Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

Effect of Sea Level Variation on Tidal Characteristic Values for the East China Sea

1 .IntroductionTheglobalairtemperatureroseabout 0 .5～ 0 .6°Coverthepast 2 0thcentury ,andtheglobalmeansealevelincreasedbyabout2 0cmduringtheperiod .Theregionalmeansealevelriseswiththerisingglobalmeansealevel.Zuoetal.( 1 997)indicatedthatthemeanrisingrateofabsolutemeansealevelalongtheChinacoastontheassumptionofunifiedisostaticdatumis 2mm a .Woodworth( 1 999)analyzedsealevelspanning 1 76 8tothepresentinLiverpool,andobtainedaseculartrendforheperiodupto 1 880of0 .39± 0 .1 7mm a ,andatrendfort…     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

Estimation of Water Particle Velocities by Empirical Transfer Function

-In previous and this studies it appears that the linear and nonlinear wave theory can notaccurately and easily predict the water particle velocities.Therefore,different from the theoretical consider-ations,in this study we have attempted to determine the transfer function empirically.Laboratory experi-ments were performed under various wave conditions.The empirical formulas of the transfer function ofthe wave height,angular frequency and water particle velocity were obtained on the basis of these test databy dimensional analysis and regression analysis.In intermediate and deep water depth conditions,thetransfer function was only a function of a nondimensional parameter which is composed of the angular fre-quency,the depth of the velocity gauge under the still water level,water depth and the acceleration of grav-ity.Finally,the empirical formulas were compared with experimental data and observational data formpresent and Cavaleri's(1978)studies.The empirical formulas were found to be in sufficient correl     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

Numerical Simulation of Non-Linear Wave Propagation in Waters of Mildly Varying Topography with Complicated Boundary

In this paper, the characteristics of different forms of mild slope equations for non-linear wave are analyzed, and new non-linear theoretic models for wave propagation are presented, with non-linear terms added to the mild slope equations for non-stationary linear waves and dissipative effects considered. Numerical simulation models are developed of non-linear wave propagation for waters of mildly varying topography with complicated boundary, and the effects are studied of different non-linear corrections on calculation results of extended mild slope equations. Systematical numerical simulation tests show that the present models can effectively reflect non-linear effects.     

Early Uplift History of the Tibetan Plateau:Records from Paleocurrents and Paleodrainage in the Hoh Xil Basin

Paleocurrent indicator data collected in field work were used to study the early Cenozoic regional paleodrainage patterns in the Hob Xil basin in northern Tibetan plateau. The paleocurrent directions of the Eocene Fenghuoshan Group obviously show that the flows were northward with a unidirectional dispersal pattern. This probably reflects the uplift of the Qiangtang terrain during the initial basin deposition period and indicates that the Tanggula Moutains occurred as topographic highlands at least in the Eocene. Paleoflows of the Oligocene Yaxicuo Group were dominantly oriented to the north and then flowed eastwards during its late deposition. This regional variability of paleodrainage patterns of the Yaxicuo Group is interpreted to record the dispersal style of sediments from transverse rivers to longitudinal river systems. It is inferred that the Oligocene uplift of the Kunlun Mountains obstructed by northward paleoflows and created longitudinal river systems parallel to the orogenic belts. The temporal and spatial changes of the paleodrainage patterns suggest that the northern boundary of the Tibetan plateau during the early Cenozoic was situated in the Hoh Xil area and its uplift has progressed northwards through time.     

南充市城区地质环境质量分区模糊评价

在收集了大量的地质资料的基础上,结合地理信息系统的数据库和空间分析功能,通过专家一层次分析法确定权重,运用模糊评判法对南充市城市地质环境质量进行分区评价。地质环境是城市建设和发展的基础,随着城市化进程加快,城市地质环境问题越来越突出。因此,对城市地质环境条件进行定量评价,对于城市规划和建设具有重要的指导意义：评价的结果将南充市城市地质环境划分为3个区11个亚区,各区地质环境质量有明显的差异,并提出城市建设合理的发展方向。     

基于WiMAX的地质灾害应急无线通信系统探索

基于OFDM核心技术的WiMAX(全球微波接入互操作性)具有4G技术的特点。与3G和WiFi无线通讯技术相比具有明显的高速率、大容量数据传输优势。本文就基于WiMAX的地质灾害应急通讯系统的几种技术方案加以详细论述,说明WiMAX在地质灾害应急指挥中具有广阔前景。