The deep-water motion through the Lifamatola Passage and its contribution to the Indonesian throughflow

In order to estimate the contribution of cold Pacific deep water to the Indonesian throughflow (ITF) and the flushing of the deep Banda Sea, a current meter mooring has been deployed for nearly 3 years on the sill in the Lifamatola Passage as part of the International Nusantara Stratification and Transport (INSTANT) programme. The velocity, temperature, and salinity data, obtained from the mooring, reflect vigorous horizontal and vertical motion in the lowest 500 m over the ～2000 m deep sill, with speeds regularly surpassing 100 cm/s. The strong residual flow over the sill in the passage and internal, mainly diurnal, tides contribute to this bottom intensified motion. The average volume transport of the deep throughflow from the Maluku Sea to the Seram Sea below 1250 m is 2.5 Sv (1 Sv=10⁶ m³/s), with a transport-weighted mean temperature of 3.2 °C. This result considerably increases existing estimates of the inflow of the ITF into the Indonesian seas by about 25% and lowers the total mean inflow temperature of the ITF to below 13 °C. At shallower levels, between 1250 m and the sea surface, the flow is directed towards the Maluku Sea, north of the passage. The typical residual velocities in this layer are low (～3 cm/s), contributing to an estimated northward flow of 0.9–1.3 Sv. When more results from the INSTANT programme for the other Indonesian passages become available, a strongly improved estimate of the mass and heat budget of the ITF becomes feasible.     

Late Triassic sauropodomorph and Middle Jurassic theropod tracks from the Xichang Basin,Sichuan Province,southwestern China:First report of the ichnogenus Carmelopodus

Upper Triassic and Middle Jurassic strata of the Xichang Basin in Sichuan Province, southwestern China, yielded important dinosaur ichnofossils. From the Xujiahe Formation of the Yiguojiao tracksite, we report a Late Triassic footprint assemblage in China and the first discovery of diagnostic Triassic sauropodomorph tracks in this region. The tracks share a number of features in common with the ichnogenera Eosauropus(Late Triassic) and Liujianpus(Early Jurassic). The neighboring Bingtu tracksite is stratigraphically younger(Shaximiao Formation, Middle Jurassic) and preserves small tridactyl theropod tracks that represent the first occurrence of the ichnotaxon Carmelopodus in China and Asia. While these tracks are morphologically comparable to those from the Middle Jurassic type locality in North America, the specimens from China show the proximal margin of the digit IV impression in a more cranial position, which may indicate a trackmaker with a relatively short metatarsal IV. In addition to the skeletal record, the Carmelopodus footprints document the presence of small theropods in the dinosaur fauna of the Middle Jurassic Shaximiao Formation.     

Unusual dinosaur trackway preservation as clues to paleo-landscape and behavior from the Lower Cretaceous Luohe Formation,Shaanxi Province,China

Poorly preserved tracks have limited ichnotaxonomic or biotaxon utility,but may reveal useful information about the paleoenvironment,behavior and track taphonomy.Eight mostly parallel to sub parallel trackway segments(T1–T8)were registered on a truncation surface in the Lower Cretaceous Luohe Formation of Shaanxi Province.These attest to the passage of several bipeds,probably all theropods,in a paleo-contour-parallel,south-north direction in an arid setting.Quality of preservation in these trackways is poor,but notably superior in two additional trackways(T9–T10)on a foreset surface.Trackway T9 indicates a didactyl trackmaker,probably a deinonychosaurian,heading north to south.This is the 13th report of deinonychosaurian tracks from the Lower Cretaceous of China.If any or all the eight south-north oriented trackway segments represent continuations of other segments in the same trackways,the total number of individual trackmakers heading in this direction may have been as lowas three.Although the trackway pattern and sedimentological evidence could indicate a physically controlled pathway influencing the direction taken by these trackmakers,the possibility that the trackways also represented small social or gregarious group cannot be ruled out.     

Macroalgal diversity along the Baltic Sea salinity gradient challenges Remane's species-minimum concept

Remane’s species-minimum concept, which states that the lowest number of taxa occurs at the horohalinicum (5-8 psu), was tested by investigating macroalgal diversity on hard substrates along the natural salinity gradient in the Baltic Sea. Field data on species occurrence and abundance were collected by SCUBA diving along 10 transects of the Finnish, Swedish and German coasts, covering a salinity range from 3.9 to 27 psu. Macroalgal species numbers declined steadily with salinity, decreasing until 7.2 psu was reached, but in the horohalinicum, a marked reduction of species number and a change in diversity were indicated by the Shannon index and evenness values. The non-linear decrease in macroalgal diversity at 5-8 psu and the lack of increase in species numbers at salinities below 5 psu imply a restricted applicability of Remane’s species-minimum concept to macroalgae.     

