Genauigkeitserwartung photographischer Sternpositionen bei geschlossener Blockausgleichung

The theoretical accuracy of photographically determined star positions is studied, based on the assumption that the whole sphere is covered by a net of fields, 4 plates each, and that all the plates are adjusted simultaneously in a closed block. The influence of the number of fields on the accuracy is estimated by computing schematized spheric blocks containing only a few reference stars. If the plates are taken with a focal length of 2 meters, the block will consist of 2500 fields, and a mean accuracy of star position of 0.1 can be expected.     

SporadicE ionization associated with meteor events

Two meteor events which were sighted in the Gujarat skies of India, were accompained by the visibility of sporadicE ionization on the ionograms recorded at Ahmedabad (Geog. Lat. 23·2°N, long. 72·30°E). The first event was the Dhajala fireball which flashed into the geoatmosphere along an E-N to W-S trail at about 20·40 h IST on 28 January 1976; the closest distance of the ground projection of meteor trail from Ahmedabad was 50km. The other event was a possible meteor group sighted over Ahmedabad on 28 May 1978, at about 21·10 h IST. This work describes the nature of the sporadicE ionization observed on Ahmedabad ionograms during the two events. Features of theEs echo during the Dhajala event which indicate that it could be of meteoric origin are discussed. Meteor theory is used to relate the observed ionization with the physical dimensions of the Dhajala meteorite as obtained by other workers.     

X-ray transient sources

The galactic distribution and physical nature of X-ray transient sources is investigated. Two types of transients are considered. The observational data on 41 X-ray transient sources are given, and the average parameters of hard and soft X-ray transients are estimated.     

Sedimentation on the Ionian active margin (Hellenic arc) — Provenance of sediments and mechanisms of deposition

Lithological, sedimentological, mineralogical and faunal analyses of twenty cores from the western Peloponnesus margin and adjacent Matapan Trench permit the origin of the sediments and the processes of sedimentation to be defined in some detail.Except for the ash layers derived from the Ischian Province, the major part of the sediment is local in origin (Peloponnesus). Analyses of heavy, light and clay minerals enable three main provinces to be distinguished. Each of these provinces includes one or more slope basins and a portion of trench, without lateral connection between them and mixing of inputs.The diversity and complexity of sedimentary structures, the granulometric characters, the mixed fauna (molluscs and ostracods) and the variability of rates of sedimentation all testify to the prevalence of reworking phenomena and gravitative processes.These data confirm and elaborate on the model of sedimentation deduced from seismic studies in which sediments are successively trapped, released by the slope basins and transferred via channels and canyons towards the underlying trench basins. This “cascade feeding” appears characteristics of this subductive sedimentary environment.     

Thermodynamic controls on element partitioning between titanomagnetite and andesitic–dacitic silicate melts

Titanomagnetite–melt partitioning of Mg, Mn, Al, Ti, Sc, V, Co, Ni, Cu, Zn, Ga, Zr, Nb, Mo, Hf and Ta was investigated experimentally as a function of oxygen fugacity (fO₂) and temperature (T) in an andesitic–dacitic bulk-chemical compositional range. In these bulk systems, at constant T, there are strong increases in the titanomagnetite–melt partitioning of the divalent cations (Mg²⁺, Mn²⁺, Co²⁺, Ni²⁺, Zn²⁺) and Cu²⁺/Cu⁺ with increasing fO₂ between 0.2 and 3.7 log units above the fayalite–magnetite–quartz buffer. This is attributed to a coupling between magnetite crystallisation and melt composition. Although melt structure has been invoked to explain the patterns of mineral–melt partitioning of divalent cations, a more rigorous justification of magnetite–melt partitioning can be derived from thermodynamic principles, which accounts for much of the supposed influence ascribed to melt structure. The presence of magnetite-rich spinel in equilibrium with melt over a range of fO₂ implies a reciprocal relationship between a(Fe²⁺O) and a(Fe³⁺O_1.5) in the melt. We show that this relationship accounts for the observed dependence of titanomagnetite–melt partitioning of divalent cations with fO₂ in magnetite-rich spinel. As a result of this, titanomagnetite–melt partitioning of divalent cations is indirectly sensitive to changes in fO₂ in silicic, but less so in mafic bulk systems.     

