Scaling wave impact pressures on vertical walls

It is widely recognized that the use of Froude similarity for scaling up wave impact pressures recorded during physical model tests may lead to over-estimation of impact maxima. Based on reviewing historical work dating back to the 30s and further developments in the 60s and 80s, a general method is presented that is suitable for scaling up impact pressures and rise times measured during small scale physical model tests. The method accounts for the effect of air leakage and is applicable to most wave impact loads. The model is applied to scale wave impact pressures on vertical walls and similar structures, and consistent correction factors for the Froude scaling law are derived.     

Onshore sandbar migration at Tairua Beach (New Zealand): Numerical simulations and field measurements

We observed the onshore migration (3.5 m/day) of a nearshore sandbar at Tairua Beach, New Zealand during 4 days of low-energy wave conditions. The morphological observations, together with concurrent measurements of waves and suspended sediment concentrations, were used to test a coupled, wave-averaged, cross-shore model. Because of the coarse bed material and the relatively low-energy conditions, the contribution of the suspended transport to the total transport was predicted and observed to be negligible. The model predicted the bar to move onshore because of the feedback between near-bed wave skewness, bedload, and the sandbar under weakly to non-breaking conditions at high tide. The predicted bathymetric evolution contrasts, however, with the observations that the bar migrated onshore predominantly at low tide. Also, the model flattened the bar, while in the observations the sandbar retained its steep landward-facing flank. A comparison between available observations and numerical simulations suggests that onshore propagating surf zone bores in very shallow water (< 0.25 m) may have been responsible for most of the observed bar behaviour. These processes are missing from the applied model and, given that the observed conditions can be considered typical of very shallow sandbars, highlight a priority for further field study and model development. The possibility that the excess water transported by the bores across the bar was channelled alongshore to near-by rip-channels further implies that traditional cross-shore measures to judge the applicability of a cross-shore morphodynamic model may be misleading.     

Numerical simulation of the tsunami generated by a past catastrophic landslide on the volcanic island of Ischia, Italy

The island of Ischia, Gulf of Naples, Italy, like many other volcanic islands is affected by mass failures, that are mainly related to secondary volcanic processes such as slope steepening and seismic shaking. The block resurgence of its main relief, Mount Epomeo, has been recognised to contribute cyclically to mass instability and cause landslides, that occasionally may reach the sea and start tsunamis. In this work we explore the consequences of the Ischia Debris Avalanche (IDA), a flank collapse that occurred in historical times, and involved the whole Mount Epomeo edifice including its submarine portion, and that may have caused gigantic sea waves affecting all the coasts of Ischia and of the Gulf of Naples. The IDA and the generated tsunami have been taken as the worst-case scenario for the occurrence of a new tsunami in the area. They have been simulated through numerical codes developed and maintained by the University of Bologna. The simulation shows that the IDA-induced tsunami attacks severely all the coasts of the Gulf of Naples with the highest waves obtained for the island of Ischia, the island of Capri and the peninsula of Sorrento. The propagation pattern of the IDA tsunami can be used to get hints on the impact that such an event may have had on early populations habiting Gulf of Naples, but also to get clues on the area that could be most severely hit by a tsunami generated by a smaller-scale landslide that may occur in the same source zone.     

Characterizing impulsive wave-in-deck loads on coastal bridges by probabilistic models of impact maxima and rise times

