Effects of fracture lineaments and in-situ rock stresses on groundwater flow in hard rocks: a case study from Sunnfjord, western Norway

Systematic field mapping of fracture lineaments observed on aerial photographs shows that almost all of these structures are positively correlated with zones of high macroscopic and mesoscopic fracture frequencies compared with the surroundings. The lineaments are subdivided into zones with different characteristics: (1) a central zone with fault rocks, high fracture frequency and connectivity but commonly with mineral sealed fractures, and (2) a damage zone divided into a proximal zone with a high fracture frequency of lineament parallel, non-mineralized and interconnected fractures, grading into a distal zone with lower fracture frequencies and which is transitional to the surrounding areas with general background fracturing. To examine the possible relations between lineament architecture and in-situ rock stress on groundwater flow, the geological fieldwork was followed up by in-situ stress measurements and test boreholes at selected sites. Geophysical well logging added valuable information about fracture distribution and fracture flow at depths. Based on the studies of in-situ stresses as well as the lineaments and associated fracture systems presented above, two working hypotheses for groundwater flow were formulated: (i) In areas with a general background fracturing and in the distal zone of lineaments, groundwater flow will mainly occur along fractures parallel with the largest in-situ rock stress, unless fractures are critically loaded or reactivated as shear fractures at angles around 30° to σ_H; (ii) In the influence area of lineaments, the largest potential for groundwater abstraction is in the proximal zone, where there is a high fracture frequency and connectivity with negligible fracture fillings. The testing of the two hypotheses does not give a clear and unequivocal answer in support of the two assumptions about groundwater flow in the study area. But most of the observed data are in agreement with the predictions from the models, and can be explained by the action of the present stress field on pre-existing fractures.     

A dynamic network model for two‐phase immiscible flow

A dynamic pore‐scale network model is formulated for two‐phase immiscible flow. Interfaces are tracked through the pore throats using a modified Poiseuille equation, whereas special displacement rules are used at the pore bodies. The model allows interfaces to move over several pore‐lengths within a time step. Initial computational results are presented for a drainage experiment to demonstrate some of the features of the model. This revised version was published online in July 2006 with corrections to the Cover Date.     

卑尔根气候模式中大西洋热盐环流年代际与年际变率的气候影响

利用一个全球海气耦合模式--卑尔根气候模式的积分结果,揭示了与大西洋热盐环流(THC)年代际和年际振荡相对应的气候异常型.年代际振荡发生在全海盆尺度,伴有亚速尔高压的增强、冰岛低压的加深;年际振荡发生在局地尺度,伴有亚速尔高压的减弱.这两种海平面气压异常型都反映了北大西洋涛动(NAO)活动中心的强度变化,两种变率型对应的拉布拉多海对流活动都加剧.但伴随局地尺度的THC调整,伊尔明格海的对流活动减弱.蒸发异常对拉布拉多海表层盐度异常的影响较为显著.分析表明,局地尺度的THC振荡主要是对大气强迫的被动响应,而海盆尺度THC振荡的实质是反映整个输送带的强度变化,其气候意义要大于THC的局地振荡.     

The BEAM-project: prediction and assessment of mixture toxicities in the aquatic environment

Freshwater and marine ecosystems are exposed to various multi-component mixtures of pollutants. Nevertheless, most ecotoxicological research and chemicals regulation focus on hazard and exposure assessment of individual substances only, the problem of chemical mixtures in the environment is ignored to a large extent. In contrast, the assessment of combination effects has a long tradition in pharmacology, where mixtures of chemicals are specifically designed to develop new products, e.g. human and veterinary drugs or agricultural and non-agricultural pesticides. In this area, two concepts are frequently used and are thought to describe fundamental relationships between single substance and mixture effects: Independent Action (Response Addition) and Concentration Addition. The question, to what extent these concepts may also be applied in an ecotoxicological and regulatory context may be considered a research topic of major importance, as the concepts would allow to make use of already existing single substance toxicity data for the predictive assessment of mixture toxicities. Two critical knowledge gaps are identified: (a) There is a lack of environmental realism, as a huge part of our current knowledge about the applicability of the concepts is restricted to artificial situations with respect to mixture composition or biological effect assessment. (b) The knowledge on what exactly is needed for using the concepts as tools for the predictive mixture toxicity assessment is insufficient. Both gaps seriously hamper the necessary, scientifically sound consideration of mixture toxicities in a regulatory context.In this paper, the two concepts will be briefly introduced, the necessity of considering the toxicities of chemical mixtures in the environment will be demonstrated and the applicability of Independent Action and Concentration Addition as tools for the prediction and assessment of mixture toxicities will be discussed. An overview of the specific aims and approaches of the BEAM project to fill in the identified knowledge gaps is given and first results are outlined.     

