Linking Tarim Basin sea retreat (west China) and Asian aridification in the late Eocene

The Tarim Basin in western China formed the easternmost margin of a shallow epicontinental sea that extended across Eurasia and was well connected to the western Tethys during the Paleogene. Climate modelling studies suggest that the westward retreat of this sea from Central Asia may have been as important as the Tibetan Plateau uplift in forcing aridification and monsoon intensification in the Asian continental interior due to the redistribution of the land‐sea thermal contrast. However, testing of this hypothesis is hindered by poor constraints on the timing and precise palaeogeographic dynamics of the retreat. Here, we present an improved integrated bio‐ and magnetostratigraphic chronological framework of the previously studied marine to continental transition in the southwest Tarim Basin along the Pamir and West Kunlun Shan, allowing us to better constrain its timing, cause and palaeoenvironmental impact. The sea retreat is assigned a latest Lutetian–earliest Bartonian age (ca. 41 Ma; correlation of the last marine sediments to calcareous nannofossil Zone CP14 and correlation of the first continental red beds to the base of magnetochron C18r). Higher up in the continental deposits, a major hiatus includes the Eocene–Oligocene transition (ca. 34 Ma). This suggests the Tarim Basin was hydrologically connected to the Tethyan marine Realm until at least the earliest Oligocene and had not yet been closed by uplift of the Pamir–Kunlun orogenic system. The westward sea retreat at ca. 41 Ma and the disconformity at the Eocene–Oligocene transition are both time‐equivalent with reported Asian aridification steps, suggesting that, consistent with climate modelling results, the sea acted as an important moisture source for the Asian continental interior.     

Midlittoral polychaete communities in the Eastern Mediterranean Sea: new information from the implementation of the Natural Geography in Shore Areas (NaGISA) protocol and comparisons at local and regional scales

The aim of this study was to attempt to fill current knowledge gaps on midlittoral Mediterranean biodiversity at local and regional scales, by using benthic polychaetes as a model taxon. Two different data sets were analysed: (i) a quantitative data set from the two Natural Geography in Shore Areas (NaGISA) study sites in Crete and (ii) a qualitative data set from multiple sites across the Mediterranean. At the local scale, the results provide evidence that (i) discrete species communities are formed in midlittoral Mediterranean habitats, which vary by geographical location and year, depending on the scale of observation; (ii) macrophyte coverage and Chl‐a are the only environmental variables associated, albeit weakly, with the above pattern; (iii) although naturally disturbed, the Cretan NaGISA sites do not seem to experience any anthropogenic stress; (iv) environmental heterogeneity and history seem to be much less important in shaping the polychaete communities than inter‐specific interactions; however, it is not possible to specify at this stage whether local or regional processes or even their interactions may shape the polychaete communities. At the regional scale, the results indicate that (i) the only factor that seems to be involved in the regional pattern is the identity of the study providing the data sets, which implies variability and bias in how research projects are carried out, from the sampling design through to data collection and analysis; (ii) the Cretan NaGISA sites may be considered as representative of the habitat in the Mediterranean, under certain conditions.     

Spatio‐temporal variation in density and size structure of the endangered sea cucumber Isostichopus fuscus in Huatulco National Park,Mexico

The brown sea cucumber Isostichopus fuscus (Ludwig, 1875) has been subjected to strong fishing pressure and is currently considered an endangered species by the IUCN Red List of Threatened Species. Spatial and temporal variations in density were analysed and population parameters of I. fuscus were estimated in three localities of the Southern Mexican Pacific. Density was estimated using circular transects covering a 300 m² area in each locality. Body length and weight were also measured. The mean density was 0.018 ± 0.013 individuals·m^?2, and was statistically significantly lower during summer. The mean length and weight were 22.4 ± 3.8 cm and 396 ± 130 g, respectively, and statistically significant differences were found among localities. The weight–length relationship was W = 0.28·L^1.32 and the mean relative condition index (Kn) = 1.04 ± 0.31. The von Bertalanffy growth equation was L_t = 38.7·(1–exp^(?0.4·t)). The lowest values of length, weight and age were found at Dos Hermanas, suggesting that this locality could be favorable for the settlement of larvae and recruitment and growth of juveniles. The present study is the second to estimate densities of I. fuscus and the first one to publish data on size structure and growth for the population at Bahias de Huatulco. The densities were so low in the three sampled localities that none of them would be able to support a fishery, even under a sustainable management scheme. The information collected in the present study could be helpful for management programs of the Huatulco National Park, as all the data used for these currently come mainly from the populations of I. fuscus in the Gulf of California.     

