大别山造山带中球颗结构玄武质安山岩的报道

作者在大别山碰撞造山带首次发现了球颗结构的玄武质安山岩,位于安徽省宿松县趾凤河乡吴家河村。此球颗结构与滇中前寒武纪昆阳群(冯贤仁,1980)和雅鲁藏布江蛇绿岩带(邓万明面告)中的球颗玄武岩的球颗结构一致,但化学分析结果表明为玄武质安山岩。     

钛（Ⅳ）的反相萃取柱色层新体系研究及应用

本文研究了以ｃＨＣｌ＝８ｍｏｌ·Ｌ－１盐酸为移动相，以聚四氟乙烯负载的钽试剂－ＣＨＣｌ３为固定相反相萃取层析钛（Ⅳ）的新体系，柱上层析的钛用ｃＨＣｌ＝３ｍｏｌ·Ｌ－１盐酸洗脱后经二安替比林甲烷光度法测定，不仅钛回收率可达１００％，并可使钛（Ⅳ）与多种离子分离。能用于矿物岩石类复杂样品及其他物质中钛的分离富集与测定，方法简便快速。     

冲积沉积构型单元分析法——原理及其适用性

通过对构型单元分析法原理和构型单元界面定义的回顾并结合对延长组的研究，发现构型单元分析法适用于以冲积作用为主要沉积物搬运方式的沉积地层。对岩性呈渐变过程、界面类型单一、界面级别难以确定、成岩改造强烈、同沉积变形发育以及底辟作用强烈的地层，不宜使用构型单元分析法。在河口湾、潮间带和河流三角洲前缘环境中形成的沉积体也不适合进行构型单元分析。     

Gold concentration from well water by the hydroelectrical extraction method

An experimental survey of the gold concentrated from well water by a hydroelectrical extraction (HEE) method has been carried out in the famous Au metallogenic province in the eastern part of Shandong Province in northeastern China. This method is based on the existence of ionic Au in groundwater around ore bodies. Under the action of an external electric field, ionic Au migrates toward the cathode where the metal is absorbed by a special absorbent attached to the cathode. Promising areas for further exploration can be evaluated from the amount of Au in the absorbent.Distinct Au anomalies were discovered by the experimental survey. The results from the follow-up study of some of these anomalies have shown that most of them are related to the known placer Au deposits and to the primary Au occurrences. However, two new Au prospects and several new Au sources have been found which offer new targets for Au hunting in the area.The hydroelectrical extraction method is an effective technique of looking for Au in areas covered with transported overburden. Since the Au in well water can be concentrated on the cathode with the absorbent, the sensitivity requirement for Au analysis could be reduced. The method also provides a useful tool for the exploration of blind placer Au.     

Strain partitioning and deformation mode analysis of the normal faults at Red Mountain, Birmingham, Alabama

In a low-temperature environment, the thin-section scale rock-deformation mode is primarily a function of confining pressure and total strain at geological strain rates. A deformation mode diagram is constructed from published experimental data by plotting the deformation mode on a graph of total strain versus the confining pressure. Four deformation modes are shown on the diagram: extensional fracturing, mesoscopic faulting, incipient faulting, and uniform flow. By determining the total strain and the deformation mode of a naturally deformed sample, the confining pressure and hence the depth at which the rock was deformed can be evaluated. The method is applied to normal faults exposed on the gently dipping southeast limb of the Birmingham anticlinorium in the Red Mountain expressway cut in Birmingham, Alabama. Samples of the Ordovician Chickamauga Limestone within and adjacent to the faults contain brittle structures, including mesoscopic faults and veins, and ductile deformation features including calcite twins, intergranular and transgranular pressure solution, and deformed burrows. During compaction, a vertical shortening of about 45 to 80% in shale is indicated by deformed burrows and relative compaction of shale to burrows, about 6% in limestone by stylolites. The normal faults formed after the Ordovician rocks were consolidated because the faults and associated veins truncate the deformed burrows and stylolites, which truncate the calcite cement. A total strain of 2.0% was caused by mesoscopic faults during normal faulting. A later homogenous deformation, indicated by the calcite twins in veins, cement and fossil fragments, has its major principal shortening strain in the dip direction at a low angle (about 22°) to bedding. The strain magnitude is about 2.6%. By locating the observed data on the deformation mode diagram, it is found that the normal faulting characterized by brittle deformation occurred under low confining pressure (< 18 MPa) at shallow depth (< 800 m), and the homogenous horizontal compression characterized by uniform flow occurred under higher confining pressure (at least 60 MPa) at greater depth (> 2.5 km).     

季节性冻结滞水促滑效应——滑坡发育的一种新因素

在综合分析西北季节性冻土地区滑坡发生时间规律和危险斜坡变形动态规律的基础上，提出季节性冻融作用产生的冻结滞水效应可使斜坡区地下水富集，土体软化范围扩大瞌 水压力增大，是本区滑坡发育的一种重要外动力因素，并对其作用机理和发生条件进行了论述。     

含水层中海水入侵的数学模型

提出了考虑过渡带的适合潜水含水层和承压含水层的海水入侵数学模型,导出了相应的方程和定解条件.经实例验证,模型是合理和可靠的.     

南江县铁炉坝地区含金丰度及金矿化围岩蚀变特征

对四川省南江县铁炉坝地区各类岩石和土壤的含金丰度进行了阐述，对金矿化的围岩蚀变特征进行了较详细的论述，指出黄铁矿化一电气石化-硅化的蚀变组合是该区金成矿的指示性标志。     

Prediction of Floor Water Inrush: The Application of GIS-Based AHP Vulnerable Index Method to Donghuantuo Coal Mine,China

Floor water inrush represents a geohazard that can pose significant threat to safe operations for instance in coal mines in China and elsewhere. Its occurrence is controlled by many factors, and the processes are often not amenable to mathematical expressions. To evaluate the water inrush risk, the paper proposes the vulnerability index approach by coupling the analytic hierarchy process (AHP) and geographic information system (GIS). The detailed procedures of using this innovative approach are shown in a case study in China (Donghuantuo Coal Mine). The powerful spatial data analysis functions of GIS was used to establish the thematic layer of each of the six factors that control the water inrush, and the contribution weights of each factor was determined with the AHP method. The established AHP evaluation model was used to determine the threshold value for each risk level with a histogram of the water inrush vulnerability index. As a result, the mine area was divided into five regions with different vulnerability levels which served as general guidelines for the mine operations. The prediction results were further corroborated with the actual mining data, and the evaluation result is satisfactory.     

福建福清核电厂厂址地基岩土工程评价

根据福清市核电厂候选厂址区花岗岩体微风化和中风化层结构的特征,节理裂隙统计,结合声波测试和室内岩石单轴抗压强度、变形试验、三轴压缩试验等测试数据,评价核电厂地基岩体的适宜性。