Intensity measures for the seismic response of pile foundations

In this study the efficacy of various ground motion intensity measures for the seismic response of pile foundations embedded in liquefiable and non-liquefiable soils is investigated. A soil-pile-structure model consisting of a two-layer soil deposit with a single pile and a single degree-of-freedom superstructure is used in a parametric study to determine the salient features of the seismic response of the soil-pile-structure system. A suite of ground motion records scaled to various levels of intensity are used to investigate the full range of pile behaviour, from elastic response to failure. Various intensity measures are used to inspect their efficiency in predicting the seismic demand on the pile foundation for a given level of ground motion intensity. It is found that velocity-based intensity measures are the most efficient in predicting the pile response, which is measured in terms of maximum curvature or pile-head displacement. In particular, velocity spectrum intensity (VSI), which represents the integral of the pseudo-velocity spectrum over a wide period range, is found to be the most efficient intensity measure in predicting the seismic demands on the pile foundation. VSI is also found to be a sufficient intensity measure with respect to earthquake magnitude, source-to-site distance, and epsilon, and has a good predictability, thus making it a prime candidate for use in seismic response analysis of pile foundations.     

Particle suspensions and their regions of effect in the Neuse River Estuary: Implications for water quality monitoring

Monitoring of estuarine condition depends on water quality parameters that have significant and interpretable ecological effects and can be assessed either in situ or via rapid laboratory techniques. Two commonly measured parameters are water column turbidity (NTU) and total suspended solids (TSS). Under certain conditions, either of these measures could represent a proxy for runoff and provide rapid, in situ measures to improve protection of the public by decreasing the time required to detect and monitor associated effects (e.g., reduced water clarity and eutrophication). The Neuse River Estuary (NRE) has experienced a decline in water quality due to anthropogenic inputs, including stormwater containing nutrient and particle loads. Water samples were collected from the NRE during both dry weather and storm events over 16 mo across the entire estuarine gradient. Particle size distributions, ratio of particulate organic carbon to nitrogen, chlorophylla (chla), TSS, and NTU were measured in each of these samples, with the data separated into regions based on salinity and depth of sample collection. Particle analyses were directed at identifying suspensions dominated by phytoplankton, runoff particles, or resuspended sediments. Particle size distributions for suspensions in Region I (all samples with salinity less than 2) varied little during sampling, resulting in a robust NTU-TSS relationship. This relationship confirmed the usefulness of turbidity as a measure of runoff and resuspension of recently deposited runoff in the upper NRE. Phytoplankton cells represented a majority of the particles in Region II (surface samples with salinity greater than 2), based on the close relationship between chla and total particle volume in these samples. Suspensions of large, nearly uniform diameter particles, which are likely aggregates and resuspended sediment, were observed in Region III (bottom samples with salinity greater than 2). Using these techniques as part of routine monitoring, particle suspension measures in different hydrographic regions of an estuary provide evidence useful for identifying the source and water quality consequences of particle suspensions (e.g., microbial contamination and algal blooms).     

Physical and chemical characteristics of potential seal strata in regions considered for demonstrating geological saline CO<Subscript>2</Subscript> sequestration

Capture and geological sequestration of CO₂ from energy production is proposed to help mitigate climate change caused by anthropogenic emissions of CO₂ and other greenhouse gases. Performance goals set by the US Department of Energy for CO₂ storage permanence include retention of at least 99% of injected CO₂ which requires detailed assessments of each potential storage site’s geologic system, including reservoir(s) and seal(s). The objective of this study was to review relevant basin-wide physical and chemical characteristics of geological seals considered for saline reservoir CO₂ sequestration in the United States. Results showed that the seal strata can exhibit substantial heterogeneity in the composition, structural, and fluid transport characteristics on a basin scale. Analysis of available field and wellbore core data reveal several common inter-basin features of the seals, including the occurrence of quartz, dolomite, illite, calcite, and glauconite minerals along with structural features containing fractures, faults, and salt structures. In certain localities within the examined basins, some seal strata also serve as source rock for oil and gas production and can be subject to salt intrusions. The regional features identified in this study can help guide modeling, laboratory, and field studies needed to assess local seal performances within the examined basins.     

