无公害刺参稳产健康养殖新技术

本文针对目前刺参养殖中存在的问题,简单明了叙述刺参无公害健康养殖一系列新技术和新方法,对推动海参养殖业持续、稳定、健康发展,起到积极作用和效果。     

甲醛前处理对提取海带褐藻胶质与量的影响

褐藻胶(Na-alginate)工业在国外已有半个多世纪的历史,其工艺流程及生产设备等都日趋标准化,产品的种类及其在工业上的用途也走向多样化。我国在五十年代初期曾呈奎和纪明侯就用野生的马尾藻作为原料进行了褐藻胶的提取研究,井确立了褐藻胶的生产工艺,从而诞生了我国的褐藻胶工业。六十年代以来,由于海带的大量人工栽培，褐藻胶生产便采用海带作为原料,由此,这个新兴工业迅猛发展。目前,中国的褐藻胶生产的规模和产量在世界上已名列前矛,除了主产品褐藻胶以外,还同时生产甘露醇、碘等联产品。但这个工业还存在不少问题,特別是褐藻胶的粘度、透明度及色泽等质量指标是人们极为关切的问题。本文拟就海藻原料的前处理工艺对胶的质量和产量的影响做一系统的研究。     

莱州湾海湾扇贝养殖区海水中悬浮颗粒的动态变化

1997年10月和1998年6月，在莱州湾两个主要海湾扇贝养殖区－芙蓉岛海区和金城海区，各定点进行了24h连续观测和取样，并在实验室内分析了总颗粒物（TPM）、颗粒有机物（POM）和叶绿素α的含量。结果表明，6月份金城海区的颗粒有机物和叶绿素α的含量均高于荚蓉岛海区；在10月份，芙蓉岛海区颗粒有机物的含量高于金城海区，但其叶绿素α的含量却低于金城海区，表明金城海区颗粒有机物的质量高于芙蓉岛海区。     

“暖池”表层对大气局地强迫的响应特征

利用湍流动能垂直混合模式和ＴＯＧＡ－ＣＯＡＲＥ加强观测期的观测资料,对“暖池”上混合层的垂直混合过程进行数值试验和数值模拟,分析表层温度、盐度的变化特征。结果表明：ＴＫＥ模式可以较好地模拟混层,尤其是表层温度、盐度对大气局地强迫的响应;太阳辐射是热源,感热、潜热通量等会造成“暖池”上混合层的温度降低,“暖池”对大气释放热量;降水有利于“淡水盖”形成和维持,从则使层结稳定,ＳＳＴ升高。但在气温低于海     

烟台套子湾八角深水港的开发研究

通过调查和比较，认为在我国渤海和北黄海南岸的套子湾八角海区是一个条件优越的深水港址，在阐述开发八角深水港的重要意义同时，根据城市布局规划和岸线及水域资源，参照国际港口未来发展趋势，结合我国对中、西部地区经济发展战略，对八角深水港的开发和布局进行了研究，为烟台市发展成为“现代化、国际型港口城市”，提出了港区未来建设的模式。     

Dinoflagellate cysts in recent marine sediment from Guangxi, China

Total of 33 species of dinoflagellate cysts were discovered from surface sediment in the searegion of Guangxi, among them 12 cyst types (Diplopsalopsis sp.1, D. sp. 2, D. sp. 3, Cochlodinium sp., Protoperidinium sp. 1, P. sp. 2, P. compressum , Scrippsiella sp. 1, S. sp. 2, Alexandrium sp. 1, A. sp. 2, A. sp. 3) were first reported from the South China Sea. And one cyst type (Cochlodinium sp.) was first reported in the world. Scrippsiella trochoidea is the dominant species in this area, accounting for 45% of all the cysts. There are 2 cysts of toxic dinoflagellate (Alexandrium tamarensis and Gymnodinium catenatum). But there is no relationship between cyst number and grain size distribution.     

