埋藏条件下碳酸盐岩实验室溶蚀作用模拟的热力学模型与地质勘探方向——以陕甘宁盆地下奥陶统马家沟组第五段为例

陕甘宁盆地下奥陶统马家沟组五段为潮坪相碳酸盐岩夹蒸发盐沉积。马五段经历了多期复杂的成岩作用，其中溶蚀作用对马五段影响深刻。首次引用热力学理论对埋藏条件下碳酸盐岩溶蚀作用进行了理论分析和计算。其结果表明碳酸盐岩在埋藏成岩的不同温度压力条件下，酸性介质中溶解反应的吉布斯自由能均为负值，说明反应可自动向方解石、白云石溶解的方向进行，并随着温压的升高溶解的趋势增大，而且白云石溶解的趋势比方解石更大。碳酸盐岩溶蚀作用是受热力学规律支配的自然地质作用。碳酸盐岩溶蚀实验模拟的热力学数学模型对陕甘宁盆地油气田勘探具有重大的理论意义和实际应用价值。     

琼西抱板群变质沉积岩地球化学研究

琼西中元古代抱板群变质沉积岩可分为白云母石英片岩组和石英二云母片岩组，其原岩为砂岩质泥质沉积岩夹火山物质。白云母石英片岩组和石英二云母片岩组在地球化学成分上的差异是原始沉积化学分异作用的结果。对主元素、微量元素（含稀土元素）及Sm-Nd同位素的综合研究表明，海南岛存在古元古代或更早的古老基底，抱板群变质沉积岩一部分来源于成熟度较低的古老地壳物质，另一部分来源于含地幔火山物质较多的初生地壳，或与研究区大规模造山运动、构造－岩浆活动所伴生的地幔物质加入有关。初步研究显示，琼西抱板群变质沉积岩可能是造山带岛弧和活动大陆边缘区（扩张弧后或弧间盆地）大地构造环境下的沉积产物。     

相山铀矿田成矿机理研究

本文重点研究了相山铀矿田的成矿时代及成矿环境 ,并剖析了典型矿床在垂向上物质成份的变化规律。研究结果表明 :相山矿田主要经历了两期铀矿化作用 ,第一期为铀 赤铁矿化阶段 ,成矿年龄为 1 1 5± 0 6Ma ;第二期为铀 萤石 水云母化阶段 ,成矿年龄为 99± 6Ma。两期成矿作用分别形成于不同的地质环境 ,第一期成矿作用主要与大规模火山塌陷及次火山岩侵位有关 ,第二期成矿作用则主要与因太平洋板块的松弛作用而形成的区域性伸展、裂解及中基性脉岩的活动有关。相山矿田的热液蚀变类型不仅在平面上存在东碱、西酸的演化趋势 ,而且在垂向上还存在上酸、下碱的演化规律。通过对相山矿田成矿机理的深入探讨 ,认为相山矿田是成矿元素多阶段富集、成矿热液多期叠加以及多种地质因素共同作用的产物。     

含硒硫锑铅矿在我国的发现及其意义

含硒硫锑铅矿是硫锑铅矿的含硒变种，产于皖南宋冲锑－铅矿点的矿脉中，这是含硒硫锑铅矿在我国的首次发现。在该矿点，含硒硫锑铅矿含量高，独立形成锑－铅矿体，这在国内外尚属首例。含硒硫锑铅矿中Ｓｅ的含量ｗＳｅ＝１．５８８％，其化学式为（Ｐｂ４．６１７１Ａｇ０．０２１７）４．６３８８（Ｓｂ３．６７８１Ａｓ０．１９００）３．８６８１（Ｓ１０．６３４５Ｓｅ０．３６３７Ｔｅ０．００１８）１１。     

生烃动力学模拟实验结合GC-RMS测定在有效气源岩判识中的应用

采用动力学模拟实验对Ⅰ型干酪根的生烃过程进行了模拟,并对热解产物中的正烷烃组分进行了GC-IRMS分析。分析结果表明,当Ro<1.6%时,C8+正烷烃的碳同位素组成主要继承了母质的特征,而随热演化程度的变化不显著,因此可用于油(气)/源对比。当Ro在1.6%～2.0%之间时,C8+正烷烃迅速裂解,其δ13C显著增重。Ro>2.0%之后,C1—C4气态烃随热演化程度的增加,逐渐富集13C,其δ13C与Ro之间的关系明显受升温速率的影响,所以由模拟实验获得的δ13C1-Ro关系式不适用于高—过成熟的气源岩研究;而δ13C1-F(甲烷生成率)的关系则不受升温速率的影响,适用范围较宽,故可用于高演化阶段的有效气源岩的判识。     

Shear wave velocities and primary influencing factors of Campi Flegrei–Neapolitan deposits

The Campi Flegrei caldera (Italy) has been the site of intense seismic activity over the past decades. This area is densely populated and includes important towns such as Napoli with historical sites and supporting many industries. For the proper use and management of the region, the evaluation of the dynamic properties of near-surface rocks is necessary.

The volcanological pattern has been reconstructed from the lithostratigraphies of several drillings. The most interesting and widespread pyroclastic products are the pozzolana deposit (soil) and the Neapolitan Yellow Tuff (rock). Both pozzolana and tuff products are covered by recent eluvial and coastal sandy deposits and younger volcanic products (<12 000 years). The characteristic ranges of the shear wave velocity (V_s) of the Campi Flegrei–Neapolitan soils and tuffs are defined and the primary influencing factors are evaluated. For the sandy deposits, the results show that eluvial and lacustral products have lower shear wave velocities than coastal products. For the volcanic products younger than 12 000 years b.p. the influence of vertical pressure is emphasized. As regards the pozzolana deposit (soil) and the Neapolitan Yellow Tuff (rock), a major influencing factor is shown by the textural characteristics and the different hardening degrees as a consequence of the diagenetic processes. The scattering of the V_s velocities for the same formation is so wide that only the variability ranges can be individuated. These results suggest a need to carry out detailed V_s measurements or, at least, to make a parametric study of the effect of the V_s ranges on seismic response analysis in order to give safe building codes.     

