Regional estimation of base recharge to ground water using water balance and a base-flow index

Naturally occurring long-term mean annual base recharge to ground water in Nebraska was estimated with the help of a water-balance approach and an objective automated technique for base-flow separation involving minimal parameter-optimization requirements. Base recharge is equal to total recharge minus the amount of evapotranspiration coming directly from ground water. The estimation of evapotranspiration in the water-balance equation avoids the need to specify a contributing drainage area for ground water, which in certain cases may be considerably different from the drainage area for surface runoff. Evapotranspiration was calculated by the WREVAP model at the Solar and Meteorological Surface Observation Network (SAMSON) sites. Long-term mean annual base recharge was derived by determining the product of estimated long-term mean annual runoff (the difference between precipitation and evapotranspiration) and the base-flow index (BFI). The BFI was calculated from discharge data obtained from the U.S. Geological Survey's gauging stations in Nebraska. Mapping was achieved by using geographic information systems (GIS) and geostatistics. This approach is best suited for regional-scale applications. It does not require complex hydrogeologic modeling nor detailed knowledge of soil characteristics, vegetation cover, or land-use practices. Long-term mean annual base recharge rates in excess of 110 mm/year resulted in the extreme eastern part of Nebraska. The western portion of the state expressed rates of only 15 to 20 mm annually, while the Sandhills region of north-central Nebraska was estimated to receive twice as much base recharge (40 to 50 mm/year) as areas south of it.     

Soil moisture: a residual problem underlying AGCMs

This paper critically reviews and intercompares land surface schemes (LSSs) as used in atmospheric general circulation models (AGCMs) to simulate soil moisture and its response to a warmer climate, and potential evapotranspiration approaches as used in operational soil moisture monitoring and in predicting the response of soil moisture to a warmer climate. AGCM predictions of overall soil moisture change are in broad agreement but disagree sharply in some regions. Intercomparison projects have sought to evaluate the LSSs used by AGCMs for both accuracy and consistency. These studies have found that different LSSs can produce very different simulations even when supplied with identical atmospheric forcing. As well, LSSs that produce similar surface results from present-day or control climates often diverge when forced with climatic change data. Furthermore, no single LSS has been identified that produces an adequate simulation of all of temperature, moisture, evapotranspiration and runoff. AGCM LSSs must resolve the surface energy balance (SEB) in order to compute realistic heat fluxes between with the atmospheric model. LSSs have been used with AGCMs in both on-line (fully coupled) and off-line modes. In off-line climatic change experiments, AGCM predictions of atmospheric temperature and precipitation have been used, along with model downward radiative fluxes at the surface, to drive their own uncoupled LSS. However, there are simple non-energy-balance methods for estimating evapotranspiration that have been traditionally used in agricultural and meteorological applications. These schemes compute a potential evapotranspiration (PE) based on temperature and/or net radiation inputs, with the PE modified based on the availability of soil moisture. Operational PE approaches have also been used with AGCM data in off-line climate change experiments. The advantages of this approach are that it is simpler and requires less information, although (like the off-line SEB approach) it leaves out the simulation of feedbacks between the surface and the atmosphere.Although the SEB approach is essential for LSSs that must be coupled to AGCMs, this does not necessarily make it superior to an off-line operational PE LSS when it comes to quantities such as soil moisture. The quality of current observational data is insufficient to demonstrate that either approach is better than the other. Both approaches should continue to be used and intercompared when predicting the impacts of climatic change on soil moisture.     

Cl,N, C isotopic analysis of common agro-chemicals for identifying non-point source agricultural contaminants

The isotopic compositions of commercially available herbicides were analyzed to determine their respective ¹⁵N, ¹³C and ³⁷Cl signatures for the purposes of developing a discrete tool for tracing and identifying non-point source contaminants in agricultural watersheds. Findings demonstrate that of the agrochemicals evaluated, chlorine stable isotopes signatures range between δ³⁷Cl = −4.55‰ and +3.40‰, whereas most naturally occurring chlorine stable isotopes signatures, including those of road salt, sewage sludge and fertilizers, vary in a narrow range about the Standard Mean Ocean Chloride (SMOC) between −2.00‰ and +1.00‰. Nitrogen stable isotope values varied widely from δ¹⁵N = −10.86‰ to +1.44‰ and carbon stable isotope analysis gave an observed range between δ¹³C = −37.13‰ and −21.35‰ for the entire suite of agro-chemicals analyzed. When nitrogen, carbon and chlorine stable isotope analyses were compared in a cross-correlation analysis, statistically independent isotopic signatures exist suggesting a new potential tracer tool for identifying herbicides in the environment.     

On the mechanical interaction between a growing porphyroblast and its surrounding matrix

Whether or not a growing porphyroblast can displace its surrounding matrix is an important but contentious issue affecting the interpretation of metamorphic textures. As an alternative to treating the problem in terms of force of crystallization, this paper examines the mechanics of porphyroblast-matrix interaction using a different and much simpler conceptual framework. New microstructural evidence for matrix displacement is then presented and analysed in detail. This evidence, from a hornfelsed metagreywacke, consists of dome-shaped accumulations of muscovite and graphite, each dome being attached to (and concave towards) a rhombdodecahedral face of a garnet porphyroblast. Muscovite within the domes shows a dimensional preferred orientation subparallel to the dome outlines while, in the matrix away from the domes, there is no preferred orientation.Our model for the origin of the mica domes envisages muscovite and graphite being swept ahead of, and mechanically accumulated onto, the growing garnet faces as they advance through the matrix. Rigorous testing of this model provides strong evidential support for matrix displacement by growing porphyroblasts. A new analysis is provided of the conditions under which matrix grains are included or displaced by porphyroblasts. It is concluded that matrix grain displacement may be very common, although the special combination of circumstances necessary to produce a diagnostic microstructural pattern probably occurs very rarely.     