Tephra Discovered in High Resolution Peat Sediment and Its Indication to Climatic Event

Floating tephra was deposited together with ice core,snow layer,abyssal sediment,lake sediments,and other geological records.It is of great significance to interpret the impact on the climate change of volcanic eruptions from these geological records.It is the first time that volcanic glass was discovered from the peat of Jinchuan(金川)Maar,Jilin(吉林)Province,China.And it is in situ sediments from a near-source explosive eruption according to particle size analysis and identification results.The tephra were neither from Tianchi(天池)volcano eruptions,Changbai(长白)Mountain,nor from Jinlongdingzi(金龙顶子)volcano about 1 600 aBP eruption,but maybe from an unknown eruption of Longgang(龙岗)volcano group according to their geochemistry and distribution.Geochemical characters of the tephra are similar to those of Jingiongdingzi,which are poor in s.Jica,deficient in alkali,Na20 content is more than K20 content,and are similar to distribution patterns of REE and incompatible elements,which helps to speculate that they originated from the same mantle magma with rare condemnation,and from basaltic explosive eruption of Longgang volcano group.The tephra,from peat with age proved that the eruption possibly happened in 15 BC-26 AD,is one of Longgang volcano group eruption that was not recorded and is earlier than that of Jinglongdingzi about 1 600 aBP eruption.And the sedimentary time of tephra is during the period of low temperature alteration.which may be the influence of eruption toward the local climate according to the correlativity of eruption to local temperature curve of peat cellulose oxygen isotope.     

Uniaxial compression and tension tests of anthracite and loading rate dependence of peak strength

The mechanical characteristics of coal under uniaxial compressive stress and uniaxial tensile stress are key factors in investigations of the stability of galleries and coal faces, and are vital considerations for the efficient design of coalmines, disaster prevention, and environmental preservation. These mechanical characteristics have long been a topic of research, but remain insufficiently understood. In this study we performed uniaxial compression tests and uniaxial tension tests on coal, with particular attention to two concerns. The first was to measure the loading rate dependence of the peak strength of coal. Coal shows high sample-to-sample scatter in strength; test methods that are successful in comparatively homogeneous rock types cannot be used for coal. We therefore used an alternative test method that was recently developed by the authors. Anthracite samples were subjected to alternating slow and fast strain rates. Measured variations in stress during this process were used to estimate the loading rate dependence of peak strength. The second objective was to obtain complete stress–strain curves for coal under uniaxial tensile stress. It is difficult to hold samples secure during a tensile test; consequently, such curves have yet to be obtained. This study presents a successful application of the authors' method to the analysis of coal samples, yielding a complete stress–strain curve under tensile stress. The two methods presented here hold promise for application not only to anthracite but also to a wide variety of coals. It is possible to derive the values of the constants used in constitutive equations from the obtained experimental results. Once these equations are determined, they can be incorporated into finite-element software to investigate various time-dependent behaviors of coal and aid in the efficient design of coalmines and the prevention of subsidence and mine disasters.     

Exploiting the dual functions of polymer depressants in fine particle flotation

Fine hydrophilic particles are known to be entrained with water in flotation of many ores. Flocculation of the hydrophilic particles by polymer depressants could potentially reduce the mechanical entrainment of these particles. This paper reports testwork completed on fine particles of several solids, iron oxide, hydroxyapatite and sphalerite, as well as on a relatively coarse quartz sample (− 75 + 38 μm). Dodecylamine was used as a collector for quartz, and several dispersants and polymer depressants, including sodium silicate, sodium metaphosphate, zinc sulfate, cornstarch, corn dextrin and carboxymethyl celluloses (with molecular weights of both 700,000 and 80,000) were used as flotation modifiers. The major part of the testwork involved flotation tests in a 200 mL flotation column. It was observed that flocculation of the fine hydrophilic particles significantly reduced their mechanical entrainment, while dispersion severely aggravated it. Thus, in the flotation separation of synthetic mixtures of the − 75 + 38 μm quartz and fine (reagent grade) iron oxide or hydroxyapatite, polymer depressants that caused flocculation performed better than those that did not cause flocculation.     

Towards models of strategic spatial choice behaviour: theory and application issues

Models of spatial choice behaviour have been around in geography urban planning for decades to assess the feasibility of planning actions or to predict external (competition) effects on existing destinations. Although these models differ in terms of complexity and key concepts, they all have in common that spatial choice behaviour is predicted as a function of the attributes of the choice alternatives and distance or travel time separation only. None of these models do take into account that the attributes of choice alternatives and travel time may be highly non-stationary and that often the utility that people derive from visiting a particular location also depends on the choice behaviour of other individuals. Under these circumstances, individuals may exhibit strategic choice behaviour. That is, they will choose particular choice options taking into account their expected behaviour of others such as to maximize their own utility. The purpose of the proposed paper is to discuss possible models of strategic choice behaviour for these urban planning problems. Theory will be outlined and some critical issues in the application of such models to problems of spatial choice will be discussed.