Tsunami deposit associated with the 2011 Tohoku‐oki tsunami in the Hasunuma site of the Kujukuri coastal plain,Japan

We describe the detailed sedimentary characteristics of a tsunami deposit associated with the 2011 Tohoku‐oki tsunami in Hasunuma, a site on the Kujukuri coastal plain, Japan. The thick tsunami deposit was limited to within 350 m from the coastline whereas the inundation area extended about 1 km from the coastline. The tsunami deposit was sampled by excavation at 29 locations along three transects and studied using peels, soft‐X imaging and grain‐size analysis. The deposit covers the pre‐existing soil and reached a maximum measured thickness of 35 cm. It consists mainly of well‐sorted medium to fine sand. On the basis of sedimentary structures and changes in grain size, we divided the tsunami deposit into several sedimentary units, which may correspond to multiple inundation flows. The numbers of units and their sedimentary features vary among the three transects, despite the similar topography. This variation implies a considerable influence of local effects such as elevation, vegetation, microtopography, and distance from footpaths, on the tsunami‐related sedimentation.     

Taxonomy and biogenicity of Archaean spheroidal microfossils (ca. 3.0 Ga) from the Mount Goldsworthy–Mount Grant area in the northeastern Pilbara Craton, Western Australia

Microstructures recently reported from an Archaean sedimentary succession (ca. 3.0 Ga) in the Mount Goldsworthy–Mount Grant area in the northeastern Pilbara Craton meet the criteria for compelling evidence of biogenicity [Sugitani, K., Grey, K., Allwood, A., Nagaoka, T., Mimura, K., Minami, M., Marshall, C.P., Van Kranendonk, M.J., Walter, M.R., 2007. Diverse microstructures from Archaean chert from the Mount Goldsworthy–Mount Grant area, Pilbara Craton, Western Australia: microfossils, dubiofossil, or pseudofossils. Precambrian Res. 158, 228–262]. The structures are morphologically diverse. Although they were tentatively classified into five major morphological types (thread-like, film-like, small (<15 μm) and large (>15 μm) spheroidal, and spindle-like), the possible taxonomic significance of these groups was not discussed. Building on our earlier analysis, we focus on the morphology of the larger spheroids, as well as presenting further evidence relating spindles and several bizarre forms, and attempt to group them taxonomically and adduce additional evidence for their biogenicity.Taphonomic features were identified in each of the various morphological groups, but the range of morphological diversity of the spheroids cannot be attributed solely to taphonomic alteration. Four subdivisions of spheroids are proposed: (1) simple single-walled spheroids, (2) thin-walled spheroids having a diffuse envelope, (3) thick-walled spheroids, and (4) spheroids having an extensively folded wall. Simple single-walled spheroids, 15–60 μm in diameter, with various wall textures but commonly lacking envelopes or appendages form the dominant subgroup. Other complex morphologies are present and include aligned or associated bodies of thin-walled spheroids with diffuse envelopes, and spindle-like structures containing inner spheroidal bodies. The degree of morphological complexity and associations between structures suggest the presence of reproductive phases. If correct, this implies that the early Earth (ca. 3.0 Ga) showed a higher level of biodiversity than is currently postulated.     

Adsorption of tributyltin by tributyltin resistant marine Pseudoalteromonas sp. cells

The isolate, Pesudoalteromonas sp. TBT1, could grow to overcome the toxicity of tributyltin chloride (TBTCl) up to 30 microM in the absence of Cl(-) in the medium until the cells reached an exponential phase of growth. The viability, however, was reduced after the cells reached a stationary phase. The degradation products, such as dibutyltin (DBT) and monobutyltin (MBT), were not detected in the growth medium, indicating that the isolate has no ability to degrade TBT into less toxic DBT and MBT. Up to about 10(7.5) TBT molecules were adsorbed by a single cell. The observation of morphological changes with an electron microscope showed that the cell surface became wrinkled after exposure to the lethal concentration of 10 mM TBTCl. These results indicate that the resistance of the isolate toward the toxicity of TBTCl is not related to the unique cell surface, which seems to play an important role in preventing the diffusion of TBTCl into the cytoplasm.     

Adsorption of tributyltin by tributyltin resistant marine Pseudoalteromonas sp. cells

The isolate, Pesudoalteromonas sp. TBT1, could grow to overcome the toxicity of tributyltin chloride (TBTCl) up to 30 μM in the absence of Cl⁻ in the medium until the cells reached an exponential phase of growth. The viability, however, was reduced after the cells reached a stationary phase. The degradation products, such as dibutyltin (DBT) and monobutyltin (MBT), were not detected in the growth medium, indicating that the isolate has no ability to degrade TBT into less toxic DBT and MBT. Up to about 10^7.5 TBT molecules were adsorbed by a single cell. The observation of morphological changes with an electron microscope showed that the cell surface became wrinkled after exposure to the lethal concentration of 10 mM TBTCl. These results indicate that the resistance of the isolate toward the toxicity of TBTCl is not related to the unique cell surface, which seems to play an important role in preventing the diffusion of TBTCl into the cytoplasm.     

