Measuring surface-layer fluxes of heat and momentum using optical scintillation

An experiment is described showing that an optical scintillation instrument gives reliable values of heat and momentum fluxes in the surface layer, subject to the usual restrictions of homogeneity and steady state. This instrument measures the turbulence inner scale and refractive-index structure parameter, which are used to obtain the fluxes from Monin-Obukhov similarity relationships. The instrument gives space-averaged values over a propagation path that can range in length from tens to hundreds of meters. The history of the use of optical propagation to estimate fluxes is reviewed.     

青藏高原东北部天然地震探测与岩石圈深部特征

为了研究青藏高原东北部块体构造变形的深部驱动机制, 笔者对青藏高原东北部的天然地震观测数据进行地震层析反演,并结合同一剖面的接收函数及各向异性结果进行讨论 .介绍了ACH方法的基本原理,论述了由于印度板块向北俯冲的强大的持续作用力,造就了NE向俯冲到柴达木盆地之下的昆仑造山带,并发现在巴颜喀拉地体下方壳幔内的仰冲活动.壳幔内的低速体十分显著地出现在阿尼玛卿缝合线以北,深度可达300 km.推断该低速体可能与昆仑断裂在深层的剪切作用有关.深部资料显示该区莫霍界面由北向南逐渐加深,这与青藏高原东北部的岩石圈减薄现象一致,而且与印度板块向北运动的远程效应有关 .另外,地震层析结果及各向异性分析也支持青藏高原东北部主应力方向转为NE向的观点.     

Accounting for Spatial Uncertainty in Optimization with Spatial Decision Support Systems

Spatial decision support systems (SDSS) are designed to make complex resource allocation problems more transparent and to support the design and evaluation of allocation plans. Recent developments in this field focus on the design of allocation plans using optimization techniques. In this paper we analyze how uncertainty in spatial (input) data propagates through, and affects the results of, an optimization model. The optimization model calculates the optimal location for a ski run based on a slope map, which is derived from a digital elevation model (DEM). The uncertainty propagation is a generic method following a Monte Carlo approach, whereby realizations of the spatially correlated DEM error are generated using 'sequential Gaussian simulation'. We successfully applied the methodology to a case study in the Austrian Alps, showing the influence of spatial uncertainty on the optimal location of a ski run and the associated development costs. We also discuss the feasibility of routine incorporation of uncertainty propagation methodologies in an SDSS.     

Oxygen-containing functional groups in land-derived humic acids—II. Changes in the oxygen distribution of humic acids during early diagenesis as revealed by derivatization methods

Extensive functional group analyses were performed on humic acids representative of eight increasing depth levels from a core drilled in the Mahakam delta (East Kalimantan, Indonesia). Oxygen amounts decrease observed during early diagenesis was related chiefly to loss of hydroxyl (lignol?) groups. Comparison between upper and deeper levels shows the following variations: hydroxyl group abundances go from 19 to 6% of humic oxygen. Identified functional groups amounts represent 47 to 32% of weight of moisture- and ash-free humic acids. No evidence of decarboxylation of humic material was detected.     

Longitudinal velocity patterns and bed morphology interaction in a rill

Present‐day understanding of rill dynamics is hampered by a lack of detailed data on velocity distributions in rills. The latter are dif?cult to collect with traditional techniques due to the very low water depths and the relatively high ?ow velocities in rills. The objectives of this paper were to investigate the feasibility of miniaturized acoustic Doppler velocimeter (mADV) measurements in rill ?ow and to explore longitudinal variations in ?ow velocities and their relationship with rill bed morphology. Detailed data on longitudinal ?ow velocity were required to achieve these objectives. A 1·8 m long rill was formed freely in a ?ume at 5° slope and 0·001 m³ s^?1 discharge. Rill topography was characterized by an alternation of steps and pools. The ?ume surface was then ?xed to preserve rill roughness. A topographical scanning of the entire ?ume surface was made. Velocity was measured with a mADV along the rill, and at different depths. Flow depth in a longitudinal direction was also measured using an elevation gauge. A strong relationship exists between rill topography and ?ow hydraulics. Over steps, ?ow was unidirectional and rapidly accelerating until a threshold Froude number (Fn) value between 1·3 and 1·7 was reached and a hydraulic jump occurred leading to the formation of a pool. In the pool, the ?ow pattern was multidirectional and complex. The ?ow was subcritical when leaving the pool and accelerated over the next step until the threshold Froude number value was again reached. Energy loss in the rill was concentrated in the pools, mainly due to the action of a hydraulic jump. This mechanism of energy dissipation appeared to be an essential factor in rill formation and bedform evolution. Copyright © 2004 John Wiley & Sons, Ltd.     

Correction factors for estimating suspended sediment export from loess catchments

This study focuses on problems related to estimating the exact exported suspended sediment quantity and quality from flow‐proportional samples taken at a fixed height at the outlet of a small, agricultural catchment in central Belgium. First, a correction factor is introduced to estimate the real suspended sediment concentration. This factor depends on the stream depth and the grain size distribution of the sediment and is necessary because of the presence of a concentration gradient in the stream. Secondly, water depth is corrected for the sediment volume, and thirdly, the grain size distribution of the exported sediment is corrected. The application of these correction factors leads to a reduction of the estimated total sediment export by 18 per cent (from 4810 Mg over a period of three years to 3930 Mg). Furthermore, the importance of small grain size fractions increases, leading to higher enrichment ratios for the clay fraction and lower ratios for the sand fraction. Suspended sediment export is thus more selective than was previously thought. Due to the overestimation of the sediment export, total phosphorus losses from the catchment are also overestimated by 17 per cent. This paper therefore emphasizes that point sampling of suspended sediment is biased and that a method should be incorporated to correct the sediment export in terms of quantity and quality. Copyright © 2001 John Wiley & Sons, Ltd.     

The recent star formation history of the Hipparcos solar neighbourhood

We use data from the Hipparcos catalogue to construct colour–magnitude diagrams for the solar neighbourhood, which are then treated using advanced Bayesian analysis techniques to derive the star formation rate history, SