Offshore granulites from the Bay of Biscay margins: fission tracks constrain a Proterozoic to Tertiary thermal history

Zircon and apatite fission track ages were determined on granulites dredged along the Bay of Biscay margins. A sample from Ortegal Spur (Iberia margin) yielded 725 ± 67 Ma (zircon). A sample from Le Danois Bank (Iberia margin) yielded 284 ± 58 Ma (zircon), indicating post‐Variscan cooling. Apatite from this sample gave 52 ± 2 Ma, interpreted as final cooling after ‘Pyrenean’ thrust imbrication. Two other samples from Le Danois Bank have Early Cretaceous apatite ages (138 ± 7 and 120 ± 8 Ma), interpreted to result from exhumation during rifting. Finally, a granulite from Goban Spur (Armorican margin) gave 212 ± 10 Ma (apatite), coinciding with a precursory rifting phase. Together with published radiometric results, these data indicate a Precambrian high‐grade terrane at the site of the current margins. The distribution of the granulites on the seafloor reflects tectonic and erosional processes related to (a) Mesozoic rifting and (b) Early Tertiary incipient subduction of the Bay of Biscay beneath Iberia.     

Relationship between hydrocarbons and bacterial activity in mediterranean sediments: Part 2—hydrocarbon degrading activity of bacteria from sediments

In marine sediments from the Mediterranean coast polluted by oil spills (Etang de Berre) high bacterial activity is responsible for self-purification, samples collected from these areas showing a bacterial density several orders of magnitude higher than samples from non-polluted areas (Isle des Embiez). Between 60 and 80 % of the heterotrophic bacteria in the polluted areas are hydrocarbon-degrading, compared with 0.01 % in the non-polluted area.Several strains of hydrocarbon utilisers were isolated, a mixture of strains from each biotope was taken to represent a ‘biotope population’ and their activity towards different types of hydrocarbons (n-alkanes, iso-alkanes, cycloalkanes, aromatics) was determined.With ammonia as the nitrogen source the ‘biotope population’ from the polluted area degraded hydrocarbons much more readily than the ‘biotope population’ from the non-polluted area. With nitrate as the nitrogen source the degradation was much reduced, and, for some hydrocarbons, ceased in both ‘populations’.Individual hydrocarbons encouraged the growth of individual strains in the ‘biotope population’. In natural mixtures of hydrocarbons all strains grew well and degraded aliphatics. There was a good correlation between the respiratory activity of the ‘biotope population’ and the ability of the ‘population’ to utilise hydrocarbons for growth.     

The Record of an Extreme Flood in the Sediments of Montane Lillooet Lake, British Columbia: Implications for Paleoenvironmental Assessment

Severe rainfall in mid October, 2003 produced the largest floods in almost a century of record on rivers in the Cordillera of southwestern British Columbia. Sediment deposited in Lillooet Lake as a result of this event is clearly distinguished by stratigraphy, colour, texture, magnetic properties, and organic content. Each of these physical properties is related to the lacustrine processes, especially turbid underflow, that distributed the sediment through the lake. The flood, which lasted less than a week, delivered 8–12 times the amount of sediment that accumulates in most entire years in the deepest, central parts of the lake. Recognition of events of this type in the stratigraphic record offers a means of assessing the changing nature of extreme hydroclimatic events, and their relation to more ubiquitous, lower-energy processes.     

Spatially irregular sedimentation in a small, morphologically complex lake: implications for paleoenvironmental studies

A sub-bottom acoustic survey of Devil Lake on the Canadian Shield in southern Ontario reveals three acoustic facies: (I) a moderately acoustically transparent, laminated sequence interpreted as a glacilacustrine deposit in glacial Lake Iroquois or a subsequent phase in water depths up to 200 m greater than at present, (II) a transitional more transparent, less layered facies interpreted as being deposited in a more distal glacial lake from erosion of sediment in the watershed exposed by the failure of the ice dam and lowering of the glacial lake before stabilization by the development of forests, and (III) an acoustically transparent facies with similar transmissivity to the water column, interpreted as Holocene gyttja. Each is spatially variable in extent and thickness in response to those processes. There is only a very weak relation between sediment thickness and the water depth in which it was deposited. Wave processes prevent deposition in water depths less than about 6 m and evidence of erosion to the greatest depths of the lake (>40 m) is pervasive. The data demonstrate the value of acoustic survey in assessing lacustrine processes and the history of lakes, and the significance of such documentation in planning a coring program and in interpreting the results.     

The glacilacustrine sedimentary environment of Bowser Lake in the northern Coast Mountains of British Columbia, Canada

Bowser Lake, a fiord lake in the northern Coast Mountains of British Columbia, contains a thick Holocene fill consisting mainly of silt and clay varves. These sediments were carried into the lake by proglacial Bowser River which drains a high-energy, heavily glacierized basin. Sedimentation in the lake is controlled by seasonal snow and ice melt, by autumn rainstorms, and by rare, but very large jökulhlaups from glacier-dammed lakes in the upper Bowser River basin which complicate environmental inferences from the sedimentary record. Sediment is dispersed through the deep western part of the lake by energetic turbidity currents. The turbidity currents apparently do not overtop a sill that separates the western basin from much shallower areas to the east. Large amounts of silt and clay are deposited from suspension in the eastern part of the lake, but sediment accumulation rates there are much lower than to the west. Several strong acoustic reflectors punctuate the varved fill in the western basin; these may be thick or relatively coarse beds deposited during jökulhlaups or exceptionally large storms. The contemporary sediment yield to Bowser Lake, estimated from sediments in the lake, is about 360 t km^-2a^-1. This is a relatively high value, but it is less than yields insome other, similar montane basins with extensive snow and ice cover.The most likely explanation for the difference is that large amounts of sediment have been, and continue to be, stored on the Bowser delta andin small proglacial lakes.     

