Some chemical characteristics of the brines in Bannock and Tyro Basins: salinity, sulphur compounds, Ca, F, pH, At, PO4, SiO2, NH3

Results of the chemical investigation on the Bannock and Tyro Basins are reported.Both basins were found to be hypersaline ( 10 times higher than salinity of normal seawater) and anoxic. In all investigated basins a region of transition, a few meters thick, was identified at depths > 3327 dbar. It is characterized by a sharp gradient of salinity, and all concentrations of analysed species increase strongly except for dissolved oxygen and nitrate, which immediately drop to zero. This region appears as a sharp boundary that prevents mixing. As a result, in the presence of organic matter, an anoxic condition developed with the complete depletion of dissolved oxygen. At the same time, hydrogen sulphide and ammonium accumulated within the brine. Between the Bannock and the Tyro brines differences occur in the measured concentrations of H₂S, SO²⁻₄, Ca²⁺ and NH₃. There are some differences also within the Bannock area sub-basins.The Libeccio sub-basin, in the Bannock area, contains a double-layered brine: the upper layer is 140 dbar thick and the lower layer is 300 dbar thick. A second interface between upper and lower brines develops at a depth of 3500 dbar. Nearly all of the measured concentrations vs. depth show the double layer, with the exception of ammonium, the concentration of which remains nearly constant throughout the anoxic column. Profiles of the other species analyzed show remarkable differences on passing from the upper to the lower brine. Hydrogen sulphide, sulphate and fluoride concentrations appear constant and then increase at the second interface. The calcium concentration is also constant in the upper brine, but decreases at the second interface. Total alkalinity and phosphate concentrations show a maximum peak just below the first interface. However, after passing through the second interface all the chemical parameters exhibit an almost constant behaviour down to the bottom.Hypersaline conditions are attributed to the dissolution of Messinian evaporite, and anoxia is suggested to originate from the oxidation of organic matter present in sediments and from the absence of bottom water circulation in such a deep and enclosed environment.The chemical conditions can be summarized as follows: in the Libeccio Basin the values for the species analysed have the ranges: 39–321 psu for ‘salinity’, 8.2−6.5 for pH, 2.7–4.0 mM for total alkalinity, 0.2-0 mM for dissolved oxygen, 0–1669 μM for hydrogen sulphide, 0–198 μM for thiol, 31–99 mM for sulphate, 11–21 mM for calcium, 7–100 μM for fluoride, 0.2–3080 μM for ammonium, 5.8-0 μM for nitrite, 0.2–12 μM for phosphate and 8–130 μM for silicate.     

Natural and anthropogenic sources of total suspended particulate and their contribution to the formation of black crusts on building stone materials of Catania (Sicily)

Blackening and disaggregation of exposed surfaces of stone monuments are well-known effects of stone decay taking place in polluted urban environments all over the world. This paper aims to assess the contribution of natural and anthropogenic sources of total suspended particulate (TSP) causing permanent damage (black crusts) to the stone monuments of Catania (Sicily), one of the most popular ??cities of art?? of southern Italy. Atmospheric pollution of Catania, a typical Mediterranean coastal town, is mainly contributed by vehicle exhaust emissions rather than industrial ones. Episodically, the city also suffers gaseous and ash emissions (plumes) from the nearby Mount Etna volcano. Thus, to discriminate between natural and anthropogenic contributions to stone decay on Catania monuments, black crusts and TSP were sampled within the urban area and subjected to specific analytical procedures (optical microscopy, X-ray powder diffraction, Fourier transformed infrared spectroscopy, scanning electron microscopy equipped with energy dispersive spectrometry, ionic chromatography and dual inlet mass spectrometry). Mineralogical, chemical and isotopic characterization of black crusts and TSP provided new insights concerning the partition of sulfate sources in this particular urban context. The influence of Mount Etna emissions on both TSP and black crusts compositions was shown. Nevertheless, the key role of anthropogenic sources in the total sulfate budget was confirmed, while sea spray and volcanic emissions were found to make subordinate contributions. Quantitative data useful for the identification of the threshold pollution levels for preventive conservation of Catania monuments were obtained.     

Quantitative basin characterisation to refine debris-flow triggering criteria and processes: an example from the Italian Western Alps

This paper investigates rapid channelized debris flow related to rainfalls in small alpine basins. Its goal is to evaluate and correlate different geological and technical aspects with predisposing and triggering factors that can control these phenomena. The study area is the upper part of the Susa Valley where 12 small basins were selected. For each of them, lithological, geomorphological, climatic and technical information were mapped and analysed. Debris-flow triggering conditions, flow and depositional processes were related to physical characteristics of the basin that can be easily measured and quantified. At least three different groups of basins were found: G1) basins with one event each 4–6 years, characterised by massive or blocky calcareous rocks, G2) basins with more than one event per year that show an abundance of layered or sheared fine-grained rocks and G3) basins with recurrence levels exceeding 10 years, activated only by heavy and prolonged rainfalls, marked by massive or blocky coarse-grained igneous rocks. Furthermore, important morphometric differences were found. These considerations are useful in terms of hazard zonation and risk mitigation.     