Back-arc rifting in the Izu-Bonin Island Arc: Structural evolution of Hachijo and Aoga Shima Rifts

Abstract Multi- and single-channel seismic profiles are used to investigate the structural evolution of back-arc rifting in the intra-oceanic Izu-Bonin Arc. Hachijo and Aoga Shima Rifts, located west of the Izu-Bonin frontal arc, are bounded along-strike by structural and volcanic highs west of Kurose Hole, North Aoga Shima Caldera and Myojin Sho arc volcanoes. Zig-zag and curvilinear faults subdivide the rifts longitudinally into an arc margin (AM), inner rift, outer rift and proto-remnant arc margin (PRA). Hachijo Rift is 65 km long and 20–40 km wide. Aoga Shima Rift is 70 km long and up to 45 km wide. Large-offset border fault zones, with convex and concave dip slopes and uplifted rift flanks, occur along the east (AM) side of the Hachijo Rift and along the west (PRA) side of the Aoga Shima Rift. No cross-rift structures are observed at the transfer zone between these two regions; differential strain may be accommodated by interdigitating rift-parallel faults rather than by strike- or oblique-slip faults. In the Aoga Shima Rift, a 12 km long flank uplift, facing the flank uplift of the PRA, extends northeast from beneath the Myojin Knoll Caldera. Fore-arc sedimentary sequences onlap this uplift creating an unconformity that constrains rift onset to ～1-2Ma. Estimates of extension (～3km) and inferred age suggest that these rifts are in the early syn-rift stage of back-arc formation. A two-stage evolution of early back-arc structural evolution is proposed: initially, half-graben form with synthetically faulted, structural rollovers (ramping side of the half-graben) dipping towards zig-zagging large-offset border fault zones. The half-graben asymmetry alternates sides along-strike. The present ‘full-graben’ stage is dominated by rift-parallel hanging wall collapse and by antithetic faulting that concentrates subsidence in an inner rift. Structurally controlled back-arc magmatism occurs within the rift and PRA during both stages. Significant complications to this simple model occur in the Aoga Shima Rift where the east-dipping half-graben dips away from the flank uplift along the PRA. A linear zone of weakness caused by the greater temperatures and crustal thickness along the arc volcanic line controls the initial locus of rifting. Rifts are better developed between the arc edifices; intrusions may be accommodating extensional strain adjacent to the arc volcanoes. Pre-existing structures have little influence on rift evolution; the rifts cut across large structural and volcanic highs west of the North Aoga Shima Caldera and Aoga Shima. Large, rift-elongate volcanic ridges, usually extruded within the most extended inner rift between arc volcanoes, may be the precursors of sea floor spreading. As extension continues, the fissure ridges may become spreading cells and propagate toward the ends of the rifts (adjacent to the arc volcanoes), eventually coalescing with those in adjacent rift basins to form a continuous spreading centre. Analysis of the rift fault patterns suggests an extension direction of N80°E ± 10° that is orthogonal to the trend of the active volcanic arc (N10°W). The zig-zag pattern of border faults may indicate orthorhombic fault formation in response to this extension. Elongation of arc volcanic constructs may also be developed along one set of the possible orthorhombic orientations. Border fault formation may modify the regional stress field locally within the rift basin resulting in the formation of rift-parallel faults and emplacement of rift-parallel volcanic ridges. The border faults dip 45–55° near the surface and the majority of the basin subsidence is accommodated by only a few of these faults. Distinct border fault reflections decreases dips to only 30° at 2.5 km below the sea floor (possibly flattening to near horizontal at 2.8 km although the overlying rollover geometry shows a deeper detachment) suggesting that these rifting structures may be detached at extremely shallow crustal levels.     

Biologically induced mineralization of dypingite by cyanobacteria from an alkaline wetland near Atlin,British Columbia,Canada

Background  

This study provides experimental evidence for biologically induced precipitation of magnesium carbonates, specifically dypingite (Mg₅(CO₃)₄(OH)₂·5H₂O), by cyanobacteria from an alkaline wetland near Atlin, British Columbia. This wetland is part of a larger hydromagnesite (Mg₅(CO₃)₄(OH)₂·4H₂O) playa. Abiotic and biotic processes for magnesium carbonate precipitation in this environment are compared.     

