Sedimentary dynamics along carbonate slopes (Bahamas archipelago)

Hydroacoustic and sedimentological data in the Santaren Channel covering both the leeward slope of Great Bahama Bank and the windward slope of Cay Sal Bank allow new insights into carbonate platform slope sedimentation. The data document the interplay between depositional and erosive processes on both slopes through time and provide information on the current regime and its influence on the slope sedimentary processes. This study emphasizes the diversity and complexity of the slope morphology and the sediment distribution of the youngest high‐frequency sequence, which has developed since the last glacial maximum. The processes triggering slope failures and the formation of channels and gullies differ on both slopes. At the leeward slope of the Great Bahama Bank, extensive slope failures occurred primarily during sea‐level lowering following an interglacial. These slope failures created a slope morphology that channelizes the exported platform sediments during the subsequent highstand. At the windward slope of Cay Sal Bank, contour currents and the local tectonic regime are responsible for slope failures. During sea‐level lowstands, downwelling induces turbidity currents. The interaction of turbidity and contour currents leads to the formation of a system of furrows and slope‐parallel sediment ridges. The discovered heterogeneities in slope sedimentation improve the understanding of carbonate slope sedimentation and provide implications for sequence stratigraphic interpretation of carbonate platform slopes.     

Two large earthquakes in western Switzerland in the sixteenth century: 1524 in Ardon (VS) and 1584 in Aigle (VD)

The Valais is the most seismically active region of Switzerland. Strong damaging events occurred in 1755, 1855, and 1946. Based on historical documents, we discuss two known damaging events in the sixteenth century: the 1524 Ardon and the 1584 Aigle earthquakes. For the 1524, a document describes damage in Ardon, Plan-Conthey, and Savièse, and a stone tablet at the new bell tower of the Ardon church confirms the reconstruction of the bell tower after the earthquake. Additionally, a significant construction activity in the Upper Valais churches during the second quarter of the sixteenth century is discussed that however cannot be clearly related to this event. The assessed moment magnitude Mw of the 1524 event is 5.8, with an error of about 0.5 units corresponding to one standard deviation. The epicenter is at 46.27 N, 7.27 E with a high uncertainty of about 50 km corresponding to one standard deviation. The assessed moment magnitude Mw of the 1584 main shock is 5.9, with an error of about 0.25 units corresponding to one standard deviation. The epicenter is at 46.33 N and 6.97 E with an uncertainty of about 25 km corresponding to one standard deviation. Exceptional movements in the Lake Geneva wreaked havoc along the shore of the Rhone delta. The large dimension of the induced damage can be explained by an expanded subaquatic slide with resultant tsunami and seiche in Lake Geneva. The strongest of the aftershocks occurred on March 14 with magnitude 5.4 and triggered a destructive landslide covering the villages Corbeyrier and Yvorne, VD.     

A Causality-guided Statistical Approach for Modeling Extreme Mei-yu Rainfall Based on Known Large-scale Modes——A Pilot Study

Extreme Mei-yu rainfall(MYR) can cause catastrophic impacts to the economic development and societal welfare in China. While significant improvements have been made in climate models, they often struggle to simulate local-to-regional extreme rainfall(e.g., MYR). Yet, large-scale climate modes(LSCMs) are relatively well represented in climate models.Since there exists a close relationship between MYR and various LSCMs, it might be possible to develop causality-guided statistical models for MYR pr...     

CSEM technology as a value driver for hydrocarbon exploration

The use of the controlled source electromagnetic (CSEM) method as a risk reduction tool in marine hydrocarbon exploration is gaining increased acceptance in the oil industry. This is related to the ability to map resistivity contrasts in the sub-surface and thus aid the detection of hydrocarbons which are typically more resistive than surrounding rocks. Whereas acoustic (seismic) energy allows for mapping sub-surface structures that may contain hydrocarbons, electromagnetic (EM) energy can often say something about the fluids contained within the structures. Numerous successful CSEM case stories have been published over the past several years. However, there are also quite a few stories about “failure”-cases, although not well documented in the literature. Such “failure”-cases may reflect the lack of understanding of the CSEM technology and how CSEM data can act as a value driver. In order to understand this, it is necessary to handle uncertainties and decisions associated with the technology, These include geological uncertainties, noise models, survey designs, forward modelling parameters, inversion/migration parameters and pre-processing of real data. A proper handling of these uncertainties and decisions will aid in defining and constraining the chance of geologic success and geologic-success-case net present value for prospects prior to drilling wells. As such, the CSEM technology has a significant potential to increase exploration efficiency, if applied correctly.     

Spatial prediction on river networks: comparison of top‐kriging with regional regression

Top‐kriging is a method for estimating stream flow‐related variables on a river network. Top‐kriging treats these variables as emerging from a two‐dimensional spatially continuous process in the landscape. The top‐kriging weights are estimated by regularising the point variogram over the catchment area (kriging support), which accounts for the nested nature of the catchments. We test the top‐kriging method for a comprehensive Austrian data set of low stream flows. We compare it with the regional regression approach where linear regression models between low stream flow and catchment characteristics are fitted independently for sub‐regions of the study area that are deemed to be homogeneous in terms of flow processes. Leave‐one‐out cross‐validation results indicate that top‐kriging outperforms the regional regression on average over the entire study domain. The coefficients of determination (cross‐validation) of specific low stream flows are 0.75 and 0.68 for the top‐kriging and regional regression methods, respectively. For locations without upstream data points, the performances of the two methods are similar. For locations with upstream data points, top‐kriging performs much better than regional regression as it exploits the low flow information of the neighbouring locations. Copyright © 2012 John Wiley & Sons, Ltd.     

