Sedimentology of a subtidal,tide-dominated sand body in the Yellow Sea,southwest Korea

Odanam Satoe, a subtidal, tide-dominated sand body in the Yellow Sea, Korea, is linear in plan and asymmetrical in cross-section. It consists of fine- to medium-grained, well-sorted subangular sand. Bedforms consist of high-amplitude (1–2 m) sandwaves on the lower flanks of the gentler-sloping bar surface, and medium-amplitude (0.5-1 m) sandwaves on the sand body trough adjoining the steeper face, the bar crest and shallower parts of the gently sloping bar surface. Bedforms are absent on the relatively steeper bar surface, which is characterized by 2° slopes. Bedform orientation on the gentler slope is oblique by 30° to the bar crest, parallel to the sand-body crest on the crest itself, and opposite to the steeper sand-body face in the trough below the steeper slope of the bar.Bottom current velocity data show that tidal currents are semi-rotary with a flood time—velocity asymmetry over the gentler slope, and ebb time—velocity asymmetry over the steeper slope during most of the tidal cycle. Tidal-current flow parallels bar elongation over the steeper slope, whereas over the gentler slope, tidal-current flow is directed at 30° to the bar crest and changes to normal to the crest one hour prior to low tide. Bedform orientation mapped with side-scan sonar shows agreement with these flow directions.Sand dispersal around the sand body is controlled by time—velocity asymmetry and partial rotary flow directions of tidal currents. This circulation causes not only a trapezoidal mode of grain dispersal, but also westerly migration of the sand body documented from comparative bathymetric surveys in 1964 and 1980.     

Palaeomagnetism of the Foyers and Strontian granites,Scotland

Palaeomagnetic data from the “newer granites” of Foyers and Strontian show similar directions of magnetization with southerly declinations and horizontal to intermediate, mostly downward dipping, inclinations. These palaeomagnetic directions which accord with previous data from the Helmsdale granite are thought to be of Siluro-Devonian age. The present results are not sufficiently precise to justify discussion of possible lateral displacements along the Great Glen Fault of the order of a few hundred kilometres, but it is clear that the recent idea of a c. 15–20° latitudinal offset along the Fault in the Carboniferous has to be disregarded.     

Toxicity of tributyltin in the marine mollusc Mytilus edulis

Our previous studies have demonstrated that tributyltin (TBT) is genotoxic to the early life stages of marine mussels and worms. Here, the toxicity of TBT to adult organisms was determined using a suite of biomarkers designed to detect cytotoxic, immunotoxic and genotoxic effects. Exposure of adult mussels, Mytilus edulis, to environmentally realistic concentrations of TBTO for 7 days resulted in a statistically significant decrease in cell viability at concentrations of 0.5 μg/l and above. TBT had no effect on phagocytic activity or antioxidant capacity (FRAP assay). There was a statistically significant increase in DNA damage detected using the comet and micronucleus assays between the controls and 0.5, 1 and 5 μg/l of TBTO (P > 0.0005). Furthermore there was a strong correlation between DNA strand breaks (comet assay) and formation of micronuclei (P = 0.0005; R² = 61.5%). Possible mechanisms by which TBT could damage DNA either directly or indirectly are discussed including the possibility that TBT is genotoxic due to its ability to disrupt calcium homeostasis.     

Field Investigation of a New Recharge Approach for ASR Projects in Near‐Surface Aquifers

Aquifer storage and recovery (ASR) is the artificial recharge and temporary storage of water in an aquifer when water is abundant, and recovery of all or a portion of that water when it is needed. One key limiting factor that still hinders the effectiveness of ASR is the high costs of constructing, maintaining, and operating the artificial recharge systems. Here we investigate a new recharge method for ASR in near‐surface unconsolidated aquifers that uses small‐diameter, low‐cost wells installed with direct‐push (DP) technology. The effectiveness of a DP well for ASR recharge is compared with that of a surface infiltration basin at a field site in north‐central Kansas. The performance of the surface basin was poor at the site due to the presence of a shallow continuous clay layer, identified with DP profiling methods, that constrained the downward movement of infiltrated water and significantly reduced the basin recharge capacity. The DP well penetrated through this clay layer and was able to recharge water by gravity alone at a much higher rate. Most importantly, the costs of the DP well, including both the construction and land costs, were only a small fraction of those for the infiltration basin. This low‐cost approach could significantly expand the applicability of ASR as a water resources management tool to entities with limited fiscal resources, such as many small municipalities and rural communities. The results of this investigation demonstrate the great potential of DP wells as a new recharge option for ASR projects in near‐surface unconsolidated aquifers.     

