Interference of Multiple Strip Footings on Sand Using Small Scale Model Tests

By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to (i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data, however, indicates much greater effect of interference especially for larger spacing among footings.     

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

Monitoring Large-Scale Tests for Nuclear Waste Disposal

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.     

Identification of chlorite and chlorite-related minerals in sediments

A scheme is presented for the identification and classification of chlorite and related minerals in sediments which is mainly based on X-ray characteristics of the orginal sample and the sample heated at 350°C and treated with K⁺ and with glycerol. Examples are given. It is emphasized that additional data about clay mineral genesis, electron microscopy, infrared spectroscopy and chemical analyses are needed for the ordening of a certain mineral in the proposed scheme. Many names of minerals so far found to occur in the clay separate of sediments proved to be synonymous (52 of a total of 88) and thus should be abandoned. They only give confusion and needlessly increase the many difficulties which already exist in the identification, classification and quantitative determination of this complicated group of minerals of about 36 well defined specimens which may be found in sediments.     

An optimized method for automated analysis of algal pigments by HPLC

A recent development in algal pigment analysis by high-performance liquid chromatography (HPLC) is the application of automation. An optimization of a complete sampling and analysis protocol applied specifically in automation has not yet been performed. In this paper we show that automation can only be successful if the various methodological aspects of the sampling and analysis protocol are considered in coherence. We introduce an optimized protocol that involves freeze-drying of the sample, subsequent extraction in 90% acetone and the application of water-packing during analysis. The method was evaluated on both natural plankton populations and a broad spectrum of microalgal cultures: Thalassiosira weisflogii (Bacillariophyceae), Emiliania huxleyi (Prymnesiophyceae), Phaeocystis globosa and Phaeocystis antarctica (Prymnesiophyceae) and Pyramimonas sp. (Prasinophyceae). Whereas pigment extracts were unstable in methanol, with recorded chlorophyll a losses from 10% to 60% per day, pigment degradation rates in acetone were generally less than 1% over 18 h storage in the autosampler (4 °C). In addition, it was found that the extraction efficiency of acetone significantly increased upon freeze-drying prior to extraction. Increases as high as 50–60% were measured in P. antarctica. The application of water-packing of the sample during injection resulted in improved peak shape and peak separation, without diluting the pigment concentrations. Automation is especially beneficial for application in the field, when mixed algal assemblages and low biomass put a high demand on the sensitivity as well as reproducibility of the method.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.     

大别山地区石榴石橄榄岩的岩石学和地球化学

本文首次对我国石榴石橄榄岩类岩石进行系统的岩石学和地球化学研究。通过对大别山地区两个不同类型岩体中的石榴石橄榄岩的岩石学、岩石化学、矿物化学和稀土元素地球化学研究,表明这类岩石属钙碱性系列超基性岩;与地幔成分相比,富集易熔元素,亏损难熔元素;利用矿物地质温压计估算其形成压力为2×10~9pa,成岩温度为600～700℃具有正铕异常和轻稀土元素富集特征 推测为地壳下部的超基性岩经深成变质而成。     

安徽宣城地区中晚更新世风成堆积与环境变迁

通过对宣城向阳中晚更新世沉积剖面的综合研究,认为该剖面与中国北方同时代的黄土—古土壤剖面相比较,虽然长江下游以南地区中晚更新世多个冰期中风成堆积的单层厚度与累积厚度,亦即风成物质的沉积通量与沉积速率均比北方黄土区要小,但它们所反映的气候与环境的变化具有明显的可比性。     

Glaciomarine sedimentation and palaeo-glacial setting of Maxwell Bay and its tributary embayment, Marian Cove, South Shetland Islands, West Antarctica

High-resolution (3.5 kHz and multi-channel) seismic profiles and piston cores were collected from Maxwell Bay and its tributary embayment, Marian Cove, in the South Shetland Islands, Antarctica, during the Korea Antarctic Research Program (1992/93 and 1995/96) to elucidate the glaciomarine sedimentation processes and recent glacial history of the area. Seismic data from Maxwell Bay reveal a rugged bay margin and flattened basin floor covered with well-stratified hemipelagic muds. On the base-of-slope, acoustically transparent debris flows occur, indicating downslope resedimentation of glaciomarine sediments. Despite the subpolar and ice-proximal settings of Marian Cove, the seafloor is highly rugged with a thin sediment drape, suggesting that much of the area has been recently eroded by glaciers. Sediment cores from the cove penetrated three distinct fining-upward lithofacies: (1) basal till in the lower part of the core, accumulated just seaward of the grounding line of the tidewater glacier; (2) interlaminated sand and mud in the middle part, deposited in ice-proximal zone by a combination of episodic subglacial meltwater inflow and iceberg dumping; and (3) pebbly mud in the upper part, deposited in ice-distal zone by both surface meltwater plume and ice-rafting from the glacier front. A reconstruction of the glacial history of these areas since the late glacial maximum shows an ice sheet filling Maxwell Bay in late Wisconsin time and grounding of the tidewater glacier in Marian Cove until about 1300 yr BP.