Distinct petrographic responses to basin reorganization across the Triassic–Jurassic boundary in the southwestern Barents Sea

A general shift towards higher mineralogical and textural maturity changes the reservoir character across the Triassic–Jurassic transition in the southwestern Barents Sea basin (SWBSB), largely affecting the hydrocarbon prospectivity in the region. Petrographic and geochronological provenance data presented in this paper suggest that the shift from mineralogically immature to mature sandstones initiated during the deposition of the Norian–Rhaetian Fruholmen Formation, and varies with basin location. Strong contrasts between the Fruholmen Formation and underlying formations are associated with proximity to the rejuvenated Caledonian and Fennoscandian hinterlands and are mainly restricted to the southern basin margins. In the basin interior, subtle petrographic variations between the Fruholmen Formation and older Triassic sandstones reflect a distal position relative to the southern hinterland. The long-lived misconception of a regional compositional contrast in the Arctic at the turn of the Norian can be attributed to higher sampling frequency associated with hydrocarbon exploration activity along the southern basin margins, and masking by increased annual precipitation and subsequent reworking during the Jurassic. Geothermal signatures and rearrangement of ferric clay material across the Carnian–Norian transition support a recycled origin for the Fruholmen Formation in the basin interior. As the closest tectonically active region at the time, the Novaya Zemlya fold-and-thrust belt represents the best provenance candidate for polycyclic components in Norian–Rhaetian strata. In addition to recycling in the hinterland during the Late Triassic, local erosion of exposed intrabasinal highs and platforms at the Triassic–Jurassic transition represents a second process where thermodynamically unstable mineral components originally sourced from the Uralides may be removed. Textural and mineralogical modification may also have occurred in marginal-marine depositional environments during periods with elevated sea level. Mature sediment supply from the rejuvenated hinterland in the south, multiple cycles of reworking and gradual accumulation of polycyclic grains have likely led to the extreme compositional maturity registered in the Tubåen, Nordmela and Stø formations in the SWBSB. It is likely that increased annual precipitation since the latest Carnian had an amplifying effect on sandstone maturation across the Triassic–Jurassic boundary, but we consider the effect to be inferior compared to provenance shifts and reworking. Findings from this study are important for understanding compositional and textural maturity enhancement processes in siliciclastic sedimentary basins.     

The formation and structure of cleantech clusters: Insights from San Diego,Dublin, and Graz

ABSTRACT

In recent years cleantech (clean technology) clusters have emerged in many industrialized regions. Cleantech clusters are heralded as a key solution in the transformation toward a greener economy, with the potential to foster regional economic growth while simultaneously mitigating environmental challenges. Despite witnessing a growing tendency for cleantech activities to be organized in clusters, the research literature remains rather vague on what cleantech clusters are and how they emerge. The author therefore explores these questions with the use of empirical data from three internationally recognized cleantech clusters: (1) Cleantech San Diego, in Southern California, USA, (2) Green Tech Valley, located in the province of Styria, Austria, and (3) Sustainable Nation Ireland, located in the Dublin region, Ireland. The data and information used in the article were derived from empirical accounts sourced from existing literature, secondary data sources, on-site observations, and face-to-face interviews carried out between October 2015 and June 2016. The findings show that the cleantech clusters can be perceived as knowledge, innovation, and collaboration clusters that span industrial and institutional boundaries. The formation of the cleantech clusters is largely the outcome of strategic leadership on the one hand, and place-specific conditions and local capabilities on the other hand.     

The role of eddies on pathways,transports, and entrainment in dense water flows along a slope

Ocean Dynamics - The flow of dense water along slopes has been investigated in several numerical investigations based on the Dynamics of Overflow Mixing and Entrainment (DOME) setup. In the present...     

Effects of the bottom boundary condition in numerical investigations of dense water cascading on a slope

The flow of dense water along continental slopes is considered. There is a large literature on the topic based on observations and laboratory experiments. In addition, there are many analytical and numerical studies of dense water flows. In particular, there is a sequence of numerical investigations using the dynamics of overflow mixing and entrainment (DOME) setup. In these papers, the sensitivity of the solutions to numerical parameters such as grid size and numerical viscosity coefficients and to the choices of methods and models is investigated. In earlier DOME studies, three different bottom boundary conditions and a range of vertical grid sizes are applied. In other parts of the literature on numerical studies of oceanic gravity currents, there are statements that appear to contradict choices made on bottom boundary conditions in some of the DOME papers. In the present study, we therefore address the effects of the bottom boundary condition and vertical resolution in numerical investigations of dense water cascading on a slope. The main finding of the present paper is that it is feasible to capture the bottom Ekman layer dynamics adequately and cost efficiently by using a terrain-following model system using a quadratic drag law with a drag coefficient computed to give near-bottom velocity profiles in agreement with the logarithmic law of the wall. Many studies of dense water flows are performed with a quadratic bottom drag law and a constant drag coefficient. It is shown that when using this bottom boundary condition, Ekman drainage will not be adequately represented. In other studies of gravity flow, a no-slip bottom boundary condition is applied. With no-slip and a very fine resolution near the seabed, the solutions are essentially equal to the solutions obtained with a quadratic drag law and a drag coefficient computed to produce velocity profiles matching the logarithmic law of the wall. However, with coarser resolution near the seabed, there may be a substantial artificial blocking effect when using no-slip.     

The effect of diapycnal mixing on the ventilation and CFC-11 uptake in the Southern Ocean

1. Introduction Ocean General Circulation Models (OGCMs) arekey tools in the assessment of the future ocean up-take of atmospheric greenhouse gases and heat. Fur-thermore, whereas nature experiences one realisationof the climate state, climate models can be used as alaboratory to produce a multitude of climate realisa-tions, and by that contribute to the understanding ofthe variability and stability properties of the system.It is, in this respect, crucial to evaluate the climatemodels ag…