The cassiterite-polymetallic sulfide deposits of Dachang (Guangxi,People's Republic of China)

The Dachang mining district is the second largest producer of Sn in China and an important source of other metals. The known mineralizations can be divided into four groups: (1) cassiterite + Cu-Fe-Pb-Zn sulfides and sulfosalts, (2) Zn-Cu skarn, (3) Sb-W veins and (4) residual and placer concentrations of Sn and Fe oxides. Most orebodies are hosted by Upper Devonian calcareous, marly and quartzitic formations in spatial association with Cretaceous Yanshanian magmatites. A characteristic feature is the occurrence of stratiform, lens-shaped orebodies which appear to represent the root zone of overlying stockwork mineralizations. The metallogeny of the district may be interpreted in terms of an Upper Devonian Sn and polymetallic concentration with subsequent remobilization and, possibly, the introduction of additional elements during the late stages of the Yanshanian magmatism.     

Drilling Technology of the M-1 Well in Hot Dry Rock of Matouying,Tangshan北大核心CSCD

This paper presents the general situation and key techniques of the drilling well M-1 in Matouying dry hot rock exploration hole, Leting, Tangshan, Hebei Province. A series of problems have been studied on the sea water drilling fluid, high temperature resistant fresh water drilling fluid, screw composite drilling technique, screw hole coring technology, and high temperature, thus solving the difficulty of sea water drilling fluid well protection, poor stability of drilling fluid under high temperature, and low efficiency in hot dry rock drilling and coring drilling to ensure the safety of the borehole and improve drilling efficiency. The high temperature resistant double condensation and double density cement slurry system and relevant technical measures are adopted to ensure the quality of cementing in the high temperature environment. Through the understanding and analysis of the strata in this area, this work provides valuable experience for drilling in the same strata in the future. The final hole depth of the M-1 well in Matouying is 4502. 11m, and hot dry rock with a temperature of 150t is found at 3965 m, which is the first hot dry rock well with a temperature of more than 150°C in the Beijing-Tianjin-Hebei region so far. © 2022 Editorial Board of Geology and Exploration. All rights reserved.     

A comparison of boundary layer diffusion schemes in unstable conditions over land

We compare the results of a local and a nonlocal scheme for vertical diffusion in the atmospheric boundary layer with observations at the 200 m tower at Cabauw. This is done for a 12 h period during daytime on 31 May 1978, which is characterised by strong insolation, clear skies, moderately strong winds and weak advection. The local diffusion scheme uses an eddy diffusivity determined independently at each point along the vertical based on local vertical gradients of wind and virtual potential temperature, similar to the usual approach in atmospheric models. The nonlocal scheme determines an eddy diffusivity profile based on a diagnosed boundary-layer height and a turbulent velocity scale. It also incorporates nonlocal (vertical) transport effects for heat and moisture. The boundary-layer diffusion schemes are forced with the locally observed fluxes for heat and moisture. The outputs of the scheme are compared with the observed mean structure along the Cabauw tower, and the radiosonde profile at a nearby location (De Bilt). Overall, the nonlocal scheme transports moisture away from the surface more rapidly than the local scheme, and deposits the moisture at higher levels. The local scheme tends to saturate the lowest model levels unrealistically in comparison with the observations. We also compare the outputs of the two diffusion schemes with the results of a transilient model simulation. Subsequently, we study the impact on the model behaviour by varying important parameters in both diffusion schemes and we investigate the sensitivity to uncertainty in the environmental conditions. Finally, we study the interaction of the diffusion schemes with a simple surface flux scheme.     

Prediction and monitoring of monsoon intraseasonal oscillations over Indian monsoon region in an ensemble prediction system using CFSv2

An ensemble prediction system (EPS) is devised for the extended range prediction (ERP) of monsoon intraseasonal oscillations (MISO) of Indian summer monsoon (ISM) using National Centers for Environmental Prediction Climate Forecast System model version 2 at T126 horizontal resolution. The EPS is formulated by generating 11 member ensembles through the perturbation of atmospheric initial conditions. The hindcast experiments were conducted at every 5-day interval for 45 days lead time starting from 16th May to 28th September during 2001–2012. The general simulation of ISM characteristics and the ERP skill of the proposed EPS at pentad mean scale are evaluated in the present study. Though the EPS underestimates both the mean and variability of ISM rainfall, it simulates the northward propagation of MISO reasonably well. It is found that the signal-to-noise ratio of the forecasted rainfall becomes unity by about 18 days. The potential predictability error of the forecasted rainfall saturates by about 25 days. Though useful deterministic forecasts could be generated up to 2nd pentad lead, significant correlations are found even up to 4th pentad lead. The skill in predicting large-scale MISO, which is assessed by comparing the predicted and observed MISO indices, is found to be ~17 days. It is noted that the prediction skill of actual rainfall is closely related to the prediction of large-scale MISO amplitude as well as the initial conditions related to the different phases of MISO. An analysis of categorical prediction skills reveals that break is more skillfully predicted, followed by active and then normal. The categorical probability skill scores suggest that useful probabilistic forecasts could be generated even up to 4th pentad lead.