Dating of post-glacial landforms in the central howgills

Little is known of Holocene landform development in Upland Britain. This paper describes a site at Middle Langdale in the Howgill Fells of Cumbria where large, but now stabilized and inactive gullies cut through periglacial material. At the base of the gullies large debris cones have buried earlier alluvial sediments on the valley floor. On these sediments and buried by the debris cones is a well-developed organic soil from which two ¹⁴C dates have been obtained in an attempt to estimate the age range of the soil. These dates range from 2580±55 years BP for the fine particulate fraction from the base of the organic horizon to 940±95 years BP for fossil rootlets from the uppermost organic layer, immediately below the overlying debris cones. The pollen evidence suggests that the valley floor site was initially dominated by alder carr and later by a Juncus marsh with birch, alder and hazel nearby. The pollen, from the surrounding upland area suggests woodland on the valley sides, dominated by oak and elm that was later replaced by a more open environment rich in heath species and in which disturbed ground species were present. The magnetic evidence indicates a stable local environment during soil formation but shows a sudden inwash of unweathered debris at the top of the buried soil. The evidence suggests that the valley floor was geomorphologically stable throughout the period of soil formation, although there was a local change in valley floor vegetation and a reduction of woodland cover on the valley sides at sometime during the period. The evidence then points to major geomorphological changes; a wave of soil erosion, gully development and debris cone deposition, perhaps following the Scandinavian introduction of sheep farming in the tenth century A.D.     

Uptake of radioactivity by marine sediments and implications for monitoring metal pollutants

The value of studying artificially-produced radionuclides in the marine environment is discussed in the wider context of monitoring sediments for other metal pollutants. Differences in the dispersion of selected radionuclides discharged from the same known source are used to illustrate the sort of changes in phase or speciation which must occur with other metal pollutants, but which cannot be demonstrated directly because of the multiplicity of sources. Various chemical and physical procedures are discussed which can be applied to a study of heavy metal associations with marine sediments, as are questions such as the existence, or otherwise, of mechanisms for the slow release of adsorbed material from the buried sediment back into the water column. Suggestions are made as to how radionuclide studies may be helpful in answering questions such as these, which are considered to be vital for the meaningful interpretation of sediment analyses.     

A study of the Rima Sirsalis lunar magnetic anomaly

The source of the lunar magnetic anomaly associated with the Rima Sirsalis linear rille has been modelled using the vector field intensities due to arbitrary uniform magnetization in a rectangular prism. It is shown that in order to match the Apollo 16 subsatellite data, the lunar surface near the rille must have a vertical magnetization of 6–9 × 10⁻³ G if the anomaly is due to flux leakage from a gap in the crust with the dimensions of the rille. This is more than one order of magnitude larger than the magnetization of any lunar sample, but is comparable with the high magnetization recently deduced for the Reiner γ formation in Oceanus Procellarum. An alternative explanation is that Rima Sirsalis and its surroundings are the site of a vertical magnetization contrast of 10⁻⁵ – 10⁻⁴ G which is at least as wide as the rille and extends to a depth of tens of kilometers in the crust. A wider magnetic source reduces the required magnetization (or depth) proportionately, since to first order the field at high altitude is proportional to the magnetic dipole moment per unit length.     

Stranded tar on Florida beaches: September 1979–October 1980

Amounts of tar stranded on Florida beaches were determined periodically over one year (September 1979–October 1980). Results show that tar fouling of southeast Florida beaches is an order of magnitude greater than the rest of the state. This may result from the extensive ship traffic in the Straits of Florida. There is no evidence that any Florida beaches received increased amounts of tar as a result of the 1979 Ixtoc-1 blowout in the southern Bay of Campeche. There is also no evidence that the amounts of tar on southeast Florida beaches have increased over amounts measured in API studies conducted in 1958 and 1971.     

Incrustations and fumarolic condensates at kilauea volcano, Hawaii: field, drill-hole and laboratory observations

Hawaiian volcanoes characteristically have but few of the many types of minerals found in incrustations of other volcanic areas. In Hawaii sulfates resulting from air oxidation of volatiles predominate, and fluorides produced during rock alteration by fumarolic gases are prominent. Halides are generally found where reducing conditions exist in fumaroles and lava lake drill holes. The most common mineral types are sulfur, opaline silica, gypsum, ralstonite, and thenardite. Minerals from the same deposit are found to vary markedly in the content of the less abundant components. Condensates from vapor issuing from fumaroles show little quantitative relationship in component content to incrustations deposited at the same fumaroles. It is believed that an energetically favorable isomorphic substitution of some elements in the crystal lattice of a depositing mineral may lead to the build-up of a high concentration of an element from a lean vapor. Equilibrium calculations applied to condensate studies give a good quantitative approximation to the concentrations of the elements found in natural systems, but when applied to incrustations they serve only to indicate general compositional relations. Laboratory studies have shown the important role of chlorides in metal transfer in the gas phase in high-temperature aqueous systems, but only in the absence of oxygen. These studies also demonstrated the important role of HF in rock alteration and in the transfer of silica.