山东枣庄杨家堡子铁矿床地质特征及成因探讨

杨家堡子铁矿位于山东省枣庄市峄城区峨山镇,隶属苍峄铁成矿带,矿体赋存于新太古代泰山岩群山草峪组上部的变质岩中。该矿床内圈定磁铁矿体11个,求得铁矿石(333)资源量3 378.2万t,矿床平均品位TFe 33.30%,mFe 22.64%。主矿体为Ⅲ-6矿体,占矿床总资源量的83.69%,其长度1 137 m,最大斜深1 065 m,埋深707~1 369m,形态复杂程度中等,品位变化属均匀类型。含矿岩石为磁铁石英角闪岩。矿石中的主要有用组分为Fe,伴生元素含量较低,均无综合回收利用价值,有害组分S、P的含量均较低,经选矿后可达到炼钢及炼铁要求。矿石结构主要有粒状变晶结构和柱状变晶结构;矿石的构造主要为条带状构造,块状构造的矿石较少,但品位相对较高。矿石自然类型为原生磁铁矿石,工业类型属需选磁性铁矿石。该矿床成因与苍峄铁矿一脉相承,为典型的BIF型铁矿。根据区内以及邻区的见矿情况结合磁异常特征分析,杨家堡子矿区有良好的找矿前景。     

聊城市土地利用存在的问题及对策

聊城市位于山东省西部,土地总面积8715km2,占全省总面积的5.6%。辖东昌府区、临清市和阳谷、莘县、茌平、东阿、冠县、高唐6县,有129个乡(街道办事处)、6486个行政村,全市总人口563.76万,其中农业人口为427.97万。根据聊城市“十五”计划及2010年国民经济和社会发展规划纲要,到     

汶川M_W7.9和集集M_W7.6地震前应力场转换现象及其可能的前兆意义

2008年四川汶川MW7.9地震和1999年台湾集集MW7.6地震均为挤压推覆构造环境条件下发生的板内逆断层型地震。本文对比分析了两次地震前的CMT解、震区附近的中小地震震源机制解及其反演的应力场可知,集集地震主震震源机制解与用台湾内陆中西部的CMT解反演得到逆断层类型构造应力场吻合,而震区附近中小地震具有随机发生的性质,反演得到了震前与构造应力场不一致的走向滑动类型的局部应力场,但当局部应力场变化到与构造应力场一致时,数月后发生主震;同样,用青藏高原东部的CMT解震源机制反演得到走向滑动类型的构造应力场,逆冲类型的汶川主震与构造应力场的压应力轴吻合,震区附近中小地震反演得到了与构造应力场一致的区域应力场,但震前局部应力场变化为逆冲类型应力场一致时,随即发生主震。说明逆断层型主震区附近随着震源区应力积累,在震前会出现相似的应力场转换现象,当最终转换到与发生主震的应力状态一致时,表明震源区附近应力已达到相当高的应力水平,是发生大地震的征兆,应引起进一步的关注。     

Mechanisms of Transient Postseismic Deformation Following the 2001 Mw 7.8 Kunlun (China) Earthquake

Using global positioning system (GPS) technology, significant postseismic surface displacements were observed within the first 4 months after the 2001 Mw 7.8 Kunlun earthquake which occurred in China. In this study, we investigated the mechanisms that may have possibly contributed to the postseismic deformations that have been observed. Based on the modeling results, we find that an afterslip model can interpret postseismic displacements in the near field even when the fault plane is extended to the bottom of the crust (~70 km). Models based on the viscoelastic relaxation theory showed a large discrepancy in the spatial pattern of the deformation compared with what has been observed. Thus, we infer that both mechanisms cannot interpret the observed postseismic deformation independently. A combination of afterslip and viscoelastic relaxation can further improve the data fit, especially at sites far from the fault. With maximum afterslip of ~0.4 m occurring at a depth of 10 km in the central section, the combined model shows that the estimated afterslip occurred mostly on and below the coseismic rupture plane, as well as on its eastern extension. The estimated moment released by the afterslip in the first 4 months is almost 40% of that released by the coseismic slip. The best-fitting viscoelastic relaxation model shows a “weak” upper mantle with a viscosity of ~1.0 × 10¹⁸ Pa s. The combined model also suggests the existence of a lower crust with viscosity larger than 1.0 × 10¹⁸ Pa s, although it cannot be constrained accurately.     