Assimilation of time-averaged observations in a quasi-geostrophic atmospheric jet model

The problem of reconstructing past climates from a sparse network of noisy time-averaged observations is considered with a novel ensemble Kalman filter approach. Results for a sparse network of 100 idealized observations for a quasi-geostrophic model of a jet interacting with a mountain reveal that, for a wide range of observation averaging times, analysis errors are reduced by about 50% relative to the control case without assimilation. Results are robust to changes to observational error, the number of observations, and an imperfect model. Specifically, analysis errors are reduced relative to the control case for observations having errors up to three times the climatological variance for a fixed 100-station network, and for networks consisting of ten or more stations when observational errors are fixed at one-third the climatological variance. In the limit of small numbers of observations, station location becomes critically important, motivating an optimally determined network. A network of fifteen optimally determined observations reduces analysis errors by 30% relative to the control, as compared to 50% for a randomly chosen network of 100 observations.     

Geophysical Survey and Archaeological Data at Masseria Grasso (Benevento,Italy)

The use of geophysical methods in metrology is a significant tool within the wide research topic of landscape archaeology context. Since 2011, the Ancient Appia Landscapes Project aims to recognize dynamics, shapes and layout of the ancient settlement located along the Appia road east of Benevento, and cyclical elements and human activities that influenced the choice of landscapes. The integration of geophysical data with an archaeological infra-site analysis allowed us to investigate the area of Masseria Grasso, about 6 km from Benevento (Campania region, Italy). In this framework, an archaeogeophysical approach (Geomagnetic and Ground Penetrating Radar) was adopted for detecting anomalies potentially correlated with buried archaeological evidences. The geomagnetic results have given a wide knowledge of buried features in a large survey highlighting significant anomalies associated with the presence of buildings, roads and open spaces. These geophysical results permitted us to define the first archaeological excavations and, successively, a detailed Ground Penetrating Radar approach has been provided highlighting the rooms and paved spaces. The overlap between archaeological dataset and geophysical surveys has also allowed recognizing the path of the ancient Appia road near the city of Benevento and hypothesize the settlement organization of the investigated area, which has been identified with the ancient Nuceriola.     

Potential for Coal-to-Liquids Conversion in the United States—Fischer–Tropsch Synthesis

The United States has the world’s largest coal reserves and Montana the highest potential for mega-mine development. Consequently, a large-scale effort to convert coal to liquids (CTL) has been proposed to create a major source of domestic transportation fuels from coal, and some prominent Montanans want to be at the center of that effort. We calculate that the energy efficiency of the best existing Fischer–Tropsch (FT) process applied to average coal in Montana is less than 1/2 of the corresponding efficiency of an average crude oil refining process. The resulting CO₂ emissions are 20 times (2000%) higher for CTL than for conventional petroleum products. One barrel of the FT fuel requires roughly 800 kg of coal and 800 kg of water. The minimum energy cost of subsurface CO₂ sequestration would be at least 40% of the FT fuel energy, essentially halving energy efficiency of the process. We argue therefore that CTL conversion is not the most valuable use for the coal, nor will it ever be, as long as it is economical to use natural gas for electric power generation. This finding results from the low efficiency inherent in FT synthesis, and is independent of the monumental FT plant construction costs, mine construction costs, acute lack of water, and the associated environmental impacts for Montana.

Flood‐driven topographic changes in a gravel‐cobble river over segment,reach, and morphological unit scales

Regulated rivers generally incise below dams that cut off sediment supply, but how that happens and what the consequences are at different spatial scales is poorly understood. Modern topographic mapping at meter‐scale resolution now enables investigation of the details of spatial processes. In this study, spatial segregation was applied to a meter‐scale raster map of topographic change from 1999 to 2008 on the gravel‐cobble, regulated lower Yuba River in California to answer specific scientific questions about how a decadal hydrograph that included a flood peak of 22 times bankfull discharge affected the river at segment, reach, and morphological unit scales. The results show that the river preferentially eroded sediment from floodplains compared to the channel, and this not only promoted valley‐wide sediment evacuation, but also facilitated the renewal and differentiation of morphological units, especially in the channel. At the reach scale, area of fill and mean net rate of elevational change were directly correlated with better connectivity between the channel and floodplain, while the mean rate of scour in scour areas was influenced by the ratio of slope to bankfull Froude number, a ratio indicative of lateral migration versus vertical downcutting. Hierarchical segregation of topographic change rasters proved useful for understanding multi‐scalar geomorphic dynamics. Copyright © 2016 John Wiley & Sons, Ltd.