Petroleum accumulation and leakage in a deeply buried carbonate reservoir,Níspero field (Mexico)

The filling history of the Níspero deeply buried Lower Cretaceous carbonate reservoir (below 4000 m) from the south part of Gulf of Mexico was studied using a combination of data from petrography, stable isotopes and fluid inclusions and compared with a one-dimensional burial model to derive timing.     

The “El Pilote” fluorite skarn: A crucial deposit in the understanding and interpretation of the origin and mobilization of F from northern Mexico deposits

Fluorite deposits are widespread in northern Mexico and those deposits have traditionally been categorized as exclusively hydrothermal–magmatic in origin. Recently, two different fluorite-bearing type models have been proposed for the Northern Mexican deposits: (1) MVT-like deposits formed from basinal brines mobilized during the Laramide Orogeny (La Encantada deposit, Gonzalez-Partida et al., [Gonzalez-Partida, E., Carrillo-Chavez, A., Grimmer, J.O.W., Pironon, J., 2002. Petroleum-rich fluid inclusions in fluorite, Purisima mine, Coahuila, Mexico. International Geological Review 44 (8), 751–763.]; Tritlla et al., [Tritlla, J., Gonzalez-Partida, E., Levresse, G., Banks, D., Pironon, J., 2004. Fluorite deposits at Encantada-Buenavista, Mexico: products of Mississippi Valley type processes — a reply. Ore Geology Reviews 25, 329–332.]); and (2) fluorite-bearing skarns in close contact with rhyolite intrusives (Levinson, [Levinson, A.A., 1962. Beryllium–fluorine mineralization at Aguachile Mountain, Coahuila, Mexico. American Mineralogist 47, 67–75.]). The El Pilote fluorite deposit falls into the second category, and is the only known example of a magmatic-related fluorite deposit in the area. The fluorite trace-element patterns from both the El Pilote skarn and La Encantada MVT deposits display comparable and very low relative abundances as well as comparable chondrite-normalized REE patterns; this would suggest that the skarn F-source comes from the remobilization of a MVT fluorite manto.     

The snowball Earth aftermath: Exploring the limits of continental weathering processes

Carbonates capping Neoproterozoic glacial deposits contain peculiar sedimentological features and geochemical anomalies ascribed to extraordinary environmental conditions in the snowball Earth aftermath. It is commonly assumed that post-snowball climate dominated by CO₂ partial pressures several hundred times greater than modern levels, would be characterized by extreme temperatures, a vigorous hydrological cycle, and associated high continental weathering rates. However, the climate in the aftermath of a global glaciation has never been rigorously modelled. Here, we use a hierarchy of numerical models, from an atmospheric general circulation model to a mechanistic model describing continental weathering processes, to explore characteristics of the Earth system during the supergreenhouse climate following a snowball glaciation. These models suggest that the hydrological cycle intensifies only moderately in response to the elevated greenhouse. Indeed, constraints imposed by the surface energy budget sharply limit global mean evaporation once the temperature has warmed sufficiently that the evaporation approaches the total absorbed solar radiation. Even at 400 times the present day pressure of atmospheric CO₂, continental runoff is only 1.2 times the modern runoff. Under these conditions and accounting for the grinding of the continental surface by the ice sheet during the snowball event, the simulated maximum discharge of dissolved elements from continental weathering into the ocean is approximately 10 times greater than the modern flux. Consequently, it takes millions of years for the silicate weathering cycle to reduce post-snowball CO₂ levels to background Neoproterozoic levels. Regarding the origin of the cap dolostones, we show that continental weathering alone does not supply enough cations during the snowball melting phase to account for their observed volume.     

Application of trichloroacetic acid (TCA) to extraction of soft body for the determination of tissue Cd, Cu, Pb and Zn in the prosobranch Hydrobia ulvae (Pennant)

