Fluidization of buried mass-wasting deposits in lake sediments and its relevance for paleoseismology: Results from a reflection seismic study of lakes Villarrica and Calafquén (South-Central Chile)

A dense grid of very-high resolution seismic profiles on Lake Villarrica provides a quasi-3D view on intercalated lenses of low-amplitude reflections, which are connected by acoustic wipe-out patches and fractures to an underlying voluminous mass-wasting deposit. The lenses are interpreted as being created by earthquake-triggered liquefaction in this buried mass-wasting deposit and subsequent sediment fluidization and extrusion at the paleo-lake bottom. These sediment volcanoes are mapped in detail. They have a rather uniform circular geometry and show a linear relationship between apparent width and maximum thickness on a seismic section. The largest sediment volcanoes are up to 80 m wide and 1.9 m thick. Their slope angles designate a syn- to post-depositional sagging of most sediment volcanoes. Sediment volcano detection and mapping from nearby Lake Calafquén further strengthen the revealed geometrical relationships. Locally, some of the sediment/fluid escape structures extend to a higher position in the stratigraphy, which points to a polyphase escape process associated with multiple multi-century spaced strong earthquakes. Thickness and morphology of the source layer seem to exert a dominant control in the production of sediment/fluid extrusions. This study shows that reflection seismic profiling allowed recognizing 4 different seismic events in the studied stratigraphic interval, which are evidenced by mass-wasting deposits and/or fluidization features.     

Local traditions as a means for commercial production of historical beers: The case of Vossaøl,Norway

The aim of the article is to analyse challenges facing the commercial production of historical beers, which are ‘extinct’ beers. The concept of ‘fictive terroir’ is introduced to emphasize these challenges. The author addresses the following questions: What kind of knowledge is needed to produce historical beers? How can this knowledge be acquired? How can it be used commercially in craft breweries? The studied case is Vossaøl, a craft beer imitation of a beer produced in the early 19th century. The data were obtained from written sources and interviews with local home brewers and brewers at Voss Brewery in Norway. The study revealed the need to reconstruct the terroir in the early 19th century. Additionally, Voss Brewery had to acquire knowledge about how to process and combine the ingredients, which included the traditional yeast (kveik). Involving traditional home brewers was crucial to determine how ingredients could be combined to produce Vossaøl. The author concludes that a synthetic knowledge base was a useful point of departure in this respect. Participation in the traditional culture of brewing proved an important means when working with this knowledge base. The results are interesting in the broader context of the reconstruction of beverages and food.     

Lithologische Studien und zyklische Sedimentation in der helvetischen Zone der Schweizeralpen

Ohne Zusammenfassung     

Bücher- und Zeitschriftenschau

Ohne Zusammenfassung     

Real-time envelope cross-correlation detector: application to induced seismicity in the Insheim and Landau deep geothermal reservoirs

We develop and test a real-time envelope cross-correlation detector for use in seismic response plans to mitigate hazard of induced seismicity. The incoming seismological data are cross-correlated in real-time with a set of previously recorded master events. For robustness against small changes in the earthquake source locations or in the focal mechanisms we cross-correlate the envelopes of the seismograms rather than the seismograms themselves. Two sequenced detection conditions are implemented: After passing a single trace cross-correlation condition, a network cross-correlation is calculated taking amplitude ratios between stations into account. Besides detecting the earthquake and assigning it to the respective reservoir, real-time magnitudes are important for seismic response plans. We estimate the magnitudes of induced microseismicity using the relative amplitudes between master event and detected event. The real-time detector is implemented as a SeisComP3 module. We carry out offline and online performance tests using seismic monitoring data of the Insheim and Landau geothermal power plants (Upper Rhine Graben, Germany), also including blasts from a nearby quarry. The comparison of the automatic real-time catalogue with a manually processed catalogue shows, that with the implemented parameters events are always correctly assigned to the respective reservoir (4 km distance between reservoirs) or the quarry (8 km and 10 km distance, respectively, from the reservoirs). The real-time catalogue achieves a magnitude of completeness around 0.0. Four per cent of the events assigned to the Insheim reservoir and zero per cent of the Landau events are misdetections. All wrong detections are local tectonic events, whereas none are caused by seismic noise.     

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.     

Prograded foredunes of Western Australia's macro‐tidal coast – implications for Holocene sea‐level change and high‐energy wave impacts

The Holocene evolution of the Canning Coast of Western Australia has largely been overlooked so far mainly due to its remoteness and low population density. We report on new data from a sequence of foredunes inside the macro‐tidal Admiral Bay, 110 km southwest of Broome. Based on sediment cores, differential global positioning system (dGPS)‐based elevation transects, and stratigraphical analyses on outcrops of the relict foredunes, we aim at reconstructing Holocene coastal changes and relative sea levels (RSLs), as well as identifying and dating imprints of extreme‐wave events. Sedimentary analyses comprise the documentation of bedding structures, foraminiferal content and macrofaunal remains, grain size distribution, and organic matter. The chronological framework is based on 26 carbon‐14 accelerator mass spectrometry (¹⁴C‐AMS) datings. Marine flooding of the pre‐Holocene surface landward of the 2.5 km‐wide foredune barriers occurred 7400–7200 cal bp , when mangroves colonized the area. After only 200–400 years, a high‐energy inter‐tidal environment established and prevailed until c. 4000 cal bp , before turning into the present supralittoral mudflat. During that time, coastal regression led to beach progradation and the formation of aligned foredunes. Drivers of progradation were a stable RSL or gradual RSL fall after the mid‐Holocene and a positive sand budget. The foredunes overlie upper beach deposits located up to >2 m above the present upper beach level and provide evidence for a higher mid‐Holocene RSL. Discontinuous layers of coarse shells and sand are intercalated in the foredunes, indicating massive coastal flooding events. One such layer was traced over three dune ridges and dated to c. 1700–1550 cal bp . However, it seems that most tropical cyclones induce net erosion rather than deposition at aligned foredunes and thus, they are only suitable for reconstructing temporal variability if erosional features or sedimentation reliably tied to these events can be identified and dated accurately. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparing a seismic hazard model for Switzerland: the view from PEGASOS Expert Group 3 (EG1c)

The seismic hazard model used in the PEGASOS project for assessing earth-quake hazard at four NPP sites was a composite of four sub-models, each produced by a team of three experts. In this paper, one of these models is described in detail by the authors. A criticism sometimes levelled at probabilistic seismic hazard studies is that the process by which seismic source zones are arrived at is obscure, subjective and inconsistent. Here, we attempt to recount the stages by which the model evolved, and the decisions made along the way. In particular, a macro-to-micro approach was used, in which three main stages can be described. The first was the characterisation of the overall kinematic model, the “big picture” of regional seismogenesis. Secondly, this was refined to a more detailed seismotectonic model. Lastly, this was used as the basis of individual sources, for which parameters can be assessed. Some basic questions had also to be answered about aspects of the approach to modelling to be used: for instance, is spatial smoothing an appropriate tool to apply? Should individual fault sources be modelled in an intraplate environment? Also, the extent to which alternative modelling decisions should be expressed in a logic tree structure has to be considered.