An Efficient Numerical Method for Computing Synthetic Seismograms for a Layered Half-space with Sources and Receivers at Close or Same Depths

— It is difficult to compute synthetic seismograms for a layered half-space with sources and receivers at close to or the same depths using the generalized R/T coefficient method (Kennett, 1983; Luco and Apsel, 1983; Yao and Harkrider, 1983; Chen, 1993), because the wavenumber integration converges very slowly. A semi-analytic method for accelerating the convergence, in which part of the integration is implemented analytically, was adopted by some authors (Apsel and Luco, 1983; Hisada, 1994, 1995). In this study, based on the principle of the Repeated Averaging Method (Dahlquist and Björck, 1974; Chang, 1988), we propose an alternative, efficient, numerical method, the peak-trough averaging method (PTAM), to overcome the difficulty mentioned above. Compared with the semi-analytic method, PTAM is not only much simpler mathematically and easier to implement in practice, but also more efficient. Using numerical examples, we illustrate the validity, accuracy and efficiency of the new method.     

Modelling interactions between fold–thrust belt deformation, foreland flexure and surface mass transport

Interactions between fold and thrust belt deformation, foreland flexure and surface mass transport are investigated using a newly developed mathematical model incorporating fully dynamic coupling between mechanics and surface processes. The mechanical model is two dimensional (plane strain) and includes an elasto‐visco‐plastic rheology. The evolving model is flexurally compensated using an elastic beam formulation. Erosion and deposition at the surface are treated in a simple manner using a linear diffusion equation. The model is solved with the finite element method using a Lagrangian scheme with marker particles. Because the model is particle based, it enables straightforward tracking of stratigraphy and exhumation paths and it can sustain very large strain. It is thus ideally suited to study deformation, erosion and sedimentation in fold–thrust belts and foreland basins. The model is used to investigate how fold–thrust deformation and foreland basin development is influenced by the non‐dimensional parameter , which can be interpreted as the ratio of the deformation time scale to the time scale for surface processes. Large values of imply that the rate of surface mass transport is significantly greater than the rate of deformation. When , the rates of surface processes are so slow that one observes a classic propagating fold–thrust belt with well‐developed wedge top basins and a largely underfilled foreland flexural depression. Increasing causes (1) deposition to shift progressively from the wedge top into the foredeep, which deepens and may eventually become filled, (2) widespread exhumation of the fold–thrust belt, (3) reduced rates of frontal thrust propagation and possible attainment of a steady‐state orogen width and (4) change in the style and dynamics of deformation. Together, these effects indicate that erosion and sedimentation, rather than passively responding to tectonics, play an active and dynamic role in the development of fold–thrust belts and foreland basins. Results demonstrate that regional differences in the relative rates of surface processes (e.g. because of different climatic settings) may lead to fold–thrust belts and foreland basins with markedly different characteristics. Results also imply that variations in the efficiency of surface processes through time (e.g., because of climate change or the emergence of orogens above sea level) may cause major temporal changes in orogen and basin dynamics.     

Sediment modelling with fine temporal and spatial resolution for a hilly catchment

The suitability of the physically based model SHETRAN for simulating sediment generation and delivery with a high degree of spatial (20 m) and temporal (sub‐hourly) resolution was assessed through application of the model to a 167‐km² catchment leading to an estuary in New Zealand. By subdividing the catchment and conducting calculations on a computer cluster for a 6‐month hydrology initialisation period, it was possible to simulate a large rainfall event and its antecedent conditions in 24 h of computation time. The model was calibrated satisfactorily to catchment outlet flow and sediment flux for a large rainfall event in two subcatchments (~2 km²). Validation for a separate subcatchment was successful for flow (Nash–Sutcliff efficiency of 0.84) with a factor 2.1 over‐prediction for sediment load. Validation for sediment at full catchment scale using parameters from the subcatchment scale was good for flow but poor for sediment, with gross under‐estimation of the dominant stream sources of sediment. After recalibration at catchment scale, validation for a separate event gave good results for flow (Nash–Sutcliff efficiency of 0.93) and sediment load within a factor of two of measurements. An exploratory spatially explicit landslide model was added to SHETRAN, but it was not possible to test this fully because no landslides were observed in the study period. Application to climate change highlighted the non‐linear response to extreme rainfall. However, full exploration of land use and climate change and the evaluation of uncertainty were severely constrained by computational limitations. Subdivision of the catchment with separate stream routing is suggested as a way forward to overcome these limitations. Copyright © 2011 John Wiley & Sons, Ltd.     

Approximation approach to the SRM based on root decomposition in the simulation of spatially varying ground motions

The spectral representation method(SRM) is widely used to simulate spatially varying ground motions.This study focuses on the approximation approach to the SRM based on root decomposition,which can improve the efficiency of the simulation.The accuracy of the approximation approach may be affected by three factors: matrix for decomposition,distribution of frequency interpolation nodes and elements for interpolation.The influence of these factors on the accuracy of this approach is examined and the following conclusions are drawn.The SRM based on the root decomposition of the lagged coherency matrix exhibits greater accuracy than the SRM based on the root decomposition of the cross spectral matrix.The equal energy distribution of frequency interpolation nodes proposed in this study is more effective than the counter pith with an equal spacing.Elements for interpolation do not have much of an effect on the accuracy,so interpolation of the elements of the decomposed matrix is recommended because it is less complicated from a computational efficiency perspective.