Compressional behaviour of CaNiSi2O6 clinopyroxene: bulk modulus systematic and cation type in clinopyroxenes

A single-crystal of composition CaNiSi₂O₆ (space group C2/c) was investigated at high pressure up to about 7.8 GPa by X-ray diffraction. The unit-cell parameters were measured at 18 different pressures. The P-V data were fitted by a third-order Birch-Murnaghan equation of state V₀=435.21(1) ų, K ₀=117.6(3) GPa and K^=6.4(1). The linear axial compressibilities _a, _b, _c and a sin are 2.14(1), 3.00(1), 2.43(1) and 1.63(1) × 10–3 GPa^–1. Comparing the compressibility data with other CaM1Si₂O₆ pyroxenes we suggest that the empirical K × V = constant relationships are followed in C2/c pyroxenes only if the same valence electron character is shared.     

Necessary condition for the existence of algebraic first integrals

Existence of algebraic first integrals for a class of dynamical systems is discussed in connection with the nature of the singularities of solutions. It is shown that under some conditions, the existence of algebraic first integrals controls a quantity characterising a singularity (Kowalevski's exponent) which can be calculated in a finite procedure. Two simple examples are given, which illustrate how main theorems work.     

Kuroshio warm filament and the source of the warm water of the Tsushima Current

Characteristics and evolution of the Kuroshio frontal eddies and warm filaments are analyzed according to two series of satellite images (March 5 to 7, 1986 and April 14 to 16, 1988). The results show that the frontal eddies in the East China Sea are generated at the shelf break and move along the continental slope at a speed of 15 cm/s with the Kuroshio. The frontal eddies occur about every 10 d and evolve to be warm filaments a few hundred km in length and 30-40 km in width in the area west of the Yaku-shima. Meanwhile, the existence of the warm filament was also found in the area by analysing the hydrographic data in the area west of Kyushu during May 24-June 5, 1988.The Kuroshio warm filaments move westward opposite to the Kuroshio and then turn northward at the shelf break and become the main source of the warm water of the Tsushima Warm Current. A simple dynamic explanation for the process is presented in this paper.     

Moho depth variation beneath southwestern Japan revealed from the velocity structure based on receiver function inversion

The Philippine Sea plate is subducting under the Eurasian plate beneath the Chugoku-Shikoku region, southwestern Japan. We have constructed depth contours for the continental and oceanic Mohos derived from the velocity structure based on receiver function inversion. Receiver functions were calculated using teleseismic waveforms recorded by the high-density seismograph network in southwestern Japan. In order to determine crustal velocity structure, we first improved the linearized time-domain receiver function inversion method. The continental Moho is relatively shallow ( 30 km) at the coastline of the Sea of Japan and at the Seto Inland Sea, and becomes deeper–greater than 40 km–around 35°N and 133.8°E. Near the Seto Inland Sea, a low-velocity layer of thickness 10 km lies under the continental Moho. This low-velocity layer corresponds to the subducting oceanic crust of the Philippine Sea plate. The oceanic Moho continues to descend from south to northwest and exhibits complicated ridge and valley features. The oceanic Moho runs around 25 km beneath the Pacific coast and 45 km beneath the Seto Inland Sea, and it extends to at least to 34.5°N. The depth variation of the Moho discontinuities is in good qualitative agreement with the concept of isostasy. From the configurations of both the continental and oceanic Mohos, we demonstrate that the continental lower crust and the subducting oceanic crust overlap beneath the southern and central part of Shikoku and that a mantle wedge may exist beneath the western and eastern part of Shikoku. The southern edge of the overlapping region coincides with the downdip limit of the slip area of a megathrust earthquake.     

Selective release of D and 13C from insoluble organic matter of the Murchison meteorite by impact shock

Abstract— We performed shock‐recovery experiments on insoluble organic matter (IOM) purified from the Murchison meteorite, and determined the abundances and isotope ratios of hydrogen and carbon in the shocked IOM sample. We also performed shock experiments on type III kerogen and compared the results of these experiments with the experimental results regarding IOM. The shock selectively released D and ¹³C from the IOM, while it preferably released H and ¹²C from the kerogen. The release of these elements from IOM cannot be explained in terms of the isotope effect, whereas their release from kerogen can be explained by this effect. The selective release of heavier isotopes from IOM would be due to its structure, in which D and ¹³C‐enriched parts are present as an inhomogeneity and are weakly attached to the main network. Shock gave rise to a high release of D even at a lower degree of dehydrogenation compared with the stepwise heating of IOM. This effective release of D is probably an inherent result of shock, in which a dynamic high‐pressure and high‐temperature condition prevails. Thus, shock would effectively control the hydrogen isotope behavior of extraterrestrial organic matter during the evolution of the solar nebula.