Comparison of oscillatory and stationary flow through porous media

Experiments were conducted in an oscillatory water tunnel to investigate what effects temporal inertia has on the resistance of a granular medium. The flow law governing stationary porous media flow is reasonably well accepted and understood but the effects of unsteady flow have commonly been neglected. The present research was designed to assess the magnitude of the acceleration effects on media of uniformly packed spheres of equal diameter and on one sample of randomly placed stone.Oscillatory flow tests were made in a large oscillatory flume tunnel with periods varying from 3 to 12 seconds. The influence of properties of the medium (grain size and porosity) were tested by using spheres with two different diameters and packing each size sphere in different geometric arrangements. Tests made on a stone sample provided a qualitative assessment of the effects of more random material properties.For the experiments described in this paper, the Forchheimer unsteady-stationary flow law described the oscillatory measurements well when velocities and energy losses were maximum. Empirical coefficients determined from steady-stationary flow were generally found to apply to the unsteady flow, however some evidence of dependency on the period of oscillation was noted.     

Sublethal effects of hydrogen sulfide in sediments on the Urchin Lytechinus pictus

Laboratory exposures of the urchin Lytechinus pictus to sediment dosed with varying concentrations of hydrogen sulfide (H₂S), but without elevated organic material, were conducted. Changes in mortality, behavior, growth and gonad production were measured during 49 days' flow through exposures. Hydrogen sulfide concentrations of 165·8 μ liter⁻¹ in pore water caused significant changes in all parameters measured. Concentrations as low as 32·9 μ liter⁻¹ caused significant decreases in wet weight and male gonad production. A concentration of 91·8 μ liter⁻¹ caused the mortality rate to increase 100-fold over control exposures (0·63 μ liter⁻¹). Sublethal effects on growth and gonad production could have been caused by either direct biochemical inhibition by H₂S or secondarily through behavioral modifications. Hydrogen sulfide concentrations above 165·8 μ liter⁻¹ are common near sewage outfalls and could contribute to changes in species composition and sediment toxicity that occur there.     

Contamination of organotin compounds and imposex in molluscs from Vancouver,Canada

Gastropods and bivalves were collected at 15 sites at Vancouver and Victoria, Canada between 24 May and 7 June, 1999, to establish tissue concentrations of butyltin and phenyltin compounds, to record imposex symptoms in gastropods, and to assess the present status of organotin contamination around Vancouver. No neogastropods (such as Nucella lima) were found around Vancouver. Neogastropod populations could have been extirpated by severe TBT contamination in Vancouver, as relatively high concentrations of TBT were detected in tissues of Mytilus trossulus from Vancouver, and the neogastropods distributed in Vancouver might be sensitive to TBT. Recovery from imposex, however, was observed in neogastropod populations from three sites at Victoria and Mission Point. TBT contamination has continued around Vancouver, arising from continuous use of TBT in antifouling paints for vessels larger than 25 m in length; however, TBT has decreased around Victoria and Mission Point. Different patterns of TBT accumulation in tissue were observed among the bivalve species from Vancouver. The highest TBT concentration detected in Tresus capax suggested some possible adverse effects. TBT was the most predominant butyltin component in almost all bivalve specimens surveyed, suggesting a low rate of TBT metabolism. Phenyltin compounds were not detected in any molluscan specimens in this study.     

Submarine slope mudstone facies,cozy dell formation (Middle Eocene), California

A 120 m thick section of the Cozy Dell Formation (middle Eocene), southem California, consists of a graylaminated mudstone and a tanungraded mudstone; sandstone beds are associated with the laminated mudstone. Sedimentary structures, stratification sequences, foraminiferal distributions, and composition indicate that the ungraded mudstone is an upper slope hemipelagic deposit, while the laminated mudstone is an overbank deposit associated with shallow channels or gullies in which the sandstone beds were deposited. This depositional setting may be analogous to that of the modern Mississippi River delta front.     

