Volcanic ash detection by GPS signal

We investigate the ability of GPS to detect volcanic plumes at Mt. Etna, Italy. We use a robust statistical approach to highlight whether the presence of a volcanic plume in the atmosphere may really affect the GPS undifferenced post-fit phase residuals. The proposed method has been tested for the September 4–5, 2007 activity of Mt. Etna. This eruption produced powerful lava fountains forming a weak, a few kilometers high plume for several hours, representing typical activity at Etna over the last 5 years. We analyzed data from nineteen Etna permanent GPS stations located on the volcano flanks at different heights and applied a statistical test based on four main steps: (a) realization of a simplified model representing the volcanic plume in atmosphere; (b) evaluation of the GPS satellite and station couples intersecting the plume; (c) calculation of the volcanic plume region crossed by the GPS signal; (d) application of a robust statistical test in order to see whether the volcanic plume affected the GPS signals. Results show that during the September 4–5, 2007 explosive activity, the GPS residuals definitely include the contribution of the volcanic plume. Our analysis shows that values of the GPS residuals are ten times smaller than those found for the Miyakejima eruption (Japan), highlighting a likely relationship between residuals and eruption intensity. In the future, data derived from the GPS stations located on Etna’s flanks could be used to improve the alerting system of volcanic ash, already operating at the Istituto Nazionale di Geofisica e Vulcanologia, Osservatorio Etneo.     

The sudden stratospheric warming and chemical ozone loss in the Antarctic winter 2019: comparison with the winters of 1988 and 2002

Theoretical and Applied Climatology - Sudden stratospheric warmings (SSWs) are associated with rapid rise in temperature in a short period of time in the polar vortex and reversal of the zonal...     

It starts at home? Climate policies targeting household consumption and behavioral decisions are key to low-carbon futures

Through their consumption behavior, households are responsible for 72% of global greenhouse gas emissions. Thus, they are key actors in reaching the 1.5 °C goal under the Paris Agreement. However, the possible contribution and position of households in climate policies is neither well understood, nor do households receive sufficiently high priority in current climate policy strategies. This paper investigates how behavioral change can achieve a substantial reduction in greenhouse gas emissions in European high-income countries. It uses theoretical thinking and some core results from the HOPE research project, which investigated household preferences for reducing emissions in four European cities in France, Germany, Norway and Sweden. The paper makes five major points: First, car and plane mobility, meat and dairy consumption, as well as heating are the most dominant components of household footprints. Second, household living situations (demographics, size of home) greatly influence the household potential to reduce their footprint, even more than country or city location. Third, household decisions can be sequential and temporally dynamic, shifting through different phases such as childhood, adulthood, and illness. Fourth, short term voluntary efforts will not be sufficient by themselves to reach the drastic reductions needed to achieve the 1.5 °C goal; instead, households need a regulatory framework supporting their behavioral changes. Fifth, there is a mismatch between the roles and responsibilities conveyed by current climate policies and household perceptions of responsibility. We then conclude with further recommendations for research and policy.     

The Hellenic ophiolites: eastward or westward obduction of the Maliac Ocean, a discussion

Ophiolitic bodies in the Dinaro-Hellenic mountain belt are among the most important ones in the Peri-Mediterranean Alpine chains. The characteristic feature of this ophiolitic belt is its Middle to Late Jurassic age of obduction. The ophiolitic bodies form two major belts on each side of the Pelagonian zone: an east Pelagonian belt in the Vardarian domain and a Supra-Pelagonian ophiolitic belt (SPO) to the west. The different hypotheses relative to the origin of the SPO present geodynamic evolution models accounting for most of the available data: a mid-Triassic episode of rifting; a Ladinian–Jurassic episode of sea-floor spreading forming notably the Maliac Ocean; a Middle to Late Jurassic convergent period with subduction and obduction episodes, and finally, a late episode of Tertiary compressional deformation responsible for the westward thrusting of the Jurassic ophiolitic nappes over the external zones. Despite many studies dating from the early 1970s, the eastern or western Pelagonian origin of these ophiolites, especially the SPO, is still under dispute. Whatever the adopted hypothesis, we consider that the main SPO bodies (N-Pindos, Vourinos, Othris, Evia, Argolis) have the same origin because of their geographic continuity and of the similarities in their geological characteristics. We propose that this ocean corresponds everywhere to the Maliac Ocean, defined in Othris from the well-preserved sedimentary (oceanic margin) and ophiolitic nappes thrust during the Late Jurassic obduction onto the Pelagonian platform. There is strong evidence for the existence of two deep basins on both sides of the Pelagonian continental ridge during Triassic–Jurassic times. They correspond, respectively, to the Vardar area to the east and the Pindos domain to the west, one of these domains being at the origin of the SPO. The hypothesis of an eastward emplacement of the SPO from the Pindos domain is based mainly on sedimentological data from the margin series and on structural analyses of ophiolitic bodies. However, we conclude the westward obduction of the Maliac Ocean, originating from the Vardar area, to be the best fitting model. This westward model is supported by paleogeographic and structural constraints on regional scale. Notably, the absence of obducted ophiolites in the Jurassic series of the Koziakas units (units attributed to the western Pelagonian margin) and of the Parnassus domain (on the eastern side of the Pindos basin) is difficult to reconcile with an eastward obduction from the Pindos domain. Other observations, such as the distribution of ophiolitic detritus in the internal and external zones, also promote the westward Late Jurassic obduction of the Maliac Ocean. Our preferred model offers a consistent explanation for the mechanism and timing of the emplacement of the SPO, as well as providing insight on the origin and emplacement of the Vardarian ophiolites. Following this hypothesis, there is no need for a clear boundary between the SPO and the west Vardarian ophiolitic bodies as they were obducted from the same oceanic basin and during the same Jurassic tectonic event. In this paper, we develop evidence in favor of the eastern Pelagonian origin for the SPO (our adopted model) and provide discussion on the data supporting the main alternative hypothesis (western origin for the SPO).     