Bildung bromhaltiger Desinfektionsnebenprodukte nach Chlorung von Bodenseewasser in Abhängigkeit von Aufbereitungsschritten und der Bromidkonzentration

Formation of Brominated Disinfection By-products after Chlorination of Water from Lake Constance Depending on Treatment Steps and Bromide Concentration The formation of halogenated disinfection by-products (DNP) (trihalomethanes (THM), haloacetic acids (HES), haloacetonitriles (HAN), haloketones (HKE) and chloropicrin (TCNM)) was studied after chlorination (0.5 mg/L) of raw water and drinking water from Lake Constance. The objectives of this study were to investigate the effect of bromide ion on the distribution of DNP-species resulting from chlorination and to draw up a bromide mass-balance. The treatment of water from Lake Constance with ozone decreased the formation of DNP about 35% and of total organic halogens (AOX) about 45%. This decline in DNP-formation is mainly due to the formation of chloroform, dichloro- and trichloroacetic acid. Though there is only a small amount of bromide (6.2 μg/L) in water from Lake Constance, about 32% of THM, 16% of HES, and 30% of HAN contained bromine after chlorination of treated water. The addition of bromide ion (up to 1 mg/L) shifted the DNP-composition to more brominated species. The distribution of the DNP-species depends on the initial molar bromide-to-chlorine ratio. A mathematic model showed the same pattern of DNP-species depending on the initial molar bromide-to-chlorine ratio that was observed experimentally in microstrained raw water and drinking water from Lake Constance. After chlorination of microstrained raw water, 27% of the bromide were incorporated in known DNP, 34% in unknown substances, and about 39% of bromide were not converted to organic bromine. After chlorination of treated water, only 16% of the bromide were incorporated in unknown substances, whereas 34% were found in known DNP. About 50% were found as bromide again. After addition of bromide (up to 25 μg/L) to ozonated and treated water from Lake Constance, between 60 and 72% of the bromide that had reacted after chlorination were found in analyzed low-molecular DNP.     

The Okavango giant mafic dyke swarm (NE Botswana): its structural significance within the Karoo Large Igneous Province

The structural organization of a giant mafic dyke swarm, the Okavango complex, in the northern Karoo Large Igneous Province (LIP) of NE Botswana is detailed. This N110°E-oriented dyke swarm extends for 1500 km with a maximum width of 100 km through Archaean basement terranes and Permo-Jurassic sedimentary sequences. The cornerstone of the study is the quantitative analysis of N>170 (exposed) and N>420 (detected by ground magnetics) dykes evidenced on a ca. 80-km-long section lying in crystalline host-rocks, at high-angle to the densest zone of the swarm (Shashe area). Individual dykes are generally sub-vertical and parallel to the entire swarm. Statistical analysis of width data indicates anomalous dyke frequency (few data <5.0 m) and mean dyke thickness (high value of 17 m) with respect to values classically obtained from other giant swarms. Variations of mean dyke thicknesses from 17 (N110°E swarm) to 27 m (adjoining and coeval N70°E giant swarm) are assigned to the conditions hosting fracture networks dilated as either shear or pure extensional structures, respectively, in response to an inferred NNW–SSE extension. Both fracture patterns are regarded as inherited brittle basement fabrics associated with a previous (Proterozoic) dyking event. The Okavango N110°E dyke swarm is thus a polyphase intrusive system in which total dilation caused by Karoo dykes (estimated frequency of 87%) is 12.2% (6315 m of cumulative dyke width) throughout the 52-km-long projected Shashe section. Assuming that Karoo mafic dyke swarms in NE Botswana follow inherited Proterozoic fractures, as similarly applied for most of the nearly synchronous giant dyke complexes converging towards the Nuanetsi area, leads us to consider that the resulting triple junction-like dyke/fracture pattern is not a definitive proof for a deep mantle plume in the Karoo LIP.     

Stratigraphic status,age, and paleobathymetry of the Grey shale Member,Dalmiapuram Formation,Cauvery Basin,India

Grey shale Member of the Dalmiapuram Formation, Ariyalur Group, Cauvery Basin, India was studied for its stratigraphic position, age, and paleobathymetry with a re-look into the lithological relationship and foraminifer assemblages in the deepened limestone mine excavations at M/s Dalmia Cements, Dalmiapuram. Twenty grey shale samples from Kovandankurchchi (pit-4) and Kallakkudi mines yielded diversified calcareous, benthic, and rare index planktic foraminifera. The foraminiferal assemblages suggest a latest Albian age and middle neritic depositional conditions. The abundance of kaolinite and smectite clay minerals relate to warm/humid climate which corroborate with rising relative sea level during grey shale deposition. The grey shale occurs in patches within the marl bedded limestone member which exhibits cyclic deposition of limestone and marl. The limestone mine sections demonstrate that the grey shale forms part of basal marl bedded limestone, directly overlying the coral algal limestone. The present study demonstrates that the grey shale outcrops in Dalmiapuram Formation should be placed stratigraphically as part of marl bedded limestone. The member status for grey shale which is current usage stands discounted.