When waves impact a seawall, a vertical breakwater, an exposed jetty, a pier or a coastal bridge, they abruptly transfer their momentum into the structure. This energy transfer can be very violent and its duration exceptionally short. In the case of coastal bridges, whose spans are designed to have very short vibration period, wave impacts might have duration comparable to the natural period of oscillation of the structure, which therefore becomes prone to damage and failure. Previous forensic studies have documented the relative importance of impulsive loads on deck suspended structure, demonstrating the need to assess the effect of wave impacts on both the stability and the integrity of structural members since the early stages of the design. This requires the estimation of the dynamic characteristics of the loading pattern, and in particular the wave impulse and corresponding impact maxima and rise times. Based on the conservation of momentum, functional relationships between these parameters have been identified since pioneering work dating back to the late '30s of the 20th century. The complexity of the loading process, however, results in a significantly large variability of wave impact maxima and rise times even under similar conditions, suggesting the need for a probabilistic approach to the definition of the relationship between these two variables, to be applied when estimating the dynamic properties of wave for use in structural analysis of coastal structures. In the recent past, some effort has been made to identify functional relationships between such quantities; these require the assessment of the conditional quantiles (or similarly the conditional distribution) of wave impact maxima given the rise times. In this paper, we compare three different statistical methods proposed in the literature to accomplish this task, in order to assess the reliability of the approach and suggest guidelines for practical applications. A copula-based method, Generalized Additive Models for Location, Scale and Shape (GAMLSS), and quantile regression are applied to measurements from large-scale 3-dimensional physical model tests. The investigation suggests that quantile regression gives the simplest results to be used in practice; copula approach and GAMLSS are possible alternative when semi-parametric or fully parametric modeling is needed.     

Depth and Seasonal Distribution of Some Groups of the Vagile Fauna of the Posidonia oceanica Leaf Stratum: Structural and Trophic Analyses

Abstract. The taxonomical and trophic structures of the vagile fauna communities of the leaf stratum in a Posidonia oceanica meadow at Ischia (Gulf of Naples, Italy) were investigated at five stations along a depth gradient (1 to 25 m). Sampling was performed in July, November, February, and May. The analyzed groups - polychaetes, molluscs, tanaids, isopods, amphipods, and decapods - exhibited similar distributional trends in all seasons, with coenotic discontinuities occurring at well-defined depths. The same zonation pattern was produced by feeding-guild analysis. Eleven trophic groups were identified. The most abundant groups were: Herbivores, which were found mainly at the shallow stations; Herbivores-deposit feeders, which were widely distributed along the transect; Deposit feeders-carnivores, found mainly at the deep stations.
This study suggests that in the Posidonia leaf stratum, herbivores and herbivores-deposit feeders, as consumers of epiphytic micro- and macroflora and deposited particulate organic matter, play an important role in the energy transfer from producers to higher trophic levels of the system.     

Biomarkers of Exposure and Effects for Assessing Toxicological Risk of Endocrine Disrupters in Top Predators of the Mediterranean Sea

Abstract. Endocrine Disrupting Chemicals (EDCs) have the potential to alter hormone pathways that regulate reproductive processes in wildlife and fisheries. In this research the unexplored hypothesis that Mediterranean top predator species (such as large pelagic fish and marine mammals) are potentially at risk due to EDCs is investigated. In the Mediterranean environment, top predators accumulate high concentrations of polyhalogenated aromatic hydrocarbons (PHAHs) and toxic metals, incurring high toxicological risk. Here we illustrate the need to develop sensitive biomarkers for evaluation of toxicological risk in top marine predators (Xiphias gladius, Thunnus thynnus thynnus) and non-lethal techniques, such as non-destructive biomarkers, for the hazard assessment of threatened species exposed to EDCs, such as marine mammals ( Stenella coeruleoalba, Tursiops truncatus, Delphinus delphis and Balaenoptera physalus ).     

Heavy metals in marine sediments of Taranto Gulf (Ionian Sea, Southern Italy)

Al, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Ti and Zn concentrations have been determined in surface sediment samples collected in the Taranto Gulf (Ionian Sea, Southern Italy) in order to evaluate their levels and spatial distribution in this important area of the Mediterranean Sea. For various metals, the geoaccumulation index has been calculated as a criterion to assess if their concentrations represent contamination levels or can be considered as background levels. The results show that metals concentrations in sediments can be considered near the background levels found in the Mediterranean Sea.Analytical results have been elaborated by using a Geographical Information System (GIS) software to show metals accumulation areas. Using multivariate statistical analysis, we evaluate the possibility to distinguish the sampling stations, in relation to their geographical position. Results have showed metals distribution in the Taranto Gulf is principally influenced by industrial and urban wastes, located mostly in the northern coastal area of the Ionian Sea. Rivers in the Basilicata region and prevailing anticlockwise marine currents are further factors influencing metal accumulation in sediments.     

