Capture-zone design in an aquifer influenced by cyclic fluctuations in hydraulic gradients

Design of a groundwater pumping and treatment system for a wood-treatment facility adjacent to the tidally influenced Fraser River estuary required the development of methodologies to account for cyclic variations in hydraulic gradients. Design of such systems must consider the effects of these cyclic fluctuations on the capture of dissolved-phase contaminants. When the period of the cyclic fluctuation is much less than the travel time of the dissolved contaminant from the source to the discharge point, the hydraulic-gradient variations resulting from these cycles can be ignored. Capture zones are then designed based on the average hydraulic gradient determined using filter techniques on continuous groundwater-level measurements. When the period of cyclic fluctuation in hydraulic gradient is near to or greater than the contaminant travel time, the resulting hydraulic-gradient variations cannot be ignored. In these instances, procedures are developed to account for these fluctuations in the capture-zone design. These include proper characterization of the groundwater regime, assessment of the average travel time and period of the cyclic fluctuations, and numerical techniques which allow accounting for the cyclic fluctuations in the design of the capture zone. Electronic Publication     

Incorporation of Cr<Superscript>3+</Superscript> in dickite: a spectroscopic study

 We have investigated a well-ordered sample of natural Cr-bearing dickite from Nowa Ruda (Lower Silesia, Poland) using electron paramagnetic resonance (EPR) at X- and Q-band frequencies (9.42 and 33.97 GHz, respectively) and optical diffuse reflectance spectroscopy. The observation of the spin-forbidden transitions at 15500 and 14690 cm⁻¹ allows us to unambiguously identify the major contribution of octahedrally coordinated Cr³⁺ ions in the optical spectrum. The X- and Q-band EPR spectra show two superposed Cr³⁺ signals. The corresponding fine-structure parameters were determined at room temperature and 145 K. These results suggest the substitution of Cr³⁺ for Al³⁺ in equal proportions in the two unequivalent octahedral sites of the dickite structure. In kaolin group minerals, the distortion around Cr³⁺ ions (λ≈ 0.2–0.4) in Al sites is significantly less rhombic than that observed around Fe³⁺ ions (λ≈ 0.6–0.8). Received: 29 June 2001 / Accepted: 22 October 2001     

Uniting space, ground, and underwater measurements for improved estimates of rain rate

Global precipitation is monitored from a variety of platforms including spaceborne, ground-, and ocean-based platforms. Intercomparisons of these observations are crucial to validating the measurements and providing confidence for each measurement technique. Probability distribution functions of rain rates are used to compare satellite and ground-based radar observations. A preferred adjustment technique for improving rain rate distribution estimates is identified using measurements from ground-based radar and rain gauges within the coverage area of the radar. The underwater measurement of rainfall shows similarities to radar measurements, but with intermediate spatial resolution and high temporal resolution. Reconciling these different measurement techniques provides understanding and confidence for all of the methods.     

The influence of floodplain geohydrology on the distribution of Sarcocornia pillansii in the Olifants Estuary on the West Coast, South Africa

The distribution of Sarcocornia pillansii (Moss) A.J. Scott was determined by water-table depth and electrical conductivity (EC) of the groundwater. Where the groundwater was accessible (<1.5 m) and had a low EC (<80 mS cm⁻¹), S. pillansii extended its roots down to the water-table where a suitable water potential gradient was shown to exist between the soil and roots. In areas where the groundwater was too deep and/or hypersaline, the plants grew on hummocks. The unconfined aquifer below the floodplain is linked to the estuary and although diurnal tidal waves were dampened, water-table level fluctuations were recorded between tidal events. The complex geomorphology of the floodplain influences groundwater flow, in turn affecting the distribution of the salt marsh vegetation.     

Native and artificial radiation-induced defects in montmorillonite. An EPR study

A natural montmorillonite containing radiation-induced defects was studied with Electron Paramagnetic Resonance (EPR) spectroscopy (X- and Q-band). A first dominant native defect, namely native defect 1, is identified. It gives rise to an orthorhombic spectrum with g_x= 2.004 ± 0.005 g_y= 2.010 ± 0.003, g_z= 2.065 ± 0.002. Simulation of the EPR spectrum at X- and Q-band reveals a second native defect with isotropic spectrum at g= 2.019 ± 0.005. Both are electron holes trapped on oxygen atoms of the structure. The native defect 1 is located on an oxygen-silicon bond or a non-bonding orbital parallel to the c* axis. These defects are annealed at 500°C and the half-life determined for native defect 1 is circa 3,000 years. Irradiations with beta rays produced two additional hole centers of lower stability and distinct EPR parameters. Artificial irradiations show that montmorillonite can be used as a dosimeter in a large dose range.     