Morphological similarities between DBM and a microeconomic model of sprawl

We present a model that simulates the growth of a metropolitan area on a 2D lattice. The model is dynamic and based on microeconomics. Households show preferences for nearby open spaces and neighbourhood density. They compete on the land market. They travel along a road network to access the CBD. A planner ensures the connectedness and maintenance of the road network. The spatial pattern of houses, green spaces and road network self-organises, emerging from agents individualistic decisions. We perform several simulations and vary residential preferences. Our results show morphologies and transition phases that are similar to Dieletric Breakdown Models (DBM). Such similarities were observed earlier by other authors, but we show here that it can be deducted from the functioning of the land market and thus explicitly connected to urban economic theory.     

High-temperature emplacement of the Cerro Galán and Toconquis Group ignimbrites (Puna plateau,NW Argentina) determined by TRM analyses

Estimates of pyroclastic flow emplacement temperatures in the Cerro Galán ignimbrite and Toconquis Group ignimbrites were determined using thermal remanent magnetization of lithic clasts embedded within the deposits. These ignimbrites belong to the Cerro Galán volcanic system, one of the largest calderas in the world, in the Puna plateau, NW Argentina. Temperature estimates for the 2.08-Ma Cerro Galán ignimbrite are retrieved from 40 sites in 14 localities (176 measured clasts), distributed at different distances from the caldera and different stratigraphic heights. Additionally, temperature estimates were obtained from 27 sample sites (125 measured clasts) from seven ignimbrite units forming the older Toconquis Group (5.60–4.51 Ma), mainly outcropping along a type section at Rio Las Pitas, Vega Real Grande. The paleomagnetic data obtained by progressive thermal demagnetization show that the clasts of the Cerro Galán ignimbrite have one single magnetic component, oriented close to the expected geomagnetic field at the time of emplacement. Results show therefore that most of the clasts acquired a new magnetization oriented parallel to the magnetic field at the moment of the ignimbrite deposition, suggesting that the clasts were heated up to or above the highest blocking temperature (T _b) of the magnetic minerals (T _b = 580°C for magnetite; T _b = 600–630°C for hematite). We obtained similar emplacement temperature estimations for six out of the seven volcanic units belonging to the Toconquis Group, with the exception of one unit (Lower Merihuaca), where we found two distinct magnetic components. The estimation of emplacement temperatures in this latter case is constrained at 580–610°C, which are lower than the other ignimbrites. These estimations are also in agreement with the lowest pre-eruptive magma temperatures calculated for the same unit (i.e., 790°C; hornblende–plagioclase thermometer; Folkes et al. 2011b). We conclude that the Cerro Galán ignimbrite and Toconquis Group ignimbrites were emplaced at temperatures equal to or higher than 620°C, except for Lower Merihuaca unit emplaced at lower temperatures. The homogeneity of high temperatures from proximal to distal facies in the Cerro Galán ignimbrite provides constraints for the emplacement model, marked by a relatively low eruption column, low levels of turbulence, air entrainment, surface–water interaction, and a high level of topographic confinement, all ensuring minimal heat loss.     

Earth-Affecting Solar Causes Observatory (EASCO): A potential International Living with a Star Mission from Sun–Earth L5

This paper describes the scientific rationale for an L5 mission and a partial list of key scientific instruments the mission should carry. The L5 vantage point provides an unprecedented view of the solar disturbances and their solar sources that can greatly advance the science behind space weather. A coronagraph and a heliospheric imager at L5 will be able to view CMEs broadsided, so space speed of the Earth-directed CMEs can be measured accurately and their radial structure discerned. In addition, an inner coronal imager and a magnetograph from L5 can give advance information on active regions and coronal holes that will soon rotate on to the solar disk. Radio remote sensing at low frequencies can provide information on shock-driving CMEs, the most dangerous of all CMEs. Coordinated helioseismic measurements from the Sun–Earth line and L5 provide information on the physical conditions at the base of the convection zone, where solar magnetism originates. Finally, in situ measurements at L5 can provide information on the large-scale solar wind structures (corotating interaction regions (CIRs)) heading towards Earth that potentially result in adverse space weather.     