A peak acceleration threshold for soil liquefaction: lessons learned from the 2012 Emilia earthquake (Italy)

National and international seismic codes and recommendations provide criteria for liquefaction exclusion based on a peak ground acceleration (PGA) threshold value. In this paper, after a brief review of the procedures and the values suggested in those documents, a database of liquefaction case histories was created, exploiting the background data used in the most relevant verification charts, currently employed in research and professional practice. This dataset was used to identify, on the basis of simple statistical analyses, a PGA threshold on the free ground surface below which liquefaction is unlikely to occur, regardless of the geological site conditions. The calculated value, which is on the order of 0.07–0.1 g, based on the model employed to fit the data, was analyzed in light of information collected during the 2012 Emilia seismic sequence in Italy, which produced many liquefaction events triggered by low acceleration values. The case history of the Emilia earthquake advises setting a PGA threshold for code and recommendations at the lower probability level of occurrence, in the order of 1 %.     

The Holocene tephrostratigraphic record of Lake Shkodra (Albania and Montenegro)

Two cores were recovered in the southeastern part of Lake Shkodra (Montenegro and Albania) and sampled for identification of tephra layers. The first core (SK13, 7.8 m long) was recovered from a water depth of 7 m, while the second core (SK19, 5.8 m long) was recovered close to the present‐day shoreline (water depth of 2 m). Magnetic susceptibility investigations show generally low values with some peaks that in some cases are related to tephra layers. Naked‐eye inspection of the cores allowed the identification of four tephra layers in core SK13 and five tephra layers in core SK19. Major element analyses on glass shards and mineral phases allowed correlation of the tephra layers between the two cores, and their attribution to six different Holocene explosive eruptions of southern Italy volcanoes. Two tephra layers have under‐saturated composition of glass shards (foiditic and phonolitic) and were correlated to the AD 472 and the Avellino (ca. 3.9 cal. ka BP) eruptions of Somma‐Vesuvius. One tephra layer has benmoreitic composition and was correlated to the FL eruption of Mount Etna (ca. 3.4 cal. ka BP). The other three tephra layers have trachytic composition and were correlated to Astroni (ca. 4.2 cal. ka BP), Agnano Monte Spina (ca. 4.5 cal. ka BP) and Agnano Pomici Principali (ca. 12.3 cal. ka BP) eruptions of Campi Flegrei. The ages of tephra layers are in broad agreement with eight ¹⁴C accelerator mass spectrometric measurements carried out on plant remains and charcoal from the lake sediments at different depths along the two cores. The recognition of distal tephra layers from Italian volcanoes allowed the physical link of the Holocene archive of Lake Shkodra to other archives located in the central Mediterranean area and the Balkans (i.e. Lake Ohrid). Five of the recognised tephra layers were recognised for the first time in the Balkans area, and this has relevance for volcanic hazard assessment and for ash dispersal forecasting in case of renewed explosive activity from some of the southern Italy volcanoes. Copyright © 2009 John Wiley & Sons, Ltd.     

Mineralogical and geochemical spatial analyses of a waste-rock dump at the Libiola Fe–Cu sulphide mine (Eastern Liguria,Italy)

In this work, we investigated a 3 ha sulphide-bearing waste-rock dump (Libiola Mine, Italy) using mineralogical, geochemical, and geostatistical analyses. The dumped materials were highly heterogeneous in grain size and lithology and varied both laterally and vertically. Other than the host rock of the ore, basalts and serpentinites, the dumped materials contained high amounts of low-grade chalcopyrite- and pyrite-rich mineralisations. Due to these characteristics and to the absence of minerals able to neutralise acidity, this waste-rock dump can be classified as an acid mine drainage (AMD) producer. The study confirms that AMD is still active and, in the best scenario, can persist for up to 6.17 × 10³ years. The consequences of this process are of serious environmental concern as it involves strong acidification of the circulating waters, the release of potentially toxic metals into the soil, streams and rivers and the precipitation of huge quantities of secondary Fe-oxides and Fe-oxyhydroxides.