External controls on the distribution,fabrics and mineralization of modern microbial mats in a coastal hypersaline lagoon,Cayo Coco (Cuba)

Active, carbonate‐mineralizing microbial mats flourish in a tropical, highly evaporative, marine‐fed lagoonal network to the south of Cayo Coco Island (Cuba). Hypersaline conditions support the development of a complex sedimentary microbial ecosystem with diverse morphologies, a variable intensity of mineralization and a potential for preservation. In this study, the role of intrinsic (i.e. microbial) and extrinsic (i.e. physicochemical) controls on microbial mat development, mineralization and preservation was investigated. The network consists of lagoons, forming in the interdune depressions of a Pleistocene aeolian substratum; they developed due to a progressive increase in sea‐level since the Holocene. The hydrological budget in the Cayo Coco lagoonal network changes from west to east, increasing the salinity. This change progressively excludes grazers and increases the saturation index of carbonate minerals, favouring the development and mineralization of microbial mats in the easternmost lagoons. Detailed mapping of the easternmost lagoon shows four zones with different flooding regimes. The microbial activity in the mats was recorded using light–dark shifts in conjunction with microelectrode O₂ and HS^? profiles. High rates of O₂ production and consumption, in addition to substantial amounts of exopolymeric substances, are indicative of a potentially strong intrinsic control on mineralization. Seasonal, climate‐driven water fluctuations are key for mat development, mineralization, morphology and distribution. Microbial mats show no mineralization in the permanently submersed zone, and moderate mineralization in zones with alternating immersion and exposure. It is suggested that mineralization is also driven by water‐level fluctuations and evaporation. Mineralized mats are laminated and consist of alternating trapping and binding of grains and microbially induced magnesium calcite and dolomite precipitation. The macrofabrics of the mats evolve from early colonizing Flat mats to complex Cerebroid or Terrace structures. The macrofabrics are influenced by the hydrodynamic regime: wind‐driven waves inducing relief terraces in windward areas and flat morphologies on the leeward side of the lagoon. Other external drivers include: (i) storm events that either promote (for example, by bioclasts covering) or prevent (for example, by causing erosion) microbial mat preservation; and (ii) subsurface degassing, through mangrove roots and desiccation cracks covered by Flat mats (i.e. forming Hemispheroids and Cerebroidal structures). These findings provide in‐depth insights into understanding fossil microbialite morphologies that formed in lagoonal settings.     

Stratigraphic modelling of platform architecture and carbonate production: a Messinian case study (Sorbas Basin,SE Spain)

The late Messinian mixed carbonate‐siliciclastic platforms of the Sorbas Basin, known as the Terminal Carbonate Complex, record significant changes in carbonate production and geometry. Their facies and stratigraphic architecture result from complex interactions between base‐level fluctuations, evaporite deformation/dissolution and detrital inputs. A 3D quantitative approach (with DIONISOS software) is used to explore the basin‐scale platform architecture and to quantify the carbonate production of the Terminal Carbonate Complex. The modelling strategy consists in integrating detailed 2D field‐based transects and modern carbonate system parameters (e.g. carbonate production rates, bathymetric and hydrodynamic ranges of production). This approach limits user impact and so provides more objective output results. Tests are carried out on carbonate production rates, subsidence and evaporite deformation/dissolution. Numerical modelling provides accurate predictions of geometries, facies distributions and depositional sequence thicknesses, validated by field data. Comparative statistical testing of the field transects and of the various model outputs are used to discern the relative contribution of the parameters tested to the evolution of basin filling. The 3D visualization and quantification of the main carbonate producers (ooids and microbialites) are discussed in terms of changes in base‐level and detrital supply. This study demonstrates that base‐level fluctuations have the greatest impact on the carbonate budget. Evaporite deformation/dissolution affects the type and amount of carbonate production, inducing a transition from an ooid‐ to microbialite‐dominated system and also has a major effect on stratigraphic architecture by inducing the migration of depocentres. The numerical modelling results obtained using modern carbonate system parameters could also be applied to subsurface ooid‐microbialite reservoirs, and the Terminal Carbonate Complex is a good analogue for such systems.     

A review of jet grouting practice and development

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.     

Assessing the potential of reservoir outflow management to reduce sedimentation using continuous turbidity monitoring and reservoir modelling

In‐stream sensors are increasingly deployed as part of ambient water quality‐monitoring networks. Temporally dense data from these networks can be used to better understand the transport of constituents through streams, lakes or reservoirs. Data from existing, continuously recording in‐stream flow and water quality monitoring stations were coupled with the two‐dimensional hydrodynamic CE‐QUAL‐W2 model to assess the potential of altered reservoir outflow management to reduce sediment trapping in John Redmond Reservoir, located in east‐central Kansas. Monitoring stations upstream and downstream from the reservoir were used to estimate 5.6 million metric tons of sediment transported to John Redmond Reservoir from 2007 through 2010, 88% of which was trapped within the reservoir. The two‐dimensional model was used to estimate the residence time of 55 equal‐volume releases from the reservoir; sediment trapping for these releases varied from 48% to 97%. Smaller trapping efficiencies were observed when the reservoir was maintained near the normal operating capacity (relative to higher flood pool levels) and when average residence times were relatively short. An idealized, alternative outflow management scenario was constructed, which minimized reservoir elevations and the length of time water was in the reservoir, while continuing to meet downstream flood control end points identified in the reservoir water control manual. The alternative scenario is projected to reduce sediment trapping in the reservoir by approximately 3%, preventing approximately 45 000 metric tons of sediment from being deposited within the reservoir annually. This article presents an approach to quantify the potential of reservoir management using existing in‐stream data; actual management decisions need to consider the effects on other reservoir benefits, such as downstream flood control and aquatic life. Copyright © 2012 John Wiley & Sons, Ltd.