Effects of turbulence on the transport of individual particles as bedload in a gravel‐bed river

This study investigates the association between mean and turbulent flow variables and the movement of individual particles in a gravel‐bed river. The experimental design implemented in the Eaton‐North River (Québec, Canada) is based on the simultaneous observations at a high temporal resolution of both particle movements as bedload using an underwater video camera and of the streamwise and vertical flow velocity components using a vertical array of three electromagnetic current meters (ECMs). The frequency and distance of displacement of particles larger than 20 mm that were sliding or rolling on the bed were measured from a 10 minutes long film. Mean and turbulent flow properties obtained for periods without sediment transport are compared to those when particles were sliding and rolling. When particles are sliding, weak differences are present for the mean streamwise velocity and normal vertical stresses. Instantaneous Reynolds shear stresses are significantly lower for sliding events which was not expected but could be explained by the important dominance of Quadrant 3 events (inward interactions). When particles are rolling, only the vertical normal stresses show a weak difference from those observed in the absence of transport but they tend to occur when Quadrant 2 (ejections) dominate the flow field. For both sliding and rolling particles, vertical and/or streamwise fluid accelerations show high magnitude values when compared to periods without transport. For sliding particles, streamwise acceleration is mostly negative and combines most of the time with a positive vertical acceleration. For rolling particles, streamwise and vertical acceleration are predominantly of opposite sign. These results suggest that fluid acceleration or deceleration in the streamwise and vertical directions is affecting the pressure field around particles. In this study, fluid acceleration seems to play a more important role than Reynolds shear stress or normal stresses for bedload movements. Copyright © 2010 John Wiley & Sons, Ltd.     

Polybrominated diphenyl ethers and their methoxylated analogs in mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) from Bizerte Lagoon, Tunisia

Concentrations of ten polybrominated diphenyl ethers (PBDEs) and eight methoxylated polybrominated diphenyl ethers (MeO-PBDEs) in mullet (Mugil cephalus) and sea bass (Dicentrarchus labrax) collected from the Bizerte Lagoon and the Mediterranean Sea were investigated. To the best of our knowledge, this is the first report of these compounds in marine fishes from Tunisia. The PBDE mean concentrations in fish from Bizerte Lagoon were 45.3 and 96.2 ng g(-1) lw respectively in mullet and sea bass, while the concentrations of these compounds in mullet and sea bass from Mediterranean Sea were 7.80 and 27.9 ng g(-1) lw respectively. MeO-PBDE concentrations in mullet and sea bass from Bizerte Lagoon ranged from 6.46 to 286 ng g(-1) lw and from 49.4 to 798 ng g(-1) lw respectively, while the concentrations of these compounds in mullet and sea bass from Mediterranean Sea ranged from 190 to 401 ng g(-1) lw and from 353 to 578 ng g(-1) lw respectively. The total PBDEs and total MeO-PBDEs concentration in fish from Bizerte Lagoon were similar or slightly lower than those reported for other species from other locations around the world.     

TomograPy: A Fast, Instrument-Independent, Solar Tomography Software

Solar tomography has progressed rapidly in recent years thanks to the development of robust algorithms and the availability of more powerful computers. It can today provide crucial insights in solving issues related to the line-of-sight integration present in the data of solar imagers and coronagraphs. However, there remain challenges such as the increase of the available volume of data, the handling of the temporal evolution of the observed structures, and the heterogeneity of the data in multi-spacecraft studies. We present a generic software package that can perform fast tomographic inversions that scales linearly with the number of measurements, linearly with the length of the reconstruction cube (and not the number of voxels), and linearly with the number of cores and can use data from different sources and with a variety of physical models: TomograPy ( http://nbarbey.github.com/TomograPy/ ), an open-source software freely available on the Python Package Index. For performance, TomograPy uses a parallelized-projection algorithm. It relies on the World Coordinate System standard to manage various data sources. A variety of inversion algorithms are provided to perform the tomographic-map estimation. A test suite is provided along with the code to ensure software quality. Since it makes use of the Siddon algorithm it is restricted to rectangular parallelepiped voxels but the spherical geometry of the corona can be handled through proper use of priors. We describe the main features of the code and show three practical examples of multi-spacecraft tomographic inversions using STEREO/EUVI and STEREO/COR1 data. Static and smoothly varying temporal evolution models are presented.