Determination of sand dune characteristics through geomorphometry and wind data analysis in central Iran (Kashan Erg)

The combination of wind measurements and remotely sensed geomorphometry indices provides a valuable resource in the study of desert landforms, because arduous desert environments are difficult to access. In this research, we couple wind data and geomorphometry to separate and classify different sand dunes in Kashan Erg in central Iran. Additionally, the effect of sand-fixing projects on sand dune morphology was assessed using geomorphometry indices (roughness, curvature, surface area, dune spacing and dune height). Results showed that a Digital Elevation Model of the National Cartographic Center of Iran (NCC DEM) with 10-m resolution and accuracy of 54% could discriminate geomorphometry parameters better than the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data with 30-m resolution and Shuttle Radar Topography Mission (SRTM) data with 90-m resolution and 45.2 and 1.6% accuracy, respectively. Low classification of SRTM DEM was associated with too many non-value points found in the DEM. Accuracy assessment of comparison ground control points revealed that ASTER DEM (RMSE = 4.25) has higher accuracy than SRTM and NCC DEMs in this region. Study of curvature showed that transverse and linear sand dunes were formed in concave topography rather than convex. Reduced slopes in fixed sand dunes were established due to wind erosion control projects. Measurements of dune height and spacing show that there is significant correlation in compound dunes (R ² = 0.546), linear dunes (R ² = 0.228) and fixed dunes (R ² = 0.129). In general, the height of dunes in Kashan Erg increases from the margin of the field to the center of the field with a maximum height of 120 m in star dunes. Analysis of wind data showed that sand drift potential is in low-medium class in Kashan Erg. Linear sand dunes in Kashan Erg show that they are following a global trend in forming of these. Finally, established of geomorphometry method in dune classification will help researchers to identify priority of land management and performance assessment of sand dunes fixing projects in arid arduous environment.     

Geochemistry and Genesis of Iron-apatite Ore in the Khanlogh Deposit, Eastern Cenozoic Quchan-Sabzevar Magmatic Arc, NE Iran

The Khanlogh deposit in the Cenozoic Quchan-Sabzevar magmatic belt, NE Iran, is hosted by Oligocene granodioritic rock. The Khanlogh intrusive body is I-type granitoid of the calc-alkaline series. The orebodies are vein, veinlet, massive, and breccia in shape and occur along the fault zones and fractures within the host rock. Ore minerals dominantly comprise magnetite and apatite associated with epidote, clinopyroxene, calcite, quartz, and chlorite. Apatites of the Khanlogh deposit have a high concentration of REE, and show a strong LREE/HREE ratio with a pronounced negative Eu anomaly. Magnetites have a high concentration of REE and show weak to moderate LREE/HREE fractionation. They are comparable to the REE patterns in Kiruna-type iron ores and show an affinity to calc-alkaline magmas. The Khanlogh deposit is similar in the aspects of host rock lithology, alteration, mineralogy, and mineral chemistry to the Kiruna-type deposits. Field observations, hydrothermal alteration halos, style of mineralization, and the geochemical characteristics of apatite, magnetite, and host rock indicate that these magnetite veins have hydrothermal origin similar to Cenozoic Kiruna-type deposits within the Tarom subzone, NW Iran, and are not related to silica-iron oxide immiscibility, as are the major Precambrian magnetite deposits in central Iran.     

A harmonic approach to global ocean tide analysis based on TOPEX/Poseidon satellite

The constant and harmonic parts of the global ocean tide are modeled by up to nine major tidal constituents, namely, S2, M2, N2, K1, P1, O1, Mf, Mm, and Ssa. Our computations start with the Fourier sine and cosine series expansion for the tidal constituents, including the constant Mean Sea Level (MSL). Although the frequencies of the tidal constituents are considered known, the coefficients of the sine and cosine functions are assumed to be unknown. Subsequently, the coefficients of the sine and cosine functions, as well as the constant part of the Fourier expansion, were expanded into spherical harmonics up to degree and order n, where n corresponds to the number of linearly independent spherical harmonic base functions needed to model the tidal constituents, determined via independent columns of the Gram matrix. The unknown coefficients of the spherical harmonic expansions are computed using sea level observations within cycles #1–#350 of the TOPEX/Poseidon satellite altimetry over 11 years of its mission. A set of orthonormal base functions was generated for the marine areas covered by TOPEX/Poseidon observations from the spherical harmonics using a Gram-Schmidt orthogonalization process. These were used for modeling the dominant tidal constituents. The computed models based on orthonormal base functions for the nine tidal constituents and the constant part of the Fourier expansion, were tested numerically for their validity and accuracy, proving centimeter accuracy.     