Contribution of the SISCam Web-based GIS to the seismotectonic study of Campania (Southern Apennines): an example of application to the Sannio-area

In this article the implementation and potential of the Seismotectonic Information System of the Campania Region (SISCam) are described, in particular an application of this Web-based GIS system to the seismotectonic analysis of the Sannio area (Southern Apennines) is performed. WEB-GIS technologies greatly contribute to both the environmental monitoring and the disaster management of areas affected by high natural risks. Specifically the SISCam system has been developed with the aim of providing easy access and fast diffusion, through Internet technology, of the most significant geological, geophysical, and territorial data relative to the Campania Region. The Sannio area has been selected as our application example because it is among the most active seismic regions in Italy. This portion of the Southern Apennines which was hit by the June 5, 1688 strong earthquake (M _W = 6.7, CPTI 1999) and by some low- and moderate-energy seismic sequences (1990–1992, 1997), is characterized by a complex inherited tectonic setting and low-tectonic deformation rates that hide the seismogenic sources position. Since this case study turned out to be complicated, the use of the SIScam WEB-GIS has become indispensable because it allowed us to visualize, integrate and analyze all the data available, in order to obtain an accurate and direct picture of the seismotectonic setting of the area. Moreover, a different approach of data analysis was necessary, due to the lack of up-to-date neotectonic and structural data; therefore, the operation of this GIS system enabled us to process and generate some original informative layers, through image analysis, such as new structural lineaments represented on a map of the potential active faults of the area, which has been the final result of our application, as a contribution to new knowledge about the local seismic risk parameters.     

Research progress in volcanology in the Neapolitan area, southern Italy: a review and some alternative views

Comprehensive reviews are given for the major volcanic systems that occur in the greater metropolitan area of Naples, southern Italy; Mt. Somma-Vesuvius to the east and the Campi Flegrei volcanic system to the west. Also included in the review is a detailed discussion of the large, highly explosive Campania Volcanic Zone (CVZ) ignimbrite events. These volcanic areas have been studied for more than 100 years, yet significant differences of opinion exist related to fundamental issues of origin and distribution. We present some alternative views related to petrogenesis on some issues based on more than 25 years of research. The relationship between risk assessment and management that impacts the threatened society or culture and the past and ongoing fundamental volcanological research is an essential part of the science. Countries with limited resources may be forced to accept an increased risk but even highly industrialized societies may not be able to completely eliminate deaths from volcanic eruptions. Scientific studies of the hazardous regions should be comprehensive and include reasonable alternative interpretations as this information reveals the level of confidence that must be conveyed to the public officials. The authors review the state of the art of risk assessment and management of the volcanic hazards in the Neapolitan region in light of the review of research.     

Tectonic and eustatic controls on Pliocene accommodation space along the front of the southern Apennine thrust‐belt (Basilicata,southern Italy)

The stratigraphical organization of the Pliocene thrust‐top deposits cropping out at the front of the Southern Apennine thrust‐belt has been debated for a long time taking a great importance in the context of the geodynamics of the Central Mediterranean area. During this time, spreading episodes in the Apennine backarc zone alternate with important phases of overthrusting in the thrust‐belt. As a consequence, the Pliocene succession appears to be arranged in a series of stacked units, recording the poliphase tectonic history that leads to the building of the front of the southern Apennine thrust‐belt. Although there is not yet an accordance on the nature and position of the main unconformities bounding the thrust‐top units, all authors agree that the creation of new accommodation space is mainly ruled by contractional tectonics consequent to the eastward nappe propagation according to the Apennine vergence polarity. A detailed geological survey, carried out along a large portion of southern Apennine thrust‐belt front, running south of the Vulture volcano, allowed the collecting of new data concerning the basinal‐formation mechanisms acting during the sedimentation of Pliocene deposits. From this analysis, it is clear that even if contractional tectonics is the predominant factor controlling the creation or destruction of accommodation space, other mechanisms, as well as wedge uplift‐related extensional tectonics and eustasy, could have also played a significant role in the basin accommodation. In order the considered sector of southern Apennines can provide an useful example about the complex phenomena occurring at mountain belt front where the accommodation space results from a concomitance of eustatic and tectonic factors mainly linked to the accretionary wedge activity.     

Petrographic and geochemical characterization of Archaic‐Hellenistic tableware production at Solunto,Sicily

A selected assortment of Archaic‐Hellenistic tableware samples from Solunto, a Phoenician‐Punic site located 20 km east of Palermo (Sicily), has been subjected to thin‐section petrography and chemical analysis (XRF). In this settlement several ceramic kilns remained operative over a long time period (7th to 3rd century B.C.). The main goal of this analytical study is to distinguish the ceramics manufactured locally from regional and off‐island imports. Analytical results were matched to similar data concerning local natural clay sources and to coeval tableware productions from other sites in the same area. The ceramic pastes used by the ancient craftsmen of Solunto in the case of this class of pottery could be differentiated clearly by their petrochemical characteristics. We conclude that ceramics were locally produced far beyond satisfying just internal consumption needs, indicating interaction of Solunto with neighboring Greek colonies, indigenous people, and Phoenician‐Punic colonies of Sicily. © 2009 Wiley Periodicals, Inc.