Pesticides Removal by Filtration over Cactus Pear Leaves: A Cheap and Natural Method for Small‐Scale Water Purification in Semi‐Arid Regions

This study aims to examine the efficiency of Opuntia ficus‐indica for removing organochlorine pesticides from surface waters. Adsorption properties such as size, dose, and time of O. ficus‐indica for aldrin, dieldrin, and dichlorodiphenyltrichloroethane (DDT) were studied through stirring and column methods. Because of their high affinity and swelling characteristics, dried O. ficus‐indica was studied in stirring while fresh unpeeled O. ficus‐indica was applied in both stirring and column experiments and proved to be well‐suited to column application. Before removing pesticides, the column was flashed with distilled water eliminate the turbidity and smell from fresh unpeeled cactus. The removal of pesticides increased with an increasing adsorbent dose and decreased with adsorbent particle sizes. The optimum adsorbent dose is 10 g for dried and 15 g for fresh unpeeled O. ficus‐indica. The experimental results show that O. ficus‐indica possesses strong adsorption ability for aldrin, dieldrin, and DDT, and the adsorption isotherm data obeyed the Freundlich model. The results of our small‐scale experiments suggest a strong potential to develop local small‐scale water treatment units that can be used at the level of individual households or local communities, using a widely available adsorbent.     

Development of fouling communities on vertical structures in the Baltic Sea

The pillars of the bridge connecting the Island of Öland with the Swedish mainland were rebuilt between 1990 and 2000. The renovation produced pristine vertical concrete substrates, which became submerged in known years and seasons. The fouling communities on the pillars were examined in 2001 to determine whether the community structure could be explained in terms of either orderly successional development or of seasonal variation in the settlement of benthic organisms. As well, the communities on the pillars were compared to communities on the vertical surfaces of boulders in the area. The results indicated that an annual species composition is the final stage in the succession on the observed, vertical constructions. The few perennial species add to the variation between pillars as they increase in biomass (Polysiphonia fucoides) or become out-competed (Balanus improvisus). Also, observed seasonal differences in the biomass of these perennial species indicated that the time of year free space becomes available might be an important determinant of the future structure of the community. Comparison between the pillar and boulder communities showed that the artificial structures were not surrogates for the natural hard substrate: pillar communities differed in that they lacked most perennial algal species and had a high biomass of B. improvisus.     

Cycling the representer algorithm for variational data assimilation with a nonlinear reduced gravity ocean model

The representer method was used by [Ngodock, H.E., Jacobs, G.A., Chen, M., 2006. The representer method, the ensemble Kalman filter and the ensemble Kalman smoother: a comparison study using a nonlinear reduced gravity ocean model. Ocean Modelling 12, 378–400] in a comparison study with the ensemble Kalman filter and smoother involving a 1.5 nonlinear reduced gravity idealized ocean model simulating the Loop Current (LC) and the Loop Current eddies (LCE) in the Gulf of Mexico. It was reported that the representer method was more accurate than its ensemble counterparts, yet it had difficulties fitting the data in the last month of the 4-month assimilation window when the data density was significantly decreased. The authors attributed this failure to increased advective nonlinearities in the presence of an eddy shedding causing the tangent linear model (TLM) to become inaccurate. In a separate study [Ngodock, H.E., Smith, S.R., Jacobs, G.A., 2007. Cycling the representer algorithm for variational data assimilation with the Lorenz attractor. Monthly Weather Review 135 (2), 373–386] applied the cycling representer algorithm to the Lorenz attractor and demonstrated that the cycling solution was able to accurately fit the data within each cycle and beyond the range of accuracy of the TLM, once adjustments were made in the early cycles, thus overcoming the difficulties of the non-cycling solution. The cycling algorithm is used here in assimilation experiments with the nonlinear reduced gravity model. It is shown that the cycling solution overcomes the difficulties encountered by the non-cycling solution due to a limited time range of accuracy of the TLM. Thus, for variational assimilation applications where the TLM accuracy is limited in time, the cycling representer becomes a very powerful and attractive alternative, given that its computational cost is significantly lower than that of the non-cycling algorithm.     

