Preliminary Results from the Magnetic Field Measurements Using MAGDAS at Ilorin, Nigeria

MAGDAS, the Magnetic Data Acquisition System, was successfully installed at the University of Ilorin, Nigeria—an equatorial station—in August 2006. MAGDAS is an important component of the International Heliophysical Year, IHY. We examined the preliminary results obtained from the analysis of the geomagnetic data obtained from the MAGDAS measurement. Diurnal variations of the solar quiet daily variation in the three geomagnetic elements, H, D, Z were studied. The obtained signatures of the magnetic field variations were discussed in the context of the literature. The day-to-day variability of the horizontal and vertical intensities as well as the declination of the geomagnetic field were examined. The study justified the need for a partner magnetic field observatory along same meridian as Ilorin, north or south of it, to facilitate synthesis of the equatorial electrojet effect.     

An HLLC Riemann solver for relativistic flows – II. Magnetohydrodynamics

An approximate Riemann solver for the equations of relativistic magnetohydrodynamics (RMHD) is derived. The Harten–Lax–van Leer contact wave (HLLC) solver, originally developed by Toro, Spruce and Spears, generalizes the algorithm described in a previous paper to the case where magnetic fields are present. The solution to the Riemann problem is approximated by two constant states bounded by two fast shocks and separated by a tangential wave. The scheme is Jacobian-free, in the sense that it avoids the expensive characteristic decomposition of the RMHD equations and it improves over the HLL scheme by restoring the missing contact wave.
Multidimensional integration proceeds via the single step, corner transport upwind (CTU) method of Colella, combined with the constrained transport (CT) algorithm to preserve divergence-free magnetic fields. The resulting numerical scheme is simple to implement, efficient and suitable for a general equation of state. The robustness of the new algorithm is validated against one- and two-dimensional numerical test problems.     

Crustal structure of the Ordovician Macquarie Arc,Eastern Lachlan Orogen,based on seismic‐reflection profiling

In the Eastern Lachlan Orogen, the mineralised Molong and Junee‐Narromine Volcanic Belts are two structural belts that once formed part of the Ordovician Macquarie Arc, but are now separated by younger Silurian‐Devonian strata as well as by Ordovician quartz‐rich turbidites. Interpretation of deep seismic reflection and refraction data across and along these belts provides answers to some of the key questions in understanding the evolution of the Eastern Lachlan Orogen—the relationship between coeval Ordovician volcanics and quartz‐rich turbidites, and the relationship between separate belts of Ordovician volcanics and the intervening strata. In particular, the data provide evidence for major thrust juxtaposition of the arc rocks and Ordovician quartz‐rich turbidites, with Wagga Belt rocks thrust eastward over the arc rocks of the Junee‐Narromine Volcanic Belt, and the Adaminaby Group thrust north over arc rocks in the southern part of the Molong Volcanic Belt. The seismic data also provide evidence for regional contraction, especially for crustal‐scale deformation in the western part of the Junee‐Narromine Volcanic Belt. The data further suggest that this belt and the Ordovician quartz‐rich turbidites to the east (Kirribilli Formation) were together thrust over ?Cambrian‐Ordovician rocks of the Jindalee Group and associated rocks along west‐dipping inferred faults that belong to a set that characterises the middle crust of the Eastern Lachlan Orogen. The Macquarie Arc was subsequently rifted apart in the Silurian‐Devonian, with Ordovician volcanics preserved under the younger troughs and shelves (e.g. Hill End Trough). The Molong Volcanic Belt, in particular, was reworked by major down‐to‐the‐east normal faults that were thrust‐reactivated with younger‐on‐older geometries in the late Early ‐ Middle Devonian and again in the Carboniferous.     