Facies recognition of some Tertiary coals applied to prediction of oil source rock occurrence

Coals are oil source rocks in many of the Tertiary basins of Southeast Asia. The precursors of these hydrogen rich and oxygen poor coals are coastal plain peats which have mainly developed in an everwet and tropical climate. In these environments water flow and reworking can concentrate liptinitic kerogen in preference to vitrinitic kerogen. The distribution, petrography and chemistry of the coaly Miocene source rocks present in the Kutai Basin are described. The recognition of environmental controls on the accumulation of potentially oil-prone coals and coaly shales in deltaic environments is an aid to predictive source bed recognition in petroleum exploration. Comments on the environment of deposition of coaly sediments in the basins of the Norwegian Sea are discussed with reference to their possible oil and/or gas sourcing potential. The Triassic - Jurassic coals of the Haltenbanken area may become more oil-prone towards the delta margins, and facies mapping could aid oil exploration in this area.     

Estimation for partially observed Markov processes

Many stochastic process models for environmental data sets assume a process of relatively simple structure which is in some sense partially observed. That is, there is an underlying process (X_n, n 0) or (X_t, t 0) for which the parameters are of interest and physically meaningful, and an observable process (Y_n, n 0) or (Y_t, t 0) which depends on the X process but not otherwise on those parameters. Examples are wide ranging: the Y process may be the X process with missing observations; the Y process may be the X process observed with a noise component; the X process might constitute a random environment for the Y process, as with hidden Markov models; the Y process might be a lower dimensional function or reduction of the X process. In principle, maximum likelihood estimation for the X process parameters can be carried out by some form of the EM algorithm applied to the Y process data. In the paper we review some current methods for exact and approximate maximum likelihood estimation. We illustrate some of the issues by considering how to estimate the parameters of a stochastic Nash cascade model for runoff. In the case of k reservoirs, the outputs of these reservoirs form a k dimensional vector Markov process, of which only the kth coordinate process is observed, usually at a discrete sample of time points.     

Thermal and isotopic profiling of the Pipeline hydrothermal system: Application to exploration for Carlin-type gold deposits

New exploration techniques are vital to the search for new orebodies in mature terranes, as well as for extensions of existing orebodies. This research focused on application of low-temperature dating techniques (primarily apatite fission-tracks) and stable isotope measurements (carbon and oxygen in carbonate rocks) in and around the Pipeline deposit, a Carlin-type gold system. The primary purpose of the project was to assess whether these techniques could provide exploration vectors that might be used in conjunction with other geologic, geochemical, and geophysical techniques to determine the locus of fossil hydrothermal fluid flow, and the attendant possibility of finding economic mineral deposits.At Pipeline, measurements of apatite fission-tracks and (U − Th) / He geochronometry yield a clear indication of the elevated temperatures associated with the fossil hydrothermal system. The pattern is one of a central target (Pipeline deposit) with decreasing thermal effects as far as several kilometers laterally from the known ore zone. Because of the irregular nature of fluid flow through fractures, a significant number of samples are required to discern this pattern, but the pattern is quite clear from the 32 samples in and around the Pipeline pit.Stable isotope measurements of carbonate rocks yield patterns centered on the Pipeline pit area. Oxygen isotopes in particular are shifted toward lower values as the result of interaction between the hydrothermal fluids and carbonate rocks. Carbon isotopes show a pattern, but it is somewhat more difficult to interpret than the oxygen isotope pattern. As with the geochronometric patterns, isotopic indications of fluid flow are present several kilometers from the ore zone at Pipeline. Also as with the geochronometric data, a relatively large sample set is required to see the pattern. At Pipeline, the patterns are evident in approximately 45 surface samples and very clearly in the cross-sections containing approximately 100 samples.From these data, it is clear that thermal and stable isotopic measurements on rocks at a significant distance from the known Pipeline hydrothermal system record the passage of hot fluids through the rock. Both techniques provide a footprint of the Pipeline system that is several diameters larger than the ore zone (as presently known). Therefore, thermochronologic and stable isotopic measurements can be utilized in conjunction with other techniques as part of an overall exploration strategy for Carlin-type deposits. Although these techniques do not provide a direct indication of the metal content of the fossil hydrothermal fluids, they do provide an indication of the robustness of fluid flow and the potential size of a hydrothermal system.