Performance of the complete travel-time equation of state at simultaneous high pressure and temperature

The complete travel-time equation of state (CT-EOS) is presented by utilizing thermodynamics relations, such as; $$K_T = K_S (1 + \alpha \gamma T)^{ - 1} , \gamma = \frac{{\alpha K_S }}{{\rho C_P }}, \left. {\frac{{\partial C_P }}{{\partial P}}} \right)_T = - \frac{T}{\rho }\left[ {\alpha ^2 + \left. {\frac{{\partial \alpha }}{{\partial T}}} \right)_P } \right], etc.$$ The CT-EOS enables us to analyze ultrasonic experimental data under simultaneous high pressure and high temperature without introducing any assumption, as long as the density, or thermal expansivity, and heat capacity are also available as functions of temperature at zero pressure. The performance of the CT-EOS was examined by using synthesized travel-time data with random noise of 10^?5 and 10^?4 amplitude up to 4 GPa and 1500 K. Those test conditions are to be met with the newly developed GHz interferometry in a gas medium piston cylinder apparatus. The results suggest that the combination of the CT-EOS and accurate experimental data (10^?4 in travel time) can determine thermodynamic and elastic parameters, as well as their derivatives with unprecedented accuracy, yielding second-order pressure derivatives (?² M/?P ²) of the elastic moduli as well as the temperature derivatives of their first-order pressure derivatives ?² M/?P?T). The completeness of the CT-EOS provides an unambiguous criterion to evaluate the compatibility of empirical EOS with experimental data. Furthermore because of this completeness, it offers the possibility of a new and absolute pressure calibration when X-ray (i.e., volume) measurements are made simultaneously with the travel-time measurements.     

Narrow-line dynamics in Seyfert and starburst nuclei

Rotating disks and expanding supershells of ionized gas are supposed to be kinematical components essential for the formation of emission-like profiles from starburst nuclei and the narrow-line regions of Seyfert galaxies. Simple models predict a few typical features of line profiles by which disks may be recognized.A giant supershell is identified SE of the nucleus of the starburst galaxy NGC 253. We suggest that the variously reported outflow cones in Seyfert nuclei are also induced by superbubble dynamics. Observations of NGC 4151 are shown to be consistent with this scenario.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Chemical exchange during hydrothermal alteration of basalt by seawater—I. Experimental results for major and minor components of seawater

Fresh mid-ocean ridge basalt of varying crystallinity has been powdered and reacted with seawater and an artificial Na-K-Ca-Cl solution at 200–500°C and 500–1000 bar in sealed gold capsules. Water/rock mass ratios of 1–3 were used and durations ranged from 2 to 20 months.These time periods were sufficient for most elements to approach a steady-state concentration in solution which was determined by equilibrium with alteration minerals (Mg, SiO₂, SO₄), by rate of formation of these minerals (Na, Ca), or by depletion from the rock (K, B, Ba). The resulting solutions closely resemble the brines from the basalt-seawater geothermal system at Reykjanes, Iceland. Mg was almost completely removed from seawater into the alteration products smectite, tremolite-actinolite, or talc. Sulfate also was removed to low concentrations, both by precipitation of anyhydrite and by reduction to sulfide. Net transfer of Na from seawater into solids occurred in most experiments by formation of sodic feldspar and possibly analcime. Sr was removed from seawater in some experiments but showed no change or a small gain in others. SiO₂, Ca, K, Ba, B and CO₂ were leached from basalt and enriched in solution. SiO₂ concentrations were controlled by saturation with quartz at 300°C and above. The principal Ca-bearing phases which formed were anhydrite, the hydrated Ca-silicate truscottite, tremolite-actinolite, and possibly wairakite. No K-rich phases formed. For some minerals the crystallinity of the starting basalt affected the amount which formed.Removal of Mg from seawater into solid alteration products occurred rapidly and was balanced largely by leaching of Ca from basalt. Net transfer of Na from seawater into solids occurred more slowly and was balanced mainly by leaching of additional Ca from basalt. Thus, reaction between seawater and basalt at low water/rock ratios can be considered to consist of two exchanges: Mg for Ca, and Na for Ca.     