Acid mine drainage at Cerro Rico de Potosí I: unabated high-strength discharges reflect a five century legacy of mining

Intensive mining and processing of Ag, Sn, Pb and Zn ores have occurred in various locations within and around the city of Potosí, Bolivia since 1545. Surface and subsurface waters, stream sediments and soils are contaminated with various ecotoxic metals in the headwaters of the economically vital, yet highly impacted, upper Rio Pilcomayo watershed. Previous studies have documented downstream trace metal contamination, however, not addressed specific sources. The AMD discharges identified in this study help link downstream pollution to primary origins. The majority of AMD would be considered high-strength due to metal concentrations and acidity orders of magnitude greater than typical AMD. Discharges from both operating and abandoned portals as well as tailings-related deposits displayed a high degree of heterogeneity with total metal concentrations ranging from 0.11 to 7480, <0.022 to 889, <0.0006 to 65.3, <0.001 to 310, 0.12 to 72,100, 0.3 to 402, <0.012 to 34.8, and 0.24 to 19,600 mg/L of Al, As, Cd, Cu, Fe, Mn, Pb and Zn, respectively. Net acidity and pH ranged from −10 to 246,000 mg/L as CaCO₃ equivalent and 0.90–6.94 standard units, respectively. Data were gathered during two sampling events centered around the most extreme periods of the dry and wet seasons of one water-year. Loadings to local streams were marginally greater for most metals in the wet season. If observed loadings are historically representative, Cerro Rico AMD has contributed thousands of tonnes of ecotoxic metals to the upper Rio Pilcomayo over the last five centuries. Metal and hydrogen ion concentrations in the majority of AMD sampled were several orders of magnitude above discharge limits set by the Bolivian government, yet no action has historically or contemporarily been taken.     

Occurrence and Distribution of Organic Contaminants in the Aquatic System in Berlin.Part II: Substituted Phenols in Berlin Surface Water

In a surface water screening, 30 representative surface water samples collected from rivers, canals, and lakes in Berlin were investigated for the presence of 22 substituted phenols. The phenols selected include the 11 phenols considered as “priority pollutants” by the US Environmental Protection Agency (US-EPA). Surface water samples were extracted applying solid-phase extraction with styrenedivinylbenzene adsorbent. The recoveries, determined in spiking experiments, were between 80 % and 103 %. After derivatization with N-(tert-butyldimethylsilyl)-N-methyl-trifluoroacetamide (MTBSTFA) the samples were analyzed by capillary gas chromatography-mass spectrometry (GC-MS). Phenol, cresols, 2-ethylphenol, 2-chlorophenol, 4-chloro-3-methylphenol, pentachlorophenol, 2-nitrophenol, and 4-nitrophenol were detected in the surface water samples at concentrations between 0.02 μg/L and 7.8 μg/L, respectively. The distribution of these residues in the Berlin surface waters showed that the phenolic residues, with the exception of pentachlorophenol and 2-ethylphenol, do not originate primarily from municipal sewage treatment plants discharges. Some of the phenols are formed naturally or occur as ubiquitous anthropogenic contaminants in the aquatic system.     

Improving the efficiency of ant algorithms using adaptive refinement: Application to storm water network design

The ant algorithm is a new evolutionary optimization method proposed for the solution of discrete combinatorial optimization problems. Many engineering optimization problems involve decision variables of continuous nature. Application of the ant algorithm to the optimization of these continuous problems requires discretization of the continuous search space, thereby reducing the underlying continuous problem to a discrete optimization problem. The level of discretization of the continuous search space, however, could present some problems. Generally, coarse discretization of the continuous design variables could adversely affect the quality of the final solution while finer discretization would enlarge the scale of the problem leading to higher computation cost and, occasionally, to low quality solutions. An adaptive refinement procedure is introduced in this paper as a remedy for the problem just outlined. The method is based on the idea of limiting the originally wide search space to a smaller one once a locally converged solution is obtained. The smaller search space is designed to contain the locally optimum solution at its center. The resulting search space is discretized and a completely new search is conducted to find a better solution. The procedure is continued until no improvement can be made by further refinement. The method is applied to a benchmark problem in storm water network design discipline and the results are compared with those of existing methods. The method is shown to be very effective and efficient regarding the optimality of the solution, and the convergence characteristics of the resulting ant algorithm. Furthermore, the method proves itself capable of finding an optimal, or near-optimal solution, independent of the discretization level and the size of the colony used.