Flüssige Phasen im migmatitisehen Lauterbrunner-Kristallin (Aarmassiv,Alpen)

During boudinage of competent, amphibolitic layers in the Lauterbrunner Crystalline Complex a pegmatitic liquid phase filled the cross-fractures and other areas of reduced pressure (“hetero-kinetic” spaces according toSander, 1950, p. 306) between the boudins. The mobile components were derived from the adjacent incompetent rocks as well as the apatite rich boudins. The habit of the stubby apatite within the amphibolitic boudins is markedly different from the slender apatite needles which grew in the pegmatitic liquid between the boudins. Various authors, on the basis of microscopic observations and experimental work, propose that acicular apatite crystals cannot be used as a criterion for crystallization from a high temperature magmatic phase. Investigations in the Lauterbrunner Crystalline Complex suggest that acicular apatites have grown in a low temperature liquid phase.     

Progressive aqueous alteration of CM carbonaceous chondrites

CM chondrites are aqueously altered rocks that contain ∼9 wt% H₂O⁺ (i.e., indigenous water) bound in phyllosilicates; also present are clumps of serpentine-tochilinite intergrowths (previously called “poorly characterized phases” or PCP), pentlandite and Ni-bearing pyrrhotite. We studied 11 CM chondrites that span the known range from least altered to most altered. We used various petrologic properties (many previously identified) that provide information regarding the degree of aqueous alteration. There are no known unaltered or slightly altered CM chondrites (e.g., rocks containing numerous chondrules with primary igneous glass). Some CM properties result from processes associated with early and intermediate stages of the alteration sequence (i.e., hydration of matrix, alteration of chondrule glass, and production of large PCP clumps). Other petrologic properties reflect processes active throughout the alteration sequence; these include oxidation of metallic Fe-Ni, alteration of chondrule phenocrysts, changes in PCP composition (reflecting an increase in the phyllosilicate/sulfide ratio), and changes in carbonate mineralogy (reflecting the development of dolomite and complex carbonates at the expense of Ca carbonate).On the basis of these parameters, we propose a numerical alteration sequence for CM chondrites. Because there are no known CM samples that display only incipient alteration, the least altered sample was arbitrarily assigned to subtype 2.6. The most altered CM chondrites, currently classified CM1, are assigned to subtype 2.0. These highly altered rocks have essentially no mafic silicates; they contain chondrule pseudomorphs composed mainly of phyllosilicate. However, their bulk compositions are CM-like, and they are closer in texture to other C2 chondrites than to CI1 chondrites (which lack chondrule pseudomorphs). Using several diagnostic criteria, we assigned petrologic subtypes (±0.1) to every CM chondrite in our study: QUE 97990, CM2.6; Murchison, CM2.5; Kivesvaara, CM2.5; Murray, CM2.4/2.5; Y 791198, CM2.4; QUE 99355, CM2.3; Nogoya, CM2.2; Cold Bokkeveld, CM2.2; QUE 93005, CM2.1; LAP 02277, CM2.0; MET 01070, CM2.0.The proposed CM numerical alteration sequence improves upon the existing scheme of Browning et al. (1996) in that it does not require a complicated algorithm applied to electron-microprobe data to determine the average matrix phyllosilicate composition. The new sequence is more comprehensive and employs petrologic subtypes that are easier to use and remember than mineralogic alteration index values.New neutron-activation analyses of QUE 97990, QUE 93005, MET 01070, Murchison and Crescent, together with literature data, confirm the compositional uniformity of the CM group; different degrees of alteration among CM chondrites do not lead to resolvable bulk compositional differences. This suggests that the textural differences among individual CM chondrites reflect progressive alteration of similar hypothetical CM3.0 starting materials in different regions of the same parent body, with minimal aqueous transport of materials over appreciable (e.g., meters) distances.     

Channelized and hillslope sediment transport and the geomorphology of mountain belts

This paper uses the results of landscape evolution models and morphometric data from the Andes of northern Peru and the eastern Swiss Alps to illustrate how the ratio between sediment transport on hillslopes and in channels influences landscape and channel network morphologies and dynamics. The headwaters of fluvial- and debris-flow-dominated systems (channelized processes) are characterized by rough, high-relief, highly incised surfaces which contain a dense and hence a closely spaced channel network. Also, these systems tend to respond rapidly to modifications in external forcing (e.g., rock uplift and/or precipitation). This is the case because the high channel density results in a high bulk diffusivity. In contrast, headwaters where landsliding is an important sediment source are characterized by a low channel density and by rather straight and unstable channels. In addition, the topographies are generally smooth. The low channel density then results in a relatively low bulk diffusivity. As a consequence, response times are greater in headwaters of landslide-dominated systems than in highly dissected drainages. The Peruvian and Swiss case studies show how regional differences in climate and the litho-tectonic architecture potentially exert contrasting controls on the relative importance of channelized versus hillslope processes and thus on the overall geomorphometry. Specifically, the Peruvian example illustrates to what extent the storminess of climate has influenced production and transport of sediment on hillslopes and in channels, and how these differences are seen in the morphometry of the landscape. The Swiss example shows how the bedding orientation of the bedrock drives channelized and hillslope processes to contrasting extents, and how these differences are mirrored in the landscape. An erratum to this article can be found at     

Mechanical and microseismic characteristics of sandstones subject to moderate low-frequency differential cyclic loading (DCL) followed by monotonic loading up to failure

Acta Geotechnica - This work aims to experimentally investigate the behaviour of sandstone drilled from an underground coal mine exposed to low-frequency cyclic loading with distinct...     