Geochemical evidence of microbial activity within ooids

Ooid formation remains elusive despite their importance as palaeoclimatic indicators and important contributors to global carbonate budget. Based on stable isotopes, nutrient and elemental analyses on solid components and ooidal leachates, this study supports the notion of microbial involvement in the development of ooids from Great Bahama Bank. Carbon and nitrogen isotopic analyses on organic fractions identified geochemical signatures of microbial activity. The δ¹³C values for organic carbon in the bulk (?11·9 to ?16·9‰); intercrystalline/intracrystalline (?11·9 to 16·7‰); and intracrystalline phases (?12·4 to ?17·7‰) were similar and, except for the more enriched values of ooids from Butterfly Beach, were within the range of photosynthesisers. The δ¹⁵N values for the bulk (+0·5 to ?0·2‰); intercrystalline/intracrystalline (?0·3‰ to ?0·7‰) and intracrystalline organic matter (?0·3 to ?1·7‰) showed a narrow range consistent with nitrogen fixation. While positive δ¹⁵N and δ¹⁸O values of the leached from the ooids provided evidence of denitrification, the carbonate associated sulphate δ³⁴S_CAS of the bulk sediments (+19·2 to +19·6‰) and δ³⁴S of the leachates (+16·6 to +18·3‰) provided weak indication of sulphate reduction, suggesting either that high concentrations of isotopically enriched S are overriding bio‐signatures of sulphate reduction or that microbes are preferentially using as an electron acceptor. In contrast, the elevated sulphate concentrations of the leachates suggest the occurrence of microbial sulphide oxidation within ooids. The high Mg/Ca of the leachates and scanning electron microscope analyses provide putative evidence of amorphous calcium carbonate and a formative role in CaCO₃ precipitation. Together, these findings indicate that a redox dependent microbial consortium may influence CaCO₃ precipitation in the form of ooid accretion, cementation and micritization. It is also inferred that ooid deposits are not suitable indicators of palaeoclimate because ooids are affected throughout their life by a complex chain of abiotic and biological processes which can lead to large geochemical offsets.     

Multi-stage Ag–Bi–Co–Ni–U and Cu–Bi vein mineralization at Wittichen,Schwarzwald, SW Germany: geological setting,ore mineralogy,and fluid evolution

The Wittichen Co–Ag–Bi–U mining area (Schwarzwald ore district, SW Germany) hosts several unconformity-related vein-type mineralizations within Variscan leucogranite and Permian to Triassic redbeds. The multistage mineralization formed at the intersection of two fault systems in the last 250 Ma. A Permo-Triassic ore stage I with minor U–Bi–quartz–fluorite mineralization is followed by a Jurassic to Cretaceous ore stage II with the main Ag and Co mineralization consisting of several generations of gangue minerals that host the sub-stages of U–Bi, Bi–Ag, Ni–As–Bi and Co–As–Bi. Important ore minerals are native elements, Co and Ni arsenides, and pitchblende; sulphides are absent. The Miocene ore stage III comprises barite with the Cu–Bi sulfosalts emplectite, wittichenite and aikinite, and the sulphides anilite and djurleite besides native Bi, chalcopyrite, sphalerite, galena and tennantite. The mineral-forming fluid system changed from low salinity (<5 wt.% NaCl) at high temperature (around 300°C) in Permian to highly saline (around 25 wt.% NaCl + CaCl₂) at lower temperatures (50–150°C) in Triassic to Cretaceous times. Thermodynamic calculations and comparison with similar mineralizations worldwide show that the Mesozoic ore-forming fluid was alkaline with redox conditions above the hematite–magnetite buffer. We suggest that the precipitation mechanism for native elements, pitchblende and arsenides is a decrease in pH during fluid mixing processes. REE patterns in fluorite and the occurrence of Bi in all stages suggest a granitic source of some ore-forming elements, whereas, e.g. Ag, Co and Ni probably have been leached from the redbeds. The greater importance of Cu and isotope data indicates that the Miocene ore stage III is more influenced by fluids from the overlying redbeds and limestones than the earlier mineralization stages.     

Farm size and landscape composition in relation to landscape changes in Denmark

Geografisk Tidsskrift, Danish Journal of Geography 106(2): 45–59, 2006

This paper explores relationships between farm size and landscape composition in terms of densities of uncultivated landscape elements and sizes of agricultural fields. The study is based on national agricultural registers for Denmark and on aerial photo interpretation of three study areas, representing different Danish landscape types. Results indicate significantly smaller fields and significantly higher densities of uncultivated landscape elements on small farms (<25 ha). At national level, current differences between small and large farms are to some extent caused by landscape changes between 1998 and 2004. Analyses of the study areas indicate that current differences between small and large farms mainly evolved between 1982 and 2002, while the influences of changes between 1954 and 1982 are limited. Relationships between farms size and landscape composition are independent of spatial variations in soil type and slope conditions. Consequently, attention must be paid to other parameters linked to farm size. In particular, the effects on landscape composition of part-time and hobby farming, as well as production type, must be considered.