Surface geochemistry at Roosevelt Springs Kgra, Utah

As part of a research program conducted on behalf of the Department of Energy, available data on the Roosevelt Springs KGRA were synthesized to determine the spatial arrangement of the rocks, and the patterns of mass and energy flow within them. The resulting model led to a new interpretation of the geothermal system, and provided “ground truth” for evaluating the application of soil geochemistry to exploration for concealed geothermal fields. Preliminary geochemical studies comparing the surface micro-layer to conventional soil sampling methods indicated both practical and chemical advantages for the surface micro-layer technique.The elements arsenic, antimony and cesium in the surface microlayer samples in particular, gave a strong expression of one of the principal faults in the geothermal field. In contrast the analysis of soil samples from only 20 cm below the surface gave little or no expression of the geothermal field.As a consequence, the surface micro-layer was the chosen sampling medium for the second field program, which entailed the collection of a total of some 300 samples on both a regional and detailed pattern covering about 250 km². These samples were subsequently analyzed by a variety of methods yielding data on 41 elements and ions.Computer contouring revealed that, on a single-element basis, cesium, antimony and arsenic provided the best expression of the KGRA, and indicated other interesting areas of geothermal leakage. Elements such as beryllium and lithium, which are present in highly anomalous concentrations in the opaline sinter deposited by geothermal leakage, do not have an expression in the overlying soils or the surface micro-layer. Computer manipulation of the multi-element data using R-mode factor analysis provided the optimum method of interpretation of the surface micro-layer data. A single factor in which the principal contributors were arsenic, antimony and cesium provided the best indication of the leakage of geothermal solutions within the KGRA. Anomalies in the Escalante Desert to the west of the geothermal field are associated with the trace of a fault zone, and may, therefore, be an activity. Trend surface analysis of the soil mercury data has indicated a regional high in this element in the Mineral Mountains to the east of the KGRA, which may indicate the position of a dry heat source at depth.These data demonstrate that surface micro-layer sampling on a regional scale can serve as a prospecting tool for geothermal resource areas. However, it is possible that the optimum pathfinder elements may vary with the nature of heat source, the geochemistry of the local rocks and the local surficial environment. It is therefore recommended that a multi-element approach should be adopted, with subsequent computer processing of the data.     

Eclogite xenoliths from stockdale kimberlite,Kansas

Six kimberlite pipes of late Cretaceous or Tertiary age occur in Riley Co., east-central Kansas. Within the pipes xenoliths of local sedimentary and exotic igneous rocks are common, especially in the Stockdale pipe. Igneous rocks which occur as xenoliths include granite, gabbro, metagabbro, pyroxenite and eclogite. In the eclogites omphacitic clinopyroxene (approx. Di₅₂Jd₂₄mol%) and pyropic garnet (approx. Py₄₇Al₃₅Gr₁₂mol%) are the predominant minerals with subordinate amounts of rutile and sulphides (pyrrotite-pentlandite (?)-chalcopyrite). Interstitial kaersutitic amphibole is a minor constituent. The eclogites are chemically equivalent to olivine-basalt. The texture, composition and mineralogy of the eclogites from Kansas are similar to those of eclogites from kimberlite pipes in South Africa and Siberia. Whereas the rocks from these latter localities display a range in composition, those examined to date from Kansas are of fairly restricted composition. Furthermore it seems probable that the eclogites from Stockdale formed under limited P-T conditions within the mantle. This is the first record of such eclogites on the North American continent.     

The turbulent wind flow over an embankment

Under neutral conditions and with low winds, profiles of mean and turbulent wind components have been measured at various points across an embankment with aspect ratio 0.3. These measurements have been compared with and related to those of undisturbed flow in a horizontal homogeneous area on the windward side. The speed-up ratio, the turbulent and mean kinetic energy and the turbulent shear stress are examined. It is found that the flow stagnates on the windward side, accelerates above the crest, and separates behind the crest. The results show a remarkable dependence on the angle of attack. With an angle smaller than 90 °, the influence of the embankment on the mean wind field is reduced but is increased on the turbulent part, as lateral gustiness components are amplified. With the incoming flow normal to the embankment, maximum turbulence is found on the top of the ridge near the surface but at greater heights farther downwind. The same is true for the shear stress, but only for oblique flow, whereas for normal flow a minimum is found above the crest and a maximum on the windward side. Therefore, with varying angle of attack the embankment acts in different ways on mean wind, turbulent kinetic energy, and turbulent stress. Although the winds were low, all effects are clearly evident in the data.     