Effects of metallic system components on marine electromagnetic loop data

Electromagnetic loop systems rely on the use of non-conductive materials near the sensor to minimize bias effects superimposed on measured data. For marine sensors, rigidity, compactness and ease of platform handling are essential. Thus, commonly a compromise between rigid, cost-effective and non-conductive materials (e.g. stainless steel versus fibreglass composites) needs to be found. For systems dedicated to controlled-source electromagnetic measurements, a spatial separation between critical system components and sensors may be feasible, whereas compact multi-sensor platforms, remotely operated vehicles and autonomous unmanned vehicles require the use of electrically conductive components near the sensor. While data analysis and geological interpretations benefit vastly from each added instrument and multidisciplinary approaches, this introduces a systematic and platform-immanent bias in the measured electromagnetic data. In this scope, we present two comparable case studies targeting loop-source electromagnetic applications in both time and frequency domains: the time-domain system trades the compact design for a clear separation of 15 m between an upper fibreglass frame, holding most critical titanium system components, and a lower frame with its coil and receivers. In case of the frequency-domain profiler, the compact and rigid design is achieved by a circular fibreglass platform, carrying the transmitting and receiving coils, as well as several titanium housings and instruments. In this study, we analyse and quantify the quasi-static influence of conductive objects on time- and frequency-domain coil systems by applying an analytically and experimentally verified 3D finite element model. Moreover, we present calibration and optimization procedures to minimize bias inherent in the measured data. The numerical experiments do not only show the significance of the bias on the inversion results, but also the efficiency of a system calibration against the analytically calculated response of a known environment. The remaining bias after calibration is a time/frequency-dependent function of seafloor conductivity, which doubles the commonly estimated noise floor from 1% to 2%, decreasing the sensitivity and resolution of the devices. By optimizing size and position of critical conductive system components (e.g. titanium housings) and/or modifying the transmitter/receiver geometry, we significantly reduce the effect of this residual bias on the inversion results as demonstrated by 3D modelling. These procedures motivate the opportunity to design dedicated, compact, low-bias platforms and provide a solution for autonomous and remotely steered designs by minimizing their effect on the sensitivity of the controlled-source electromagnetic sensor.     

X-ray Spectromicroscopy of Mineral Intergrowths in the Santa Catharina Meteorite

This work describes the application of microfocus X-ray absorption spectroscopy (XAS) and X-ray photo-emission electron microscopy (XPEEM) to the study of the complex mineralogical intergrowths within the Santa Catharina meteorite. The Santa Catharina meteorite of this study (BM52283 from the meteorite collection of the Natural History Museum, London, UK) primarily comprises a taenite bulk host phase (Fe:Ni ratio = 70.9 ± 0.8%:29.1 ± 0.8%) with a set of oxide-bearing cloudy zone textured regions (Fe:Ni:O ratio = 40.4 ± 0.3%:49.0 ± 0.7%:10.6 ± 0.8% at the core and Fe:Ni:O ratio = 34.4 ± 1.5%:42.7 ± 0.6%:22.9 ± 1.8% towards the rims) and numerous schreibersite (Fe:Ni:P ratio = 38.6 ± 1.6%:38.4 ± 0.9%:23.0 ± 0.5%) inclusions. Between the schreibersite and the taenite are rims up to 50 μm across of Ni-rich kamacite (Fe:Ni ratio = 93.4 ± 0.4%:6.6 ± 0.5%). No chemical zoning or spatial variations in the Fe and Ni speciation was observed within either the schreibersite or the kamacite phases. The oxide-bearing cloudy zone textured regions mostly comprise metallic Fe–Ni alloy, predominantly tetrataenite. Within the oxide phases, the Fe is predominantly, but not entirely, tetrahedrally co-ordinated Fe³⁺ and the Ni is octahedrally co-ordinated Ni²⁺. Structural analysis supports the suggestion that non-stoichiometric Fe₂NiO₄ trevorite is the oxide phase. The trevorite:tetrataenite ratio increases at the edges of the oxide-bearing cloudy zone textured regions indicating increased oxidation at the edges of these zones. The spatial resolution of the XPEEM achieved was between 110 and 150 nm, which precluded the study of either the previously reported ∼ 10 nm precipitates of tetrataenite within the bulk taenite or any antitaenite.     

Near-future changes in storm surges along the Atlantic Iberian coast

Natural Hazards - Decadal predictions bridge the gap between the short-term weather/seasonal forecasts and the long-term climate projections. They target the reproduction of large-scale weather...     

Solutions for 4D cadastre – with a case study on utility networks

The increasing complexity and flexibility of modern land use requires that cadastres need to manage information on the third and temporal (fourth) dimension. This article considers the registration of legal space of utility networks in cadastre in this 3D + time (=4D) context. A requirement analysis in three countries that have methods to register utility networks complying with their legal, organizational and technical structure (Turkey, the Netherlands and Queensland, Australia) is the basis for three alternatives for 4D cadastre to register utility networks. The three alternatives are analysed with respect to legal, organizational and technical cadastral requirements. This article presents a case study and a prototype from the Netherlands. In this country by law utilities are considered to be real estate objects with obligatory registration of ownership and geometry. This study shows that the 3D space and separate temporal attributes approach (state-based model) is a very promising solution to maintain temporal changes of utility networks and that this approach is to be preferred above the current practice, where the 3D and temporal aspects are not considered when registering a network.