The influence of increased iron concentration on survival and growth of seedlings and young plants of eelgrass Zostera marina

Iron (Fe) is an essential nutrient for plants but toxic at high concentrations. We subjected seedlings and young plants of eelgrass Zostera marina to different seawater iron concentrations (500, 600, 700, 800, 1,000 and 1,500 μg/L) for 30 days under controlled laboratory conditions. Natural seawater without added iron (500 μg/L) was used as reference seawater. No sediments were provided to avoid iron scavenging by particle surfaces in the sediment. We measured plant response in terms of survivorship, morphology, growth rate and productivity. Survival analysis combined with morphological, dynamic and productive assessment suggested that the optimum seawater iron concentration for the establishment of Z. marina seedlings and young plants is 700 μg/L. The no observed effect concentration, lowest observed effect concentration, lethal concentration that caused an increase in mortality to 10% of that of the control, and the effect concentration that caused a decrease in growth to 10% of that of the control values of young plants were significantly lower than those of seedlings, implying an increased sensitivity to high Fe concentrations (>1,000 μg/L). This study further develops our understanding of the physiological ecology of the early life stages of Z. marina and provides data that could prove helpful in the development of successful eelgrass restoration and conservation.     

Environmental factors influencing aggregation of manta rays (Manta birostris) off the northeastern coast of the Yucatan Peninsula

Manta rays inhabit tropical, subtropical and temperate waters. Aggregation sites of manta rays have been recognized worldwide, but the reasons for this behavior are still poorly understood. This study describes environmental factors influencing aggregation sites of the giant manta ray (Manta birostris) off the northeastern coast of the Yucatan Peninsula. Observations of manta rays were obtained from scientific surveys conducted during 2006–2011. Environmental data were obtained from satellite imagery. The maximum entropy (Maxent) method for habitat modeling was used to determine the effects of environmental conditions on the species and predict suitable habitat for manta rays in this region. Primary productivity and distance to the coast were the most influential variables, suggesting that aggregation occurs in highly productive coastal waters. The distribution of manta rays predicted by the Maxent model showed that the most suitable habitat within the study area is located off the northeastern coast of the Yucatán Peninsula, more precisely, northeast of Isla Holbox and northwest of Isla Contoy. Seasonal patterns of distribution suggest that the most suitable conditions are present from July through September.     

Geotechnical characterization of slump scars,eroded slopes,and correlated deposits on continental margins: Gulf of Lions,Western Mediterranean sea

Abstract

Vertical variations of geotechnical properties in the uppermost sediment layers characterize the main sedimentary processes acting on the construction and destruction of progressive‐type continental slopes. In the Gulf of Lions, the original thicknesses and distribution of the uppermost sedimentary layers of the continental slope and rise, which consist of Holocene muds overlying Pleistocene muds, have been greatly modified by erosion and several kinds of slope failure processes. Each process is typified through sets of geotechnical properties measured in the eroded or slumped sections and in the associated sediment accumulations.

In slump scars, the water‐rich Holocene muds lie on fine, overconsolidated, Pleistocene muds with high plasticity and low shear strength. In bottom current‐eroded slopes, where modern sedimentation is extremely reduced, the Pleistocene muds frequently outcrop and may sometimes be overlain by a very thin layer of Holocene muds. The Pleistocene muds of eroded slopes are overconsolidated and more silty and less plastic than the Pleistocene muds from slopes affected by slope failure, their shear strength being 10 times greater.

