Two-step deglaciation: 14C-Dated high-resolution δ18O records from the tropical Atlantic Ocean

Eight box cores from the tropical Atlantic were studied in detail with regard to foraminiferal oxygen isotopes, radiocarbon, and Globorotalia menardii abundance. A standard Atlantic oxygen-isotope signal was reconstructed for the last 20,000 yr. It is quite similar to the west-equatorial Pacific signal published previously. Deglaciation is seen to occur in two steps which are separated by a pause. Onset of deglaciation is after 15,000 yr B.P. The pause is centered between 11,000 and 12,000 yr B.P., but may be correlative with the Younger Dryas (10,500 yr B.P.) if allowance is made for a scale shift due to mixing processes on the sea floor. Step 2 is centered near 10,000 yr B.P. and is followed by a brief excursion toward light oxygen values. This excursion (the M event) may correlate with the Gulf of Mexico meltwater spike.     

Deep inside a neoproterozoic intra-oceanic arc: growth,differentiation and exhumation of the Amalaoulaou complex (Gourma,Mali)

We show here that the Amalaoulaou complex, in the Pan-African belt of West Africa (Gourma, Mali), corresponds to the lower and middle sections of a Neoproterozoic intra-oceanic arc. This complex records a 90–130-Ma-long evolution of magmatic inputs and differentiation above a subducting oceanic slab. Early c. 793 Ma-old metagabbros crystallised at lower crustal or uppermost mantle depths (25–30 km) and have geochemical characteristic of high-alumina basalts extracted from a depleted mantle source slightly enriched by slab-derived sedimentary components ((La/Sm)_N < 1; ε_Nd: +5.4–6.2; ⁸⁷Sr/⁸⁶Sr: 0.7027–0.7029). In response to crustal thickening, these mafic rocks were recrystallised into garnet-granulites (850–1,000°C; 10–12 kbar) and subject to local dehydration–melting reactions, forming trondhjemititic leucosomes with garnet–clinopyroxene–rutile residues. Slightly after the granulitic event, the arc root was subject to strong HT shearing during partial exhumation (detachment faults/rifting or thrusting), coeval with the emplacement of spinel- and garnet-pyroxenite dykes crystallised from a high-Mg andesitic parental magma. Quartz and hornblende-gabbros (700–660 Ma) with composition typical of hydrous volcanic rocks from mature arcs ((La/Sm)_N: 0.9–1.8; ε_Nd: +4.6 to +5.2; ⁸⁷Sr/⁸⁶Sr: 0.7028–0.7031) were subsequently emplaced at mid-arc crust levels (~15 km). Trace element and isotopic data indicate that magmas tapped a depleted mantle source significantly more enriched in oceanic sedimentary components (0.2%). Exhumation occurred either in two stages (700–660 and 623 Ma) or in one stage (623 Ma) with a final exhumation of the arc root along cold P-T path (550°C, 6–9 kbar; epidote–amphibolite and greenschist facies conditions) during the main Pan-African collision event (620–580 Ma). The composition of magmas forming the Cryogenian Amalaoulaou arc and the processes leading to intra-arc differentiation are strikingly comparable to those observed in the deep section of exposed Mezosoic oceanic arcs, namely the Kohistan and Talkeetna complex. This evolution of the Amalaoulaou oceanic arc and its accretion towards the West African craton belong to the life and closure of the Pharusian Ocean that eventually led to the formation of the Greater Gondwana supercontinent, a similar story having occurred on the other side of the Sahara with the Mozambique Ocean.     

3-D assessment of peak-metamorphic conditions by Raman spectroscopy of carbonaceous material: an example from the margin of the Lepontine dome (Swiss Central Alps)

This study monitors regional changes in the crystallinity of carbonaceous matter (CM) by applying Micro-Raman spectroscopy to a total of 214 metasediment samples (largely so-called Bündnerschiefer) dominantly metamorphosed under blueschist- to amphibolite-facies conditions. They were collected within the northeastern margin of the Lepontine dome and easterly adjacent areas of the Swiss Central Alps. Three-dimensional mapping of isotemperature contours in map and profile views shows that the isotemperature contours associated with the Miocene Barrow-type Lepontine metamorphic event cut across refolded nappe contacts, both along and across strike within the northeastern margin of the Lepontine dome and adjacent areas. Further to the northeast, the isotemperature contours reflect temperatures reached during the Late Eocene subduction-related blueschist-facies event and/or during subsequent near-isothermal decompression; these contours appear folded by younger, large-scale post-nappe-stacking folds. A substantial jump in the recorded maximum temperatures across the tectonic contact between the frontal Adula nappe complex and surrounding metasediments indicates that this contact accommodated differential tectonic movement of the Adula nappe with respect to the enveloping Bündnerschiefer after maximum temperatures were reached within the northern Adula nappe, i.e. after Late Eocene time.     