Econometric analysis to differentiate effects of various ship safety inspections

This article provides a refined technique to measure and interpret variables associated with the quality of an inspection—be it port state control or vetting inspections towards the probability of a very serious, serious or less serious casualty. It concentrates on filtering out the effect of variables such as detention, the port state control regime that inspected the vessel, time in-between inspections, deficiencies found during an inspection and the effect of vetting inspections. The consensus amongst policy makers in the shipping industry is that data cannot be combined to target vessels. While this article does demonstrate that the decrease in the probability of casualty is stronger for the South American Region, the Indian Ocean Region and Australia versus North Europe, North America or the Caribbean, it also demonstrates that the data can be combined to target vessels for inspections. Since the time in-between inspections and detention is mostly not significant towards decreasing the probability of casualty, these results reflect the lack of coordination amongst port state control regimes and industry inspections. Due to this lack of coordination and trust, a ship might be inspected in several regimes during a relative short time period where the benefit of an inspection can be easily saturated. Our recommendation on direct policy implication is to promote the harmonization of inspection databases across port state control regimes, preferably with the coordination of the development of the Global Integrated Ship Information System (GISIS) of the International Maritime Organization (IMO), to review the policy of a release of a vessel from detention and to increase cooperation amongst regimes with respect to the follow up of the rectification of deficiencies.     

Estimating Deep Seafloor Interface and Volume Roughness Parameters Using the Multibeam-Hydrosweep System

Utilizing a hull-mounted, multinarrow beam echosounder onboard RV Polarstern, we measured variation of acoustic backscatter with incidence angles at two different sites in the Southern Oceans (Agulhas Plateau and the Riiser Larsen Sea). We modeled the data, using a composite roughness model, including water-sediment interface roughness and sediment volume roughness parameters. The model effectively uses the near normal incidence angle backscatter to determine the seafloor interface roughness parameters employing Helmholtz-Kirchhoff theory. Beyond 20° incidence angles, an application of Rayleigh-Rice theory is made by using a necessary splicing technique (combining both of the theories at 20° incidence angle). The estimated interface and volume roughness parameters are found to be in accordance with the known area geology.     

After UNCLOS: the future of international marine research

The April 1984 special issue of Marine Policy included an overview article on international marine research in the post-UNCLOS era: ‘Marine science: organizing the study of the oceans’ by Henry Charnock. We sent a galley proof of the article to Dr Hans Tambs-Lyche, formerly of ICES, for comment and we are pleased to publish his remarks.     

Benthic photosynthesis in submerged Wadden Sea intertidal flats

In this study we compare benthic photosynthesis during inundation in coarse sand, fine sand, and mixed sediment (sand/mud) intertidal flats in the German Wadden Sea. In situ determinations of oxygen-, DIC- and nutrient fluxes in stirred benthic chamber incubations were combined with measurements of sedimentary chlorophyll, incident light intensity at the sediment surface and scalar irradiance within the sediment. During submergence, microphytobenthos was light limited at all study sites as indicated by rapid response of gross photosynthesis to increasing incident light at the sea floor. However, depth integrated scalar irradiance was 2 to 3 times higher in the sands than in the mud. Consequently, gross photosynthesis in the net autotrophic fine sand and coarse sand flats during inundation was on average 4 and 11 times higher than in the net heterotrophic mud flat, despite higher total chlorophyll concentration in mud. Benthic photosynthesis may be enhanced in intertidal sands during inundation due to: (1) higher light availability to the microphytobenthos in the sands compared to muds, (2) more efficient transport of photosynthesis-limiting solutes to the microalgae with pore water flows in the permeable sands, and (3) more active metabolic state and different life strategies of microphytobenthos inhabiting sands.