山东Ⅱ、Ⅲ类场地地震动峰值加速度放大效应分析

利用山东地区实测的Ⅱ类场地358个钻孔和Ⅲ类场地140个钻孔的地震动峰值加速度,计算了各个钻孔不同超越概率的土层地震动峰值加速度的放大系数ks,结果表明:(1)同类场地土层放大系数ks值总体符合正态分布,既有相对集中性,也有离散性;(2)随着基岩面输入地震动强度的增大,ks值降低,且Ⅲ类场地ks值降低较Ⅱ类的更为明显;(3)Ⅱ类场地随着基岩输入面埋深的增加,ks值呈增加趋势,约达20m深后基本趋于稳定,而Ⅲ类场地基岩输入面埋深的增加对ks值的影响不甚显著;(4)Ⅱ类场地50年超越概率10％的平均ks值(1.47)略高于《中国地震动参数区划图》使用的全国平均ks值.本文尝试讨论了山东地区Ⅱ、Ⅲ类场地不同强度基岩峰值加速度输入的ks调整值.     

Tectonic Features of the M_S8.0 Wenchuan Earthquake and Its Aftershocks

The M8.0 Wenchuan earthquake occurred on the Longmenshan fault zone. Based on field investigation of the surface rupture and focal mechanism study of the aftershocks, we discuss the geological relationship of the main, secondary and triggered ruptures. The main rupture is about 200km long and can be divided into the south part and the north part. The south part consists of two parallel fault zones characterized by reverse faulting, with several parallel secondary ruptures on the hanging wall of the main fault, and the north part is a single main fault zone characterized by lateral strike-slip and reverse faulting. Compared to a 300km long aftershock distribution, the surface rupture only occupies 200km, and the remaining 100km on the northeast of the main rupture was triggered by aftershocks. Study on the ruptures of this earthquake will be useful for studying the earthquake risk evolution on the Longmenshan fault system.     

贵州河流河水的锶同位素与喀斯特地区化学风化作用

贵州省地处世界岩溶发育最复杂、类型最齐全、分布面积最大的东亚岩溶区域中心, 也是我国碳酸盐岩分布面积最大、岩溶最发育的省区, 同时也是我国水土流失严重的地区之一。由于河水的地球化学反映了流域盆地的化学风化、气候和上地壳的化学组成的重要信息, 本工作对贵州喀斯特地区两条主要水系(乌江水系、沅江水系)河流的主要阴、阳离子和Sr2＋离子及锶同位素组成变化进行了系统研究, 对河水地球化学组成变化特征及其控制因素进行了解释。 贵州喀斯特地区两条主要水系河流的水化学组成代表了典型碳酸盐岩地区河流的相应化学组成, 显示了与世界主要河流不同的水化学特征, 反映了喀斯特环境地表化学风化作用的特点。     

Geochemistry of Subvolcanic-Type Copper-Silver Deposits in Eastern China

The metallogenesis of subvolcanic deposits is controlled by subvolcanic activities. The copper polymetallic deposits are genetically related to intermediate-acid rocks, and the silver polymetallic deposits are more closely related to acid rocks. The abundance of Cu is relatively high in the intermediate-acid rocks and subvolcanic rocks, whereas the abundances of Pb, An and Ag are high in acid rocks, indicating rich ore-forming elements in original magmas. The study of REEs shows that the magmatic type related to copper deposits is the syntectic type, and that related to silver polymetallic deposits is mainly the re-melting type. The deposits were formed under medium-low temperatures and low salinity. The metallogenic times were the late stage of the early Yanshanian or the late Yanshanian, dating 78-147 Ma.     

The δ60/58Ni Values of Twenty‐Six Selected Geological Reference Materials

The high‐precision δ^60/58Ni values of twenty‐six geological reference materials, including igneous rocks, sedimentary rocks, stream sediments, soils and plants are reported. The δ^60/58Ni values of all samples were determined by double‐spike MC‐ICP‐MS (Nu Plasma III). Isotope standard solution (NIST SRM 986) and geological reference materials (BHVO‐2, BCR‐2, JP‐1, PCC‐1, etc.) were used to evaluate the measurement bias and intermediate precision over a period of six months. Our results show that the intermediate precision of Ni isotope determination was 0.05‰ (2s, n = 69) for spiked NIST SRM 986 and typically 0.06‰ for actual samples, and the δ^60/58Ni _{NIST SRM 986} values were in excellent agreement with previous studies. Eighteen high‐precision Ni isotope ratios of geological reference materials are first reported here, and their δ^60/58Ni values varied from ?0.27‰ to 0.52‰, with a mean of 0.13 ± 0.34‰ (2s, n = 18). Additionally, SGR‐1b (0.56 ± 0.04‰, 2s), GSS‐1 (?0.27 ± 0.06‰, 2s), GSS‐7 (?0.11 ± 0.01‰, 2s), GSD‐10 (0.46 ± 0.06‰, 2s) and GSB‐12 (0.52 ± 0.06‰, 2s) could potentially serve as candidate reference materials for Ni isotope fractionation and comparison of Ni isotopic compositions among different laboratories.