Footwall mineralization during Late Miocene extension along the West Cycladic Detachment System,Lavrion, Greece

The West Cycladic Detachment System (WCDS) has been mapped from the western Cycladic islands to Lavrion (mainland Greece), where several top‐to‐SSW low‐angle normal faults at different structural levels are observed. Near the detachment horizon, hydrothermal fluid flow originating from Miocene intrusions lead to high‐temperature carbonate strata‐bound Pb–Ag–Zn ore deposits. Zircon (U–Th)/He cooling ages from the mineralized footwall are 7.1 ± 0.6 to 7.9 ± 0.6 Ma. Carbon‐ and O‐isotope analyses of the carbonate host indicate high water‐to‐rock ratios during brittle deformation‐induced metasomatism, and that this interaction, unrelated to proximity of the intrusions, plays the dominant role in the mineralization. The Late Miocene geology of Lavrion is strikingly similar to Serifos island on the SE termination of the WCDS, both characterized by strong localization of detachment faulting and the interaction of brittle deformation with the injection of fluids related to granitoid intrusions.     

Eocene-Pliocene time scale and stratigraphy of the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB)

We present a general stratigraphic synthesis for the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene times. The stratigraphic data were compiled both from literature and from research carried out by the authors during the past 6 years ; an index of the stratigraphically most important localitites is provided. We distinguish 14 geographical areas from the Helvetic domain in the South to the Hanau Basin in the North. For each geographical area, we give a synthesis of the biostratigraphy, lithofacies, and chronostratigraphic ranges. The relationships between this stratigraphic record and the global sea-level changes are generally disturbed by the geodynamic (e.g., subsidence) evolution of the basins. However, global sea-level changes probably affected the dynamic of transgression–regression in the URG (e.g., Middle Pechelbronn Beds and Serie Grise corresponding with sea-level rise between Ru1/Ru2 and Ru2/Ru3 sequences, respectively) as well as in the Molasse basin (regression of the UMM corresponding with the sea-level drop at the Ch1 sequence). The URGENT-project (Upper Rhine Graben evolution and neotectonics) provided an unique opportunity to carry out and present this synthesis. Discussions with scientists addressing sedimentology, tectonics, geophysics and geochemistry permitted the comparison of the sedimentary history and stratigraphy of the basin with processes controlling its geodynamic evolution. Data presented here back up the palaeogeographic reconstructions presented in a companion paper by the same authors (see Berger et al. in Int J Earth Sci 2005).     

Packing states of ideal reservoir sands: Insights from simulation of porosity reduction by grain rearrangement

The question being tackled in this study is to which extent grain rearrangement contributes to porosity reduction in very well sorted quartzose sands (ideal reservoir sands). A numerical model, RAMPAGE (an acronym of random packing generator), has been developed to address this long-standing problem. RAMPAGE represents a synthesis of various algorithms designed to simulate packing of equal-sized spheres, which have been used to represent ideal solids, liquids, and gases, as well as natural porous media. The results of RAMPAGE simulations compare favourably to theoretical and experimental data from various disciplines and allow delineation of the field of gravitationally stable random packing of equal-sized spheres in the 2-D state space of porosity (P) versus mean coordination number (N). Three end-member packing states have been identified: random loose packing (RLP: P = 45.4%, N = 5.2), random close packing (RCP: P = 36.3%, N = 7.0), and bridged random close packing (Bridged RCP: P = 39.5%, N = 5.2). Unlike previously proposed models, RAMPAGE can simulate the transition from RLP to any other point in the stability field. The RLP state is fully consistent with wet-packed porosities of synthetic sands with lognormal mass-size distributions reported in the literature. The much higher in-situ porosity values reported for modern (air-packed) sands are unlikely to be preserved at depth on geological time scales. Data on the relation between intergranular volume and burial depth indicate that the observed intergranular volume reduction in the upper ~ 800 m of the sediment column corresponds to the evolution of RLP to RCP, and is thus fully explained by non-destructive grain rearrangement.     

Differences in grain growth of calcite: a field-based modeling approach

Normal grain growth of calcite was investigated by combining grain size analysis of calcite across the contact aureole of the Adamello pluton, and grain growth modeling based on a thermal model of the surroundings of the pluton. In an unbiased model system, i.e., location dependent variations in temperature-time path, 2/3 and 1/3 of grain growth occurs during pro- and retrograde metamorphism at all locations, respectively. In contrast to this idealized situation, in the field example three groups can be distinguished, which are characterized by variations in their grain size versus temperature relationships: Group I occurs at low temperatures and the grain size remains constant because nano-scale second phase particles of organic origin inhibit grain growth in the calcite aggregates under these conditions. In the presence of an aqueous fluid, these second phases decay at a temperature of about 350 °C enabling the onset of grain growth in calcite. In the following growth period, fluid-enhanced group II and slower group III growth occurs. For group II a continuous and intense grain size increase with T is typical while the grain growth decreases with T for group III. None of the observed trends correlate with experimentally based grain growth kinetics, probably due to differences between nature and experiment which have not yet been investigated (e.g., porosity, second phases). Therefore, grain growth modeling was used to iteratively improve the correlation between measured and modeled grain sizes by optimizing activation energy (Q), pre-exponential factor (k₀) and grain size exponent (n). For n=2, Q of 350 kJ/mol, k₀ of 1.7×10²¹ mⁿs^–1 and Q of 35 kJ/mol, k₀ of 2.5×10^-5 mⁿs^–1 were obtained for group II and III, respectively. With respect to future work, field-data based grain growth modeling might be a promising tool for investigating the influences of secondary effects like porosity and second phases on grain growth in nature, and to unravel differences between nature and experiment.Editorial responsibility: J. Hoefs     

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.