The Cabo Frio upwelling overrides geographical patterns in the population dynamics of the shrimp Artemesia longinaris Spence Bate, 1888 (Decapoda: Penaeidae)

Upwelling areas are among the most productive ecosystems on the planet, influencing the biology of marine organisms. This study investigated the population dynamics of the shrimp Artemesia longinaris in two regions in southeastern Brazil, one inside (Macaé—Rio de Janeiro State) and one outside (Ubatuba—State of São Paulo) the Cabo Frio upwelling area. The aim was to verify the influence of the upwelling phenomenon on the abundance, growth, longevity, size of sexual maturity, and reproductive period of the species. In total, 188,902 individuals were captured at Macaé and 3,461 at Ubatuba. Individuals captured at Macaé showed larger maximum size, higher longevity, and slower growth rate, besides reaching sexual maturity at larger sizes than at Ubatuba. Continuous reproduction was observed in both regions, with juvenile recruitment peaks in spring and summer. Local conditions observed at Macaé were influenced by the Cabo Frio upwelling zone, characterized by productive and cooler waters that are around 20°C during most of the year. The upwelling phenomenon is probably the main factor influencing the population parameters studied here, changing the geographic patterns previously observed for the variation of these parameters in A. longinaris.     

冲绳海槽轴线地质特征

冲绳海槽位于东海大陆架与琉球岛弧之间，海槽中发育着一系列平行轴向延伸的地堑型正断层。穿越海槽的地震剖面证实了海槽扩张中心的存在，扩张轴沿海槽轴线方向延伸。由于地堑构造中心的扩张速率较大，由某引起的海槽中心下陷的速率大于沉积作用的补偿速率，使海槽中心海底出现明显的下陷。在轴线的大陆坡一侧，陆源沉积占绝对优势；轴线的岛坡一侧，以火山坡碎屑、浮岩、有孔虫软泥为沉积特征。     

Limpets as prey: Lipophrys pholis choice for size

Patellid limpets are key species on rocky shores, structuring intertidal assemblages through their grazing. Their role as prey for fish is, however, often overlooked in studies of intertidal ecosystem functioning. The shanny Lipophrys pholis is a common predator of limpets on rocky shores in Northern Europe and, in this study, we examined the characteristics of its predation on limpets based on prey size. The limpet size range that adult L. pholis (10–12.5 cm) can eat was examined in the laboratory using Patella depressa in 0.2 cm classes, varying between 0.5 cm and 3.0 cm in maximum shell length. There was a limpet size refuge above 1.8 cm, while all smaller sizes were readily consumed by the shanny. The predator attacking behaviour was also examined and found to vary with prey size. Limpets up to 0.8 cm were crushed by the jaw‐constricting force and eaten whole, whereas larger prey were prised from the substratum and the body subsequently separated from the shell. To examine whether there was a L. pholis preference for P. depressa size, a two‐stage laboratory experiment was done using two size classes defined as small (0.7–0.8 cm maximum shell length) and large (1.5–1.6 cm maximum shell length). In the first stage, the predator was given each limpet size class separately. In the second stage, the fish was given a choice between the two classes. Lipophrys pholis was shown to have a preference for the large size class (1.5–1.6 cm). The average number of limpets consumed by the shanny was examined for the duration of one high‐tide typical of the central region of Portugal (≈ 4 h). On average, approximately five limpets (up to an eight limpet maximum) were consumed. The present study shows that L. pholis has a feeding preference based on limpet size, which suggests that the limpet population structure and intra‐ and inter‐specific interactions may be influenced by the shanny predation.     

Distribution patterns of interstitial polychaetes in sandy beaches of southern Brazil

This study describes the distribution patterns of interstitial polychaetes along morphodynamic gradients on six exposed sandy beaches in Santa Catarina and Paraná (South Brazil). Three random transects were sampled at two points on each beach, one at the swash and another at the surf zone, in winter and summer conditions. Six sediment replicates were collected at each sampling point using a corer of 4.6 cm internal diameter that removed 10 cm into the sediment. Abundance and composition of interstitial polychaete were correlated to wave height, slope, grain size, CaCO₃, chlorophyll a , omega indexes, temperature and relative tide range using a canonical correspondence analysis (CCA). A factorial ANOVA showed that taxa richness, mean density and Shannon's diversity were significantly higher at the reflective beaches, but average values differ significantly between transects and these differences change according to the beach zones on both sampling dates. PERMANOVA showed that polychaete associations differ among transects according to the beach zones. The composition of interstitial polychaete associations was significantly correlated to beach morphodynamics and features (P < 0.01). Polychaete associations of reflective beaches were more diverse than in other morphodynamic states. Intermediate beaches may also sustain diverse associations due to temporal variability of the morphodynamic patterns. Beaches presenting extreme dissipative morphodynamics and compacted sediments appear to be unfavourable for the occurrence of interstitial polychaetes.     