European Surface Pressure Patterns for Months with Outstanding Climatic Anomalies During the Sixteenth Century

Monthly mean surface pressure patterns in the European area are reconstructed for those winter and summer seasons of the 16th century with outstanding climatic anomalies being either widespread over Europe or remarkably intensive in some European regions. From the available documentary information about weather characteristics and their sequences, it proved possible to infer prevalent processes of lower tropospheric advection of typical air masses and to assess the position and strength of major surface pressure centres on a monthly scale. For comparison with modern pressure patterns, monthly mean sea level pressure (SLP) grids from the 20th century have been selected for seasons with similar climatic anomalies. There are broad coincidences between these pressure patterns of the 16th and the 20th centuries except for cold summer seasons. Finally, results from the 16th century are discussed in terms of circulation dynamics (different phases of the North Atlantic Oscillation (NAO) in winter, decreasing frequency of anticyclonic ridging in summer).     

Flood Events in the Rhine Basin: Genesis,Influences and Mitigation

The paper analyses the hydrological regime of the Rhine catchment,the genesis of recent floods,and recommends some research and practical activities to mitigate flood damage. The catchment of the Rhine River can be divided into four main subcatchments: the alpine region with the Aare River as its main tributary and downstream the lower mountain regions of the tributaries Neckar, Main and Moselle. These four basins generate very different hydrographs. Due to the geographical conditions, the average discharge maximums shift from summer to winter downstream the Rhine. Moreover, the spatial and temporalprecipitation patterns of each river have a strong influence on the individual flood events. Some recent extraordinary floods are used to illustrate the parameters that have influenced these events.A strong relationship between recent climate change observationsand the occurrence of flood levels cannot be proven. However, the consequences of human interventions and the resulting changes to the river system (the Rhine and its tributaries) for the hydrograph can be quantified precisely.The influences of different land-use and climatic scenarios on flood conditions in the Rhine basin have not yet been separately identified. Thus, the Dutch-German project LAHoR was established. The primary aim of this project is to giveadvice for the ``Action Plan on Flood Defence' of the International Commission for the Protection of the Rhine (IKSR). In this plan a multidisciplinary approach to mitigating floods is suggested.It is anticipated that the plan willgenerate synergistic effects between flood prevention, water management, regional planning, agriculture, forestry and ecological demands.     

Palynology of Triassic–Jurassic boundary sections in northern Switzerland

A first palynostratigraphic scheme of Upper Triassic deposits in northern Switzerland was established based on spore-pollen associations and dinoflagellate cyst records from the upper part of the Upper Triassic Klettgau Formation and the lower part of the Lower Jurassic Staffelegg Formation. Drill cores from the Adlerberg region (Basel Tabular Jura) and from Weiach (northern part of Canton Zurich) as well as from an outcrop at the Chilchzimmersattel (Basel Folded Jura) were studied and five informal palynological associations are distinguished. These palynological associations correlate with palynological association of the Central European Epicontinental Basin and the Tethyan realm and provide a stratigraphic framework for the uppermost Triassic sediments in northern Switzerland. Throughout the uppermost Triassic to Jurassic palynological succession a remarkable prominence of Classopollis spp. is observed. Besides Classopollis spp. the three Rhaetian palynological associations A to C from the Upper Triassic Belchen Member include typical Rhaetian spore-pollen and dinoflagellate taxa (e.g., Rhaetipollis germanicus, Geopollis zwolinskae, Rhaetogonyaulax rhaetica, and Dapcodinium priscum). Association B differs from association A in a higher relative abundance of the sporomorph taxa Perinopollenites spp. and the consistent occurrence of Granuloperculatipollis rudis and Ricciisporites tuberculatus. Spore diversity is highest in the late Rhaetian palynological association C and includes Polypodiisporites polymicroforatus. A Rhaetian age for the Belchen Member is confirmed by palynological associations A–C, but there is no record of the latest Rhaetian and the earliest Jurassic. In contrast to the Rhaetian palynological associations the Early Jurassic associations W and D include Pinuspollenites spp., Trachysporites fuscus (in association W), and Ischyosporites variegatus. In the view of the end-Triassic mass extinction and contemporaneous environmental changes the described palynofloral succession represents the pre-extinction phase (associations A and B) including a distinct transgression, the extinction phase (association C) associated with a regression, and the post-extinction phase (association W).     

Thermal analysis in the laser-heated diamond anvil cell

A new technique actively controls thermal radiation and monitors sample properties during laser-heating in a diamond anvil cell. The technique can be described as a qualitative application of thermal analysis. Discontinuities in temperature, laser power, visible thermal radiation, or in their derivatives as functions of time can be associated with the enthalpy of phase transitions (such as melting) or with changes in maternal properties (such as emissivity).The technique is illustrated with melting experiments on iron-magnesium-silicate perovskite. Temperature corrections associated with these experiments are discussed and the results are briefly reviewed.