Fault damage zone origin of the Teufelsmauer, Subhercynian Cretaceous Basin, Germany

Recognition of fractures as porosity-reducing deformation bands pervading all sandstone segments of the Teufelsmauer, Subhercynian Creatceous Basin, Germany, motivates a study relating the observed macroscopic and microscopic deformation to the damage zone of the nearby Harz border fault. Deformation bands, confirmed and documented by several porosity-reducing micro-mechanisms, such as cataclasis, particulate flow, pressure solution and a heavy quartz cementation, were mapped and analyzed in terms of the kinematics and deformation intensities expressed by them. Deformation band kinematics are uniform throughout the entire basin and consistent with the large-scale tectonic structures of the area. A strain intensity study highlights two narrow but long zones of deformation bands, sub-parallel to the Harz border fault. Deformation band kinematics, strain intensity, as well as micro-mechanisms are all consistent with a continuous but internally diverse deformation band damage zone of the entire Teufelsmauer structure along the Harz border fault, bringing new insights into the tectonic evolution and the origin of the heavy quartz cementation of the sandstones in the Subhercynian Cretaceous Basin.     

Scouring the surface: Ejecta dynamics and the LCROSS impact event

The Lunar CRater Observation and Sensing Satellite mission (LCROSS) impacted the moon in a permanently shadowed region of Cabeus crater on October 9th 2009, excavating material rich in water ice and volatiles. The thermal and spatial evolution of LCROSS ejecta is essential to interpretation of regolith properties and sources of released volatiles. The unique conditions of the impact, however, made analysis of the data based on canonical ejecta models impossible. Here we present the results of a series of impact experiments performed at the NASA Ames Vertical Gun Range designed to explore the LCROSS event using both high-speed cameras and LCROSS flight backup instruments. The LCROSS impact created a two-component ejecta plume: the usual inverted lampshade “low-angle” curtain, and a high speed, high-angle component. These separate components excavated to different depths in the regolith. Extrapolations from experiments match the visible data and the light curves in the spectrometers. The hollow geometry of the Centaur led to the formation of the high-angle plume, as was evident in the LCROSS visible and infrared measurements of the ejecta. Subsequent ballistic return of the sunlight-warmed ejecta curtain could scour the surface out to many crater radii, possibly liberating loosely bonded surface volatiles (e.g., H₂). Thermal imaging reveals a complex, heterogeneous distribution of heated material after crater formation that is present but unresolved in LCROSS data. This material could potentially serve as an additional source of energy for volatile release.     

Eemian landscape response to climatic shifts and evidence for northerly Neanderthal occupation at a palaeolake margin in northern Germany

The prevailing view suggests that the Eemian interglacial on the European Plain was characterized by largely negligible geomorphic activity beyond the coastal areas. However, systematic geomorphological studies are sparse. Here we present a detailed reconstruction of Eemian to Early Weichselian landscape evolution in the vicinity of a small fingerlake on the northern margin of the Salzwedel Palaeolake in Lower Saxony (Germany). We apply a combination of seismics, sediment coring, pollen analysis and luminescence dating on a complex sequence of colluvial, paludal and lacustrine sediments. Results suggest two pronounced phases of geomorphic activity, directly before the onset and at the end of the Eemian period, with an intermediate period of pronounced landscape stability. The dynamic phases were largely driven by incomplete vegetation cover, but likely accentuated by fluvial incision in the neighbouring Elbe Valley. Furthermore, we discovered Neanderthal occupation at the lakeshore during Eemian pollen zone (PZ) E IV, which is chronologically in line with other known Eemian sites of central Europe. Our highly-resolved spatio-temporal data substantially contribute to the understanding of climate-induced geomorphic processes throughout and directly after the last interglacial period. It helps unraveling the landscape dynamics between the coastal areas to the north and the loess belt to the south.     

Tracking cohorts: Analysis of migration in the early life stages of an estuarine fish

Larvae and juveniles are often most abundant at some distance from where spawning occurs. Such apparent distribution shifts can be the result of larval migration, seasonal shifts in the distribution of spawners, or spatial heterogeneity in mortality. In the present study, a cohort-based method was adopted to test for larval migration of bay anchovy (Anchoa mitchilli) and to estimate its rate and timing. A spatially and temporally extensive series of ichthyoplankton samples was collected in the lowest 122 km of the Hudson River in summer 1998. Bay anchovy eggs and young-of-year individuals were abundant (mean density=1.6 m^?3 and 0.95 m^?3, respectively). Daily age used to define cohort membership was determined from otoliths. Age and length were strongly related (R²=0.74). The age-length relationship varied over the season such that early-season bay anchovy hatched in June grew more rapidly than later-season anchovy hatched in August. Cohorts were defined as week-long birth-data classes, and net migration patterns of 11 cohorts were analyzed. Mean location shifted upriver as cohorts increased in age to 6 wk, at a net rate of about 0.6 km d^?1. Cohort abundance usually decreased over time in downriver regions, but usually increased in upriver regions. The cohort analysis confirmed that the upriver shift in distribution of early-stage anchovy is not entirely due to changes in adult spawning behavior or to clines in larval mortality, and must be partly the result of larval migration.     