Study on Flow Field Around Vertical Breakwater Under Different Overtopping Conditions Based on Numerical Simulation

A numerical wave flume is constructed based on the Reynolds Averaged Navier-Stokes (RANS) equations with turbulence closure by a modified k-ε model to study the viscous interactions of waves with vertical breakwaters for different overtopping cases. The governing equations,the turbulence model,boundary conditions,and solution method for the numerical wave flume are introduced briefly. The reliability of the numerical wave flume is examined by comparing the numerical results with the experimental measurement...     

Long‐term final void salinity prediction for a post‐mining landscape in the Hunter Valley,New South Wales,Australia

Opencast mining alters surface and subsurface hydrology of a landscape both during and post‐mining. At mine closure, following opencast mining in mines with low overburden to coal ratios, a void is left in the final landform. This final void is the location of the active mine pit at closure. Voids are generally not infilled within the mines' lifetime, because of the prohibitive cost of earthwork operations, and they become post‐mining water bodies or pit lakes. Water quality is a significant issue for pit lakes. Groundwater within coal seams and associated rocks can be saline, depending on the nature of the strata and groundwater circulation patterns. This groundwater may be preferentially drawn to and collected in the final void. Surface runoff to the void will not only collect salts from rainfall and atmospheric fallout, but also from the ground surface and the weathering of fresh rock. As the void water level rises, its evaporative surface area increases, concentrating salts that are held in solution. This paper presents a study of the long term, water quality trends in a post‐mining final void in the Hunter Valley, New South Wales, Australia. This process is complex and occurs long term, and modelling offers the only method of evaluating water quality. Using available geochemical, climate and hydrogeological data as inputs into a mass‐balance model, water quality in the final void was found to increase rapidly in salinity through time (2452 to 8909 mg l⁻¹ over 500 years) as evaporation concentrates the salt in the void and regional groundwater containing high loads of salt continues to flow into the void. Copyright © 2004 John Wiley & Sons, Ltd.     

Observations of mine seismicity in the eastern Wasatch Plateau,Utah, U.S.A.: A possible case of implosional failure

In the summer of 1984, a three-dimensional, high-resolution microearthquake network was operated in the vicinity of two coal mines beneath Gentry Mountain in the eastern Wasatch Plateau, Utah. During a six-week period, approximately 3,000 seismic events were observed of which the majority were impulsive, higher frequency (>10 Hz), short duration (<2–3 sec) events probably associated with the caving of the roof from a longwall operation. In contrast, 234 of the largest located events appeared to occur predominantlybeneath the mines to a depth of 2 to 3 km consistent with previous studies. The magnitudes of these events ranged from less thanM _c 0 to 1.6. In addition to the unusual depths of these latter events, an anomalous aspect displayed by the events was an apparent dilatational focal mechanism suggesting a non-double-couple, possibly implosional source. Implosional events have been observed in other studies of mine seismicity; however, the generally inadequate instrumental coverage of the focal sphere has cast some doubt on the validity of such mechanisms. Previously suggested source mechanisms for such implosional events have included tensional failure through strata collapse, and a shear-implosional displacement mechanism. Shear failure must be involved in the failure process of the Gentry Mountain implosional events as evidenced by well-defined shear waves in the observed seismograms. Simultaneous monitoring in the East Mountain coal mining area to the south by the University of Utah revealed typical shear failure events mixed with implosional events. The observed double-couple, reverse focal mechanisms at East Mountain were similar to mechanisms determined in previous studies and a composite focal mechanism determined in this study for a sequence outside the mining areas. This suggested that the shear events within the mining areas are being influenced by the regional tectonic stress field. Thus in addition to the seismic events associated with caving of the roof from the longwall operation, there appear to be at least two other types of mining-induced seismic events occurring in the eastern Wasatch Plateau, both submine in origin: (1) events characterized by apparent non-double-couple possibly implosional focal mechanisms and well-defined shear waves; and (2) shear events, which are indistinguishable from tectonic earthquakes and may be considered mining triggered earthquakes. The small mining-induced stress changes that occur beyond a few hundred meters from the mine workings suggest both types of seismic events are occurring on critically stressed, pre-existing zones of weakness. Topography, overburden, method of mining, and mine configuration also appear to be significant factors influencing the occurrence of the implosional submine events.     

The rank evaluation of South Brazilian Gondwana coals on the basis of different chemical and physical parameters

Rank evaluation of South Brazilian Gondwana coals according to the American (American Society for Testing and Materials, ASTM) and German (Deutsche Industrie Normen, DIN) standard specifications or on the basis of Alpern's Universal Classification has too often led to conflicting results.When any attempt is made to determine the rank of Brazilian coals by using methods established for the Northern Hemisphere coals, two sorts of difficulties arise: namely, (1) the reflectence measurements do not indicate the real degree of coalification of the organic matter because of the liptinitic impregnations of the vitrinites, and (2) random reflectance values (R_ran, moisture, volatile-matter and carbon contents as well as the calorific value do not correlate when plotted on the ASTM and DIN classification schemes.In addition, when rank determinations are carried out by using fluorescence measurements and geochemical analyses the results are at variance in relation to those determined by the conventional chemical and physical parameters.It is suggested that the rank evaluation of South Brazilian coals is far more meaningful if carried out by reflectance measurements on vitrinites along with fluorescence measurements on sporinites, alginites and coal extracts.