The application of trichloroacetic acid (TCA) as a shell extractant for preparation of soft body parts with reference to tissue metal concentrations (Cd, Cu, Pb, Zn) in shellfish has been evaluated on the example of the mud snail Hydrobia ulvae, a small marine prosobranch densely present in rocky and soft-bottom habitats of the eastern Atlantic. A solution of 0.1 M TCA was tested on individuals treated according to two different protocols: (1) thawed after freezing ("non-dried") and (2) thawed and air-dried to a constant weight ("dried"). Two points were investigated in detail to improve the method: individual soft tissue dry weight and tissue metal concentration following a standard digestion method. In both instances, the results were compared with those from manually dissected snails. Conditions for total shell decalcification of 60 individuals (3-4 mm long) were 5.5 h in 20 ml of 0.1 M TCA.No differences in individual soft tissue weight were observed between the treatments, indicating good efficiency of the TCA extraction with respect to weight of soft body parts. In contrast, tissue metal concentrations varied among treatments. The TCA extraction of the dried animals had a good recovery for Cd, most likely due to the lower solubility of Cd vital cellular components (proteins and mineral concretions) from the dried tissue. Satisfactory recoveries of the tissue concentrations of Cu and Pb were obtained for the non-dried individuals. This might be related to the specific distribution of metals in the organism (namely in the digestive glands and gonads) and their different chemical reactivity with TCA after the tissue was dried. Limited susceptibility of Zn-bearing protein bindings to complexing with TCA also accounts for significantly lower concentrations of Zn in the mud snail's soft tissue that was extracted. The 0.1 M TCA solution is therefore recommended for extraction of the shells of Hydrobia ulvae for tissue determination of Cd, Cu and Pb; however the treatment protocol does affect metal recovery and thus a consistent procedure should be followed.The extracted metals from the soft tissues and shells of the mud snails (on the basis of both metal concentrations and contents) were ranked in order of increasing contribution of soft body parts to the total (shell+tissue): Pb相似文献   

Influence of the Surf Zone on the Marine Aerosol Concentration in a Coastal Area

Sea-salt aerosol concentrations in the coastal zone are assessed with the numerical aerosol-transport model MACMod that applies separate aerosol source functions for open ocean and the surf zone near the sea–land transition. Numerical simulations of the aerosol concentration as a function of offshore distance from the surf zone compare favourably with experimental data obtained during a surf-zone aerosol experiment in Duck, North Carolina in autumn 2007. Based on numerical simulations, the effect of variations in aerosol production (source strength) and transport conditions (wind speed, air–sea temperature difference), we show that the surf-zone aerosols are replaced by aerosols generated over the open ocean as the airmass advects out to sea. The contribution from the surf-generated aerosol is significant during high wind speeds and high wave events, and is significant up to 30 km away from the production zone. At low wind speeds, the oceanic component dominates, except within 1–5 km of the surf zone. Similar results are obtained for onshore flow, where no further sea-salt aerosol production occurs as the airmass advects out over land. The oceanic aerosols that are well-mixed throughout the boundary layer are then more efficiently transported inland than are the surf-generated aerosols, which are confined to the first few tens of metres above the surface, and are therefore also more susceptible to the type of surface (trees or grass) that determines the deposition velocity.     

Hydro-geomorphic hazards and impact of man-made structures during the catastrophic flood of June 2000 in the Upper Guil catchment (Queyras, Southern French Alps)

The Guil River Valley (Queyras, Southern French Alps) is prone to catastrophic floods, as the long historical archives and Holocene sedimentary records demonstrate. In June 2000, the upper part of this valley was affected by a “30-year” recurrence interval (R.I.) flood. Although of lower magnitude and somewhat different nature from that of 1957 (>100-year R.I. flood), the 2000 event induced serious damage to infrastructure and buildings on the valley floor. Use of methods including high-resolution aerial photography, multi-date mapping, hydraulic calculations and field observations made possible the characterisation of the geomorphic impacts on the Guil River and its tributaries. The total rainfall (260 mm in four days) and maximum hourly intensity (17.3 mm h⁻¹), aggravated by pre-existing saturated soils, explain the immediate response of the fluvial system and the subsequent destabilisation of slopes. Abundant water and sediment supply (landsliding, bank erosion), particularly from small catchment basins cut into slaty, schist bedrock, resulted in destructive pulses of debris flow and hyperconcentrated flows. The specific stream power of the Guil and its tributaries was greater than the critical stream power, thus explaining the abundant sediment transport. The Guil discharge was estimated as 180 m³ s⁻¹ at Aiguilles, compared to the annual mean discharge of 6 m³ s⁻¹ and a June mean discharge of 18 m³ s⁻¹. The impacts on the Guil valley floor (flooding, aggradation, generalised bank erosion and changes in the river pattern) were widespread and locally influenced by variations in the floodplain slope and/or channel geometry. The stream partially reoccupied former channels abandoned or modified in their geometry by various structures built during the last four decades, as exemplified by the Aiguilles case study, where the worst damage took place. A comparative study of the geomorphic consequences of both the 1957 and 2000 floods shows that, despite their poor maintenance, the flood control structures built after the 1957 event were relatively efficient, in contrast to unprotected places. The comparison also demonstrates the role of land-use changes (conversion from traditional agro-pastoral life to a ski/hiking-based economy, construction of various structures) in reducing the Guil channel capacity and, more generally, in increasing the vulnerability of the human installations. The efficiency of the measures taken after the 2000 flood (narrowing and digging out of the channel) is also assessed. Final evaluation suggests that, in such high mountainous environments, there is a need to keep most of the 1957 flooded zone clear of buildings and other structures (aside from the existing villages and structures of particular economic interest), in order to enable the river to migrate freely and to adjust to exceptional hydro-geomorphic conditions without causing major damage.     