Geophysical investigation of buried Pleistocene subglacial valleys in Northern Germany

Buried Pleistocene subglacial valleys are extensively used as groundwater reservoirs by waterworks in northern Germany, although little is known about the locations and size of these valleys and the internal structure of the sediment fill. This lack of knowledge about important groundwater reservoirs is a challenge for geophysics.This paper summarizes the geophysical investigation of two buried Pleistocene subglacial valleys in northern Germany—the Ellerbeker Rinne and the Bremerhaven–Cuxhavener Rinne—including seismic, gravity, and airborne electromagnetic (AEM) surveys. Seismic sections show the detailed structure of the paleovalleys. The reliability of interpretation is enhanced by vertical seismic profiles in wells. The maximum depths of the Ellerbeker Rinne and the Bremerhaven–Cuxhavener Rinne were found to be 360 and about 400 m, respectively. Gravity survey revealed Bouguer anomalies above the sediment fill of both buried valleys. The Ellerbeker Rinne produces a negative residual anomaly of −0.5 mGal, whereas the sediments of the Bremerhaven–Cuxhavener Rinne produce a positive anomaly. The latter one is superimposed by negative gravity anomalies due to near-surface structures. The Bremerhaven–Cuxhavener Rinne can be mapped by airborne electromagnetics at locations without saltwater intrusion, which would affect the measurements. The electrical conductivity of the clay layer at the top of the valley fill differs significantly from that of the surrounding sand. The combined use of these three geophysical methods, which measure different physical parameters, leads to a better understanding of the subsurface geology and the hydrogeology of the Pleistocene subglacial valleys.     

Modeling of Plume Capture by Continuous, Low-Permeability Barriers

Modeling was performed to simulate ground water flow through reactive barriers of lower hydraulic conductivity than the surrounding aquifer to determine the plume capture widths. As a plume approaches such a barrier, it spreads laterally. Therefore, to intercept an entire plume, the barrier must be wider than the upgradient width of the undisturbed plume. The results indicate that, for practical values of barrier thickness and plume width, hydraulic conductivities ten-fold less than that of the aquifer can be accommodated by making the width of the barrier approximately 20% greater than the upgradient width of the plume. Barrier hydraulic conductivities one-hundred-fold less than that of the aquifer may require barrier widths up to twice the width of the upgradient plume for plumes 100 feet wide (33 m) and as little as 1.1 times for plumes 1000 feet wide (325 m). The results presented here lend support to the view that novel emplacement methods that create zones of slightly lower hydraulic conductivity than the native aquifer may be viable alternatives to the excavation-and-backfill approaches which have thus far been used for installing permeable reactive barriers.     

Fe,Ti ordering and octahedral distortions in acentric neptunite: Temperature dependent X-ray and neutron structure refinements and Mössbauer spectroscopy

Single-crystal X-ray and neutron structure refinements carried out on neptunite (KNa₂Li(Fe, Mg, Mn)₂Ti₂Si₈O₂₄) from San Benito, California at various temperatures (neutrons: 15 K and 293 K; X-rays: 110 K, 293 K and 493 K) indicate that this mineral crystallizes in the acentric space group Cc (T=293K: a=16.427 Å, b=12.478 Å, c=9.975 Å, = 115.56°, Z=4, V=1844.53 ų) due to ordering of octahedrally coordinated metals (Ti, Fe, Mn, Mg). In the neptunite structure, Ti and (Fe, Mn, Mg) octahedra share edges to form chains that run along [110] and [110]. These chains are, in turn, linked through shared corners along [001]. The resulting octahedral framework is interwoven by a similar [Si₈O₂₂] tetrahedral framework. Li, Na and K occupy 6-, 8- and 10- coordinated sites within the framework. The metal-containing polyhedra show strong distortions at all temperatures. In particular, Ti exhibits a strong off-center displacement (0.25 Å) within its octahedron, leading to four Ti-O distances of 2.0 Å, one of 2.2 Å and one of 1.7 Å. The displaced Ti position is in good agreement with a position that minimizes differences between ionic bond strengths and is interpreted as an energy minimum in an ionic potential model. Mössbauer spectra collected at 77 K, 293 K and 400 K indicate all Fe to be present as octahedral Fe²⁺. Although two distinct Fe positions were found in the structure, 77 K and 293 K spectra display only one quadrupole doublet. Two Fe sites can only be resolved in the 400 K spectrum. It is suggested that the temperature dependence of octahedral edge distortions is responsible for the separation of the Mössbauer doublets.