Experimental evidences and numerical modelling of debris flow initiated by channel runoff

Debris flow initiation by channel bed mobilization is a common process in high mountainous areas. Initiation is more likely to occur at the outlet of small, steeply sloping basins where concentrated overland flow feeds an ephemeral channel incised in slope deposits. Such geological conditions are typical of the Dolomite region (Italian Alps), which is characterized by widespread debris flow activity triggered by severe summer thunderstorms. Real-time data and field observations for one of these catchments (Acquabona catchment, Belluno, Italian Alps) were used to characterize the hydrological response of the initiation area to rainfalls of varying intensity and duration. The observed behaviour was then reproduced by means of a simple hydrological model, based on the kinematic wave assumption, to simulate the generation of channel runoff. The model is capable of predicting the observed hydrological response for a wide range of rainfall impulses, thus providing a physical basis for the understanding of the debris flow triggering threshold.     

Water quality impacts from mining in the Black Hills,South Dakota,USA

The focus of this research was to determine if abandoned mines constitute a major environmental hazard in the Black Hills. Many abandoned gold mines in the Black Hills contribute acid and heavy metals to streams. In some areas of sulfide mineralization local impacts are severe, but in most areas the impacts are small because most ore deposits consist of small quartz veins with few sulfides. Pegmatite mines appear to have negligible effects on water due to the insoluble nature of pegmatite minerals. Uranium mines in the southern Black Hills contribute some radioactivity to surface water, but the impact is limited because of the dry climate and lack of runoff in that area.     

Mineralogy, geochemistry, and Nd isotope composition of the Rainbow hydrothermal field, Mid-Atlantic Ridge

Petrological, geochemical, and Nd isotopic analyses have been carried out on rock samples from the Rainbow vent field to assess the evolution of the hydrothermal system. The Rainbow vent field is an ultramafic-hosted hydrothermal system located on the Mid-Atlantic Ridge characterized by vigorous high-temperature venting (∼365°C) and unique chemical composition of fluids: high chlorinity, low pH and very high Fe, and rare earth element (REE) contents (Douville et al., Chemical Geology 184:37–48, 2002). Serpentinization has occurred under a low-temperature (<270°C) retrograde regime, later overprinted by a higher temperature sulfide mineralization event. Retrograde serpentinization reactions alone cannot reproduce the reported heat and specific chemical features of Rainbow hydrothermal fluids. The following units were identified within the deposit: (1) nonmineralized serpentinite, (2) mineralized serpentinite—stockwork, (3) steatite, (4) semimassive sulfides, and (5) massive sulfides, which include Cu-rich massive sulfides (up to 28wt% Cu) and Zn-rich massive sulfide chimneys (up to 5wt% Zn). Sulfide mineralization has produced significant changes in the sulfide-bearing rocks including enrichment in transition metals (Cu, Zn, Fe, and Co) and light REE, increase in the Co/Ni ratios comparable to those of mafic Cu-rich volcanic-hosted massive sulfide deposits and different ¹⁴³Nd/¹⁴⁴Nd isotope ratios. Vent fluid chemistry data are indicative of acidic, reducing, and high temperature conditions at the subseafloor reaction zone where fluids undergo phase separation most likely under subcritical conditions (boiling). An explanation for the high chlorinity is not straightforward unless mixing with high salinity brine or direct contribution from a magmatic Cl-rich aqueous fluid is considered. This study adds new data, which, combined with the current knowledge of the Rainbow vent field, brings compelling evidence for the presence, at depth, of a magmatic body, most likely gabbroic, which provides heat and metals to the system. Co/Ni ratios proved to be good tools used to discriminate between rock units, degree of sulfide mineralization, and positioning within the hydrothermal system. Deeper units have Co/Ni <1 and subsurface and surface units have Co/Ni >1.     

Semi-Analytic Modelling of Subsidence

This paper presents a forward model for subsidence prediction caused by extraction of hydrocarbons. The model uses combinations of analytic solutions to the visco-elastic equations, which approximate the boundary conditions. There are only a few unknown parameters to be estimated, and, consequently, calculations are very fast. The semi-analytic model is applicable to a uniform and layer-cake stratigraphy, with visco-elastic parameters changing per layer, and an arbitrary depletion pattern. By its capabilities to handle a multi-layered visco-elastic subsurface, the semi-analytic model fills the gap between the analytic single-layered elastic models available to date and the more elaborate numerical, e.g. finite element, models.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.