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.     

Complex fluvial response to Lateglacial and Holocene allogenic forcing in the Lower Rhine Valley (Germany)

The Rhine catchment experienced strong changes in upstream allogenic forcing during the last 20,000 years. Climatic changes of the glacial–interglacial transition and steadily growing human impact during the second half of the Holocene forced the Rhine to adapt, resulting in changes in the fluvial morphology. The lower Rhine left two late Weichselian terraces and many Holocene palaeo-meanders in the Lower Rhine Valley (western Germany). This well-preserved terrace sequence is used to investigate the exact course of events of the lower Rhine response to changes in allogenic forcing. Five detailed cross-sections that integrate new and existing borehole data were constructed, and the deposits were analysed with regards to abandonment of terraces, changes in number of active channels, fluvial style, terrace gradients, and overbank sedimentation during the Lateglacial and Holocene. We improved and expanded the chronology of the Lower Rhine Valley deposits by dating new samples (¹⁴C, OSL), and integrated these with existing dating evidence (archaeological and historical data, cross-cutting relationships). Twice during the glacial–interglacial transition, the lower Rhine changed from braided to meandering fluvial style. During both transitional episodes (meandering) secondary channels existed alongside the main channel, with a life span up to 2500 years. The findings imply that the lower Rhine was inherently slow to complete the full morphological transition to a single thread meandering system. On specific aspects of response, the morphological response (point bar/terrace formation, contraction to a single thread) extended over relatively long periods of time, whereas discharge-related response (e.g. fluvial style change, abandonment of braidplains, channel bed lowering/incision) seems to have been near instantaneous. Reach-specific conditions determine the degree to which the geomorphic response is delayed and the complexity of the resultant morphology. Increased human-induced sediment delivery (last 2000–3000 years) is expressed as relative thicker and coarser overbank deposits in the entire study area. In the downstream part of the Lower Rhine Valley it accelerated high-stand deltaic backfilling and decreased incision. The response to human activities occurred relatively quickly in contrast to the long-term fluvial response to the glacial–interglacial transition, because the human impact mainly involved change in delivery of the suspended load.     

Climatological study of ionospheric irregularities over the European mid-latitude sector with GPS

High-frequency variability of the ionosphere, or irregularities, constitutes the main threat for real-time precise positioning techniques based on Global Navigation Satellite Systems (GNSS) measurements. Indeed, during periods of enhanced ionospheric variability, GNSS users in the field—who cannot verify the integrity of their measurements—will experience positioning errors that can reach several decimeters, while the nominal accuracy of the technique is cm-level. In the frame of this paper, a climatological analysis of irregularities over the European mid-latitude region is presented. Based on a 10 years GPS dataset over Belgium, the work analyzes the occurrence rate (as a function of the solar cycle, season and local time) as well as the amplitude of ionospheric irregularities observed at a single GPS station. The study covers irregularities either due to space weather events (solar origin) or of terrestrial origin. If space weather irregularities are responsible for the largest effects in terms of ionospheric error, their occurrence rate highly depends on solar activity. Indeed, the occurrence rate of ionospheric irregularities is about 9 % during solar maximum, whereas it drops to about 0 % during medium or low solar activity periods. Medium-scale ionospheric disturbances (MSTIDs) occurring during daytime in autumn/winter are the most recurrent pattern of the time series, with yearly proportions slightly varying with the solar cycle and an amplitude of about 10 % of the TEC background. Another recurrent irregularity type, though less frequent than MSTIDs, is the noise-like variability in TEC observed during summer nighttime, under quiet geomagnetic conditions. These summer nighttime irregularities exhibit amplitudes ranging between 8 and 15 % of the TEC background.