Deposits at the toe of slumps are very often formed by several superposed three‐layer units (triplets of interstratified Holocene, transitional, and Pleistocene layers) issued from retrogressive slumping occurring in the slump scars above their head area. The main body of each layer is then relatively undisturbed, showing the usual burial geotechnical gradients due to overburden pressure (i.e., decrease of water content and increase of unit weight and shear strength). At the toe of bottom current‐eroded slopes, a thick and homogeneous layer of Holocene muds overlies the Pleistocene muds; this Holocene layer has unappreciable burial depth gradient of its geotechnical parameters because of a high rate of modem and continuous deposition.     

Behavior of soil plugs in open‐ended model piles driven into sands

Calibration chamber tests were conducted on open‐ended model piles driven into dried siliceous sands with different soil conditions in order to clarify the effect of soil conditions on load transfer mechanism in the soil plug. The model pile used in the test series was devised so that the bearing capacity of an open‐ended pile could be measured as three components: outside shaft resistance, plug resistance, and tip resistance. Under the assumption that the unit shaft resistance due to pile‐soil plug interaction varies linearly near the pile tip, the plug resistance was estimated. The plug capacity, which was defined as the plug resistance at ultimate condition, is mainly dependent on the ambient lateral pressure and relative density. The length of wedged plug that transfers the load decreases with the decrease of relative density, but it is independent of the ambient pressure and penetration depth. Under several assumptions, the value of earth pressure coefficient in the soil plug can be calculated. It gradually reduces with increase in the longitudinal distance from the pile tip. At the bottom of the soil plug, it tends to decrease with increase in the penetration depth and relative density, and to increase with the increase of ambient pressure. This may be attributed to (1) the decrease of friction angle as a result of increase in the effective vertical stress, (2) the difference in the dilation degree of the soil plug during driving with ambient pressures, and (3) the difference in compaction degree of soil plug during driving with relative densities. Based on the test results, an empirical equation was suggested to compute the earth pressure coefficient to be used in the calculation of plug capacity using one‐dimensional analysis, and it produces proper plug capacities for all soil conditions.     

Movement patterns of individual migrating western rock lobster,Panulirus cygnus,in Western Australia

Abstract

Migrating and pre‐migrating western rock lobster Panulirus cygnus were tagged with datastorage tags that recorded temperature and pressure, which was converted to depth (Pressure (kPa) — surface pressure (kPa)/10)) at Dongara and Jurien Bay in Western Australia between December 2005 and December 2007. All lobsters were fitted with tag flotation devices, and returns were made by either commercial fishers or beachcombers who located detached tags. A total of 135 lobsters were released with “backpack” flotation tags, but only 84 (62.2%) of the backpacks carried data‐storage tags. Depths of release ranged from 5 to 113 m. Of the tagged lobsters released, commercial fishers recaptured 52 (38.5%), whereas 11 tags (8.1%) were found by beachcombers. At least 33%, and possibly up to 63%, of animals identified by their pale coloration as pre‐migrating individuals, failed to migrate. Those that did migrate (n = 11) were at liberty from 1 to 94 days and showed generally similar movement patterns in that they migrated only at night from darkness (after 2000 h) until after moonrise. However, their movement patterns were less constrained by the rising of the moon in deep water. Only 27% migrated nightly, compared with 73% that skipped migrating on one or more nights, to restart some days later. This latter proportion would likely have been considerably greater, but some migrating animals were only at large for short periods before recapture, and therefore had little time to show any variation to the nocturnal migration pattern. Individual speeds of migration during periods of activity were estimated for nine lobsters as 0.20 to 0.68 km h^?1, with a mean speed of 0.44 km h^?1, or 7.4 m min^?1. Improved knowledge of daily movement patterns resulting from this study provides a potentially important input into technological improvements in bait and pot design.