collision frequency of 1.0 × 10¹¹ s^?1, maximum electron density was determined to be 5.061 × 10¹⁵ m^?3.     

Seasonal variations of the ocean surface circulation in the vicinity of Palau

The surface circulation in the western equatorial Pacific Ocean is investigated with the aim of describing intra-annual variations near Palau (134°30′ E, 7°30′ N). In situ data and model output from the Ocean Surface Currents Analysis—Real-time, TRIangle Trans-Ocean buoy Network, Naval Research Laboratory Layered Ocean Model and the Joint Archive for Shipboard ADCP are examined and compared. Known major currents and eddies of the western equatorial Pacific are observed and discussed, and previously undocumented features are identified and named (Palau Eddy, Caroline Eddy, Micronesian Eddy). The circulation at Palau follows a seasonal variation aligned with that of the Asian monsoon (December–April; July–October) and is driven by the major circulation features. From December to April, currents around Palau are generally directed northward with speeds of approximately 20 cm/s, influenced by the North Equatorial Counter-Current and the Mindanao Eddy. The current direction turns slightly clockwise through this boreal winter period, due to the northern migration of the Mindanao Eddy. During April–May, the current west of Palau is reduced to 15 cm/s as the Mindanao Eddy weakens. East of Palau, a cyclonic eddy (Palau Eddy) forms producing southward flow of around 25 cm/s. The flow during the period July to September is disordered with no influence from major circulation features. The current is generally northward west of Palau and southward to the east, each with speeds on the order of 5 cm/s. During October, as the Palau Eddy reforms, the southward current to the east of Palau increases to 15 cm/s. During November, the circulation transitions to the north-directed winter regime.     

新疆东准噶尔石炭纪火山机构类型与时限

东准噶尔卡拉麦里大气田的主要储层是石炭纪火山岩,石炭纪古火山机构的样式与组合特征,与火山岩储层展布关系密切。野外调查表明,隐爆角砾岩是东准噶尔石炭纪古火山机构最常见的标志之一。东准噶尔石炭纪古火山机构类型主要有中心式、裂隙式和裂隙-中心式等样式。中心式火山机构以大石头层状火山、柯克巴斯套锥状火山最为典型;巴塔玛依内山附近沿断裂分布的带状火山岩具有裂隙式喷发的特征;东黑山火山具有火山口串珠状排列特征,是裂隙-中心式喷发的产物。大石头地区原缪林托凯陶山组火山岩的锆石SHRIMP U-Pb年龄为345.6±7.1 Ma,而已知巴塔玛依内山组火山岩年龄是350.0±6.3Ma,因此东准噶尔火山活动的主要时期是早石炭世。     

The glaciotectonic deformation of Quaternary sediments by fault-propagation folding

Fault-propagation folding is an important yet seldom recognised structural style within sediments affected by glacier-induced deformation. Fault-propagation folds develop in the hanging wall of low angle thrust faults and compensate part of the slip along the fault. Field examples are recognised across northern Europe, in glaciotectonic complexes of north Germany, Wales and the Isle of Man. The recognition of the fault-propagation fold mechanism in glaciotectonic deformation is important because resultant structures are related to exactly the same phase of deformation (i.e. the same phase of ice advance), and thus play a critical role in analyses of the temporal and spatial evolution of glacier-induced deformation. Some field examples show monoclinal geometries that are in good agreement with predictions of trishear kinematic theory. The trishear approach is appropriate to model these structures because the structures analysed in the field and simulated below show characteristics that are compatible with fault-propagation folds that were produced by trishear kinematics. The curved forelimb and the monocline geometry of the fault-propagation folds fit to the trishear model. The occurrence of footwall synclines is also in good agreement with trishear kinematics. These synclines show the typical thickening of the strata in the hinge. With respect to the modelling output, most important factors for the structural evolution of the fault-propagation folds is the ramp angle of the thrust, the position of the tip line and the propagation-to-slip ratio along the fault. This fits to observations made by previous studies at large scale fault-propagation folds in fold-and-thrust belts.     

Sustainability,corporate growers,regionalisation and Pacific‐Asia links in the Tasmanian and Hawkes Bay apple industries

This paper examines the differing modes of insertion of the Australian and New Zealand apple industries into world apple markets, part of the evolving global fresh fruit complex. It is argued that the mix and behaviours of key actors in the global apple industry are realigning market links and production systems. Industry actors in Australia and New Zealand are confronting issues of quality and sustainability as a result of pressures from consumers, regulatory measures in traditional and emerging markets, and new technologies of production and distribution. Governments are laying the foundations of national, regional and industry sustainability policies. An examination of the detailed structure and adjustments of the apple industry in Hawkes Bay and Tasmania reveals considerable differences in local responses, institutions and degree of restructuring of markets. The preferences and quality control requirements of export markets are increasingly important, to the extent that cultural dimensions appear to be altering the commodification process.     

How Effective Is Thermal Remediation of DNAPL Source Zones in Reducing Groundwater Concentrations?

Dense nonaqueous phase liquid (DNAPL) source areas containing chlorinated volatile organic compounds (cVOCs) such as trichloroethene (TCE) and perchloroethene (PCE) often give rise to significant dissolved plumes in groundwater, leading to the closure of downgradient water supply wells and creating vapor intrusion issues in buildings located above the plume. Hydraulic containment via pump‐and‐treat has often been implemented to limit migration but must continue indefinitely. Removal of the DNAPL source area by means such as in situ thermal remediation (ISTR) offers the potential to diminish or end the need for hydraulic containment if the associated dissolved plume attenuates sufficiently following source removal. A question often raised is whether this occurs or whether the back diffusion of contaminants from secondary sources such as low‐permeability lenses in the dissolved plume precludes it. The authors conducted DNAPL source removal using ISTR at dozens of sites. This paper presents a compilation of cases—10 separate DNAPL source areas at five project sites—where data indicate that the implementation of a thorough ISTR in a DNAPL source area can result in the attenuation of the associated dissolved plume, such that in several cases, long‐standing pump‐and‐treat systems could be turned off. Our findings contrast with recent assertions that aggressive source remediation may not be justifiable because dissolved plume concentrations will not decline sufficiently. We show that the application of ISTR can result in the thorough removal of the DNAPL source, effective diminution of dissolved plume groundwater concentrations, and achievement of drinking water standards.