Threshold of tolerance model: strategy for international travel

The purpose of this research is to investigate what factors influence the management of International Business Air Travel (IBAT). The researchers interviewed 34 business travellers, travel organisers and executives involved in IBAT from ten organisations in differing industries, in Australia. It was found that there are a multitude of factors influencing IBAT management, including professionalism and job satisfaction of travellers and the achievement of organisational goals such as carrying out successful international ventures or operating effectively in international markets. From the findings a strategic model was developed called the Threshold of Tolerance Model—which illustrates the potential point where both organisational goals are most likely to be met and where IBAT is most likely to be well managed for both travellers and organisations.     

Fern species richness and abundance are indicators of climate change on high-elevation islands: evidence from an elevational gradient on Tahiti (French Polynesia)

Coastal sector impacts from sea level rise (SLR) are a key component of the projected economic damages of climate change, a major input to decision-making and design of climate policy. Moreover, the ultimate global costs to coastal resources will depend strongly on adaptation, society’s response to cope with the local impacts. This paper presents a new open-source optimization model to assess global coastal impacts from SLR from the perspective of economic efficiency. The Coastal Impact and Adaptation Model (CIAM) determines the optimal strategy for adaptation at the local level, evaluating over 12,000 coastal segments, as described in the DIVA database (Vafeidis et al. 2006), based on their socioeconomic characteristics and the potential impacts of relative sea level rise and uncertain sea level extremes. A deterministic application of CIAM demonstrates the model’s ability to assess local impacts and direct costs, choose the least-cost adaptation, and estimate global net damages for several climate scenarios that account for both global and local components of SLR (Kopp et al. 2014). CIAM finds that there is large potential for coastal adaptation to reduce the expected impacts of SLR compared to the alternative of no adaptation, lowering global net present costs through 2100 by a factor of seven to less than $1.7 trillion, although this does not include initial transition costs to overcome an under-adapted current state. In addition to producing aggregate estimates, CIAM results can also be interpreted at the local level, where retreat (e.g., relocate inland) is often a more cost-effective adaptation strategy than protect (e.g., construct physical defenses).     

Scientific detector workshop 2022 on-sky performance verification of near-infrared e−APD technology for wavefront sensing and demonstration of e−APD pixel performance to improve the sensitivity of large science focal planes

Near-infrared adaptive optics as well as fringe tracking for coherent beam combination in optical interferometry require the development of high-speed sensors. Because of the high speed, a large analog bandwidth is required. The short exposure times result in small signal levels which require noiseless detection. Both requirements cannot be met by state-of-the-art conventional CMOS technology of near-infrared arrays as has been attempted previously. A total of five near-infrared SAPHIRA 320 × 256 pixel HgCdTe e⁻APD arrays have been deployed in the wavefront sensors and in the fringe tracker of the VLTI instrument GRAVITY. The current limiting magnitude for coherent exposures with GRAVITY is m_k = 19, which is made possible with ADP technology. New avalanche photo-diode array (APD) developments since GRAVITY include the extension of the spectral sensitivity to the wavelength range from 0.8 to 2.5 μm. After GRAVITY a larger format array with 512 × 512 pixels has been developed for both AO applications at the ELT and for long integration times. Since dark currents of <10⁻³ e⁻/s have been demonstrated with 1Kx1K e⁻APD arrays and 2Kx2K e⁻APD arrays have already been developed, the possibilities and adaptations of e⁻APD technology to provide noiseless large-format science-grade arrays for long integration times are also discussed.