War and the commons: Assessing the changing politics of violence, access and entitlements in Sri Lanka

There are two antagonistic, but equally influential traditions in the study of the nexus between resource use and violent conflict. One works through a Malthusian frame linking resource scarcity with violence, the other school of thought establishes a nexus between resource abundance and the incentives to use violence for rent monopolisation in a political economy of war or markets of violence. The tacit essentialism inherent in both schools of thought has increasingly come under critical scrutiny by geographers and anthropologists. To escape such essentialism requires a more detailed study of the dynamism of the political economy of (civil) war and its spatial dynamics, the political geographies of violence. In this paper, we study endowments and entitlements of people depending on common-pool or open-access resources in war-affected areas of Sri Lanka. Rural spaces in the war-affected areas became both a strategic retreat for fighters and an important common-pool resource on which a large part of the rural populace depended for their survival. Our research illustrates how the political geographies of war affect access regimes and entitlements to common-pool resources and thereby confine the livelihood opportunities of resource users. These dynamics of the political economy of war cross different scales and go beyond simple place-based struggles, for they are rooted in broader spatial dynamics of warfare creating place-space tensions in the sense that spatial dynamics of military control impinge changing access regimes upon specific places.     

Seismic lamination and anisotropy of the Lower Continental Crust

Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric.     

The transition from peraluminous to peralkaline granitic melts: Evidence from melt inclusions and accessory minerals

Fractional crystallization of peraluminous F- and H₂O-rich granite magmas progressively enriches the remaining melt with volatiles. We show that, at saturation, the melt may separate into two immiscible conjugate melt fractions, one of the fractions shows increasing peraluminosity and the other increasing peralkalinity. These melt fractions also fractionate the incompatible elements to significantly different degrees. Coexisting melt fractions have differing chemical and physical properties and, due to their high density and viscosity contrasts, they will tend to separate readily from each other. Once separated, each melt fraction evolves independently in response to changing T/P/X conditions and further immiscibility events may occur, each generating its own conjugate pair of melt fractions. The strongly peralkaline melt fractions in particular are very reactive and commonly react until equilibrium is attained. Consequently, the peralkaline melt fraction is commonly preserved only in the isolated melt and mineral inclusions.

We demonstrate that the differences between melt fractions that can be seen most clearly in differing melt inclusion compositions are also visible in the composition of the resulting ore-forming and accessory minerals, and are visible on scales from a few micrometers to hundreds of meters.     

Origin of the northern Indus Fan and Murray Ridge, Northern Arabian Sea: interpretation from seismic and magnetic imaging

The nature and origin of the sediments and crust of the Murray Ridge System and northern Indus Fan are discussed. The uppermost unit consists of Middle Miocene to recent channel–levee complexes typical of submarine fans. This unit is underlain by a second unit composed of hemipelagic to pelagic sediments deposited during the drift phase after the break-up of India–Seychelles–Africa. A predrift sequence of assumed Mesozoic age occurring only as observed above basement ridges is composed of highly consolidated rocks. Different types of the acoustic basement were detected, which reflection seismic pattern, magnetic anomalies and gravity field modeling indicate to be of continental character. The continental crust is extremely thinned in the northern Indus Fan, lacking a typical block-faulted structure. The Indian continent–ocean transition is marked on single MCS profiles by sequences of seaward-dipping reflectors (SDR). In the northwestern Arabian Sea, the Indian plate margin is characterized by several phases of volcanism and deformation revealed from interpretation of multichannel seismic profiles and magnetic anomalies. From this study, thinned continental crust spreads between the northern Murray Ridge System and India underneath the northern Indus Fan.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

Seismic wave velocity and anisotropy of serpentinized peridotite in the Oman ophiolite

Shallow seismic measurements in harzburgite from the Oman ophiolite performed in a zone where the maximum horizontal anisotropy is expected (vertical foliation and horizontal lineation) point to a dominant dependence of seismic properties on fracturing.

Optical microscopy studies show that microcracks are guided by the serpentine (lizardite) penetrative network oriented subparallel to the harzburgite foliation and subperpendicular to the mineral lineation, and that serpentine (lizardite) vein filling has a maximum concentration of (001) planes parallel to the veins walls. The calculated elastic properties of the oriented alteration veins filled with serpentine in an anisotropic matrix formed by oriented crystals of olivine and orthopyroxene are compared with seismic velocities measured on hand specimens.

Laboratory ultrasonic data indicate that open microcracks are closed at 100 MPa pressure, e.g. (J. Geophys. Res. 65, (1960) 1083) and (Proc. ODP Sci. Results Leg 118, (1990) 227). Above this pressure, laboratory measurements and modeling show that P-compressional and S-shear wave velocities are mainly controlled by the mineral preferred orientation. Veins sealed with serpentine are effective in slightly lowering P and S velocities and increasing anisotropy. The penetrative lizardite network does not affect directly the geometry of seismic anisotropy, but contributes indirectly in the fact that this network controls the microcrack orientations.

Comparison between seismic measurements of peridotite and gabbro in the same conditions suggest that P- and S-waves anisotropies are a possible discriminating factor between the two lithologies in the suboceanic lithosphere.