World-views of Arab Geographers

This paper describes the fundamental attitudes toward nature, land, and human existence which characterize Koranic teachings. Created by God of Heavens and Earth, Land is a substratum of life and resource for human welfare, subject to Divine Will and the fulfillment of human vocations through belief and right action. No land is the eternal or unequivocal possession of any group and the abuse or destruction of the land is due to pride and arrogance which leads to violence, oppression, and the division of mankind between Greeks and barbarians. Arab geography, while drawing on pre-Islamic sources and constantly adapting to new environments and challenges, was a unified science incorporating astronomy, geology, botanics, metallurgy, ethnology, mathematics and metaphysics. Travel accounts provided empirical foundations for mathematical, commercial, economic, and maritime geography, the Portolan charts and other maps providing guides for Spanish and Portuguese sailors and the geographical discoveries of European explorers.     

Spinels,Fe–Ti oxide minerals,apatites, and carbonates hosted in the ophiolites of Eastern Desert of Egypt: mineralogy and chemical aspects

Spinels, Fe–Ti oxide minerals, apatites, and carbonates hosted in ophiolitic serpentinites and metagabbros of Gabal Garf (southern ED) and Wadi Hammariya (central ED) of Egypt are discussed. Microscopic and electron probe studies on these minerals are made to evaluate their textural and compositional variations. Alteration of chromites led to form ferritchromite and magnetite; rutile–magnetite intergrowths and martite are common in serpentinites. Fine trillis exsolution of ilmenite–magnetite and ilmenite–hematite and intergrowth of rutile–magnetite and ilmenite–sphene are recorded. Composite intergrowth grains of titanomagnetite–ilmenite trellis lamellae are common in metagabbros. The formation of ilmenite trellis and lamellae in magnetite and titanomagnetite indicate an oxidation process due to excess of oxygen contained in titanomagnetite; trapped and external oxidizing agents. This indicates the high P _H2O and oxygen fugacity of the parental magma. The sulfides minerals include pyrrhotite, pyrite and chalcopyrite. Based on the chemical characteristics, the Fe–Ti oxide from the ophiolitic metagabbros in both areas corresponds to ilmenite. The patites from the metagabbros are identified as fluor-apatite. Carbonates are represented by dolomites in serpentinites and calcite in metagabbros. Spinel crystals in serpentinites are homogenous or zoned with unaltered cores of Al-spinel to ferritchromit and Cr-magnetite toward the altered rims. Compared to cores, the metamorphic rims are enriched in Cr# (0.87–1.00 vs. 0.83–0.86 for rims and cores, respectively) and impoverished in Mg# (0.26–0.48 vs. 0.56–0.67) due to Mg–Fe and Al (Cr)–Fe³⁺ exchange with the surrounding silicates during regional metamorphism rather than serpentinization process. The Fe–Ti oxides have been formed under temperature of ~800 °C for ilmenite. Al-spinels equilibrated below 500–550 °C, while the altered spinel rims correspond to metamorphism around 500–600 °C. Geochemical evidence of the podiform Al-spinels suggest a greenschist up to lower amphibolite facies metamorphism (at 500–600 °C), which is isofacial with the host rocks. Al-spinel cores do not appear to have re-equilibrated completely with the metamorphic spinel rims and surrounding silicates, suggesting relic magmatic composition unaffected by metamorphism. The composition of Al-spinel grains suggest an ophiolitic origin and derivation by crystallization of boninitic magma that belonging to a supra-subduction setting could form either in forearcs during an incipient stage of subduction initiation or in back-arc basins.     

Integration of remote sensing data with the field and laboratory investigation for lithological mapping of granitic phases: Kadabora pluton, Eastern Desert, Egypt

In the current study, an integration of Enhanced Thematic Mapper Plus (ETM+), field, and laboratory data have been used for lithological mapping of different granitic phases in the Kadabora area, Eastern Desert, Egypt. Application of enhancement techniques, including a new proposed band ratio combination (ratio 5/3, 3/1, 7/5 in RGB, respectively) and supervised classification images are used in discriminating different granitic phases in the Kadabora pluton from each other and from their environs. The data have been proved with the help of field and geochemical investigations. The results revealed that: (1) the Kadabora granitic pluton could be distinguished into three phases that recognized by field and laboratory investigation including granodiorite (phase I), monzogranite (phase II), and syeno-alkali feldspar granite (phase III). These phases are arranged according to their relative ages while the country rocks include ophiolitic mélange and metagabbro–diorite complex. It is also confirmed that the granitic pluton is invaded by dyke swarms which is trending in N–S direction. Geochemically, results show that the granodiorite is calc-alkaline, I-type and formed under subduction tectonic regime. Monzogranite falls within the alkaline and highly fractionated calc-alkaline granites, whereas syeno-alkali feldspar granite extends into proper alkaline granitoids field. Monzogranite and syeno-alkali feldspar granite belong to the A₂-subtype granite. This A₂-subtype granite was probably formed in an extensional regime, subsequent to subduction which can lead to tensional break-up of the crust (i.e., post-collisional, post-orogenic granites). The monzogranite and the syeno-alkali feldspar granite were probably formed by partial melting of relatively anhydrous lower crust source and/or tonalite to granodiorite is viable alternative to the granulite source.     

Distribution and Influence of Iron Phases on the Physico—Chemical Properties of Phyllosilicates

Clay minerals from different Cretaceous stratigraphic successions of Egypt were investigated using XRD,DTA,dissolution analysis(DCB),IR,Moessbauer and X-band Electron Spin Resonance(ESR) spectroscopies.The purity of the samples and the degree of structural order were determined by XRD.The location of Fe in the octahedral sheet is characterized by absorption bands at-875cm^-1 assigned as Al-OH-Fe which is present after chemical dissolution of free iron.The Moessbauer spectra of these clays sow two doublets with isomer shift and quadrupole splitting typical of octahedral coordinated Fe^3 ,in addition to third doubler with hyperfine parameter typical of Fe^2 in the spectra of Abu-Had kaolinite (H)sample.6-lines magnetic hyperfine components which are consistent with those of hematite are confirmed in the spectra of both Isel and Rish kaolinite samples.Goethite was confirmed by both IR and DTA.Multiple nature of ESR of these clays suggested structural Fe in distorted octaedral symmetry and as non-structural Fe.Little dispersion and low swelling indices as well as incomplete activaiton of investigated montmorillonite samples by NaCO3 appear to be due to incomplete disaggregation of montmorillonite particles.This can be explained by the ability of Fe-gel to aggregate the montmorillonite into pseudo-particles and retard the rigid-gel structure.However,extraction of this ferric amorphous compound by dithonite treatment recovers the surface properties of the montmorillonite samples.On the other hand,amounts and site occupation of Fe associated with kaolinite samples show a negative correlation with the parameters used to describe the degree of crystalline perfection,color,brightness and vitrification range of these kaolinite samples.     

Incorporation of silica into the goethite structure: a microscopic and spectroscopic study

Quartz and iron (hydr)oxide are reactive surface phases that are often associated with one another in soils and sediments. Despite the several studies on the coating of quartz with iron oxides, the reactivity of dissolved species (Si) leached from quartz with iron (hydr)oxides has received limited attention. In this study, goethite synthesized on quartz substrates were characterized using field emission scanning electron microscopy, X-ray diffraction (XRD), transmission electron microscopy, and Fourier-transform infrared (FT-IR) spectroscopy. The SEM characterization revealed that bundles of thin parallel aligned goethite rods were formed at pH?>?10, while large pseudohexagonal crystals of twinned goethite needles were synthesized at pH?≤?10 after dehydration and hydration in the alkaline media. TEM analysis showed expanded and distorted lattice spacing of the crystal structure of iron (hydr)oxide due to silica incorporation. The characterization showed that silica increased the crystallite size of the goethite and transformed its acicular texture to a larger, twinned needle structure. FT-IR and XRD analyses revealed band shifts in crystal bonds as well as new bond formations, which indicate the presence of changes in the chemical environment of Fe–O and Si–O bonds. Thus, the presence of sorbed silicates modifies the crystal and lattice structure of goethite.     

A kinematic hardening based model for unsaturated soils considering different hydraulic conditions

At present, several of the existing elastoplastic constitutive models are adapted for describing the stress–strain behavior of unsaturated soils. However, most of them present certain limitations in this field. These limitations can be related to the basic model and/or added unsaturated state variables and formulations. In this regard, inability to model the hydro‐mechanical behavior in constant water (CW) conditions is an example of these limitations. In this paper, an advanced version of CJS model is selected for adaptation to the unsaturated states. Adaptation to unsaturated states is achieved in the framework of effective stress approach. Effective stress equation and unsaturated state variables are selected based on the recent research existing in the literature. The developed model is capable of describing the complex behavior of unsaturated soil in the CW condition in addition to predicting the behavior at failure and post–failure, nonlinear elastoplastic behavior at low levels of stress and strain (by selecting a very small elastic domain), as well as wetting and collapse behaviors. In order to validate the model, results of triaxial tests in CD and CW conditions are used. The validation results indicate the good capability of the proposed model. Behavior of the unsaturated soils during wetting is an important issue. For this reason, the model is also evaluated based on the results of wetting and collapse triaxial tests. A comparison between the tests and simulation results shows that the model is able to predict the soil behavior under the wetting path. Copyright © 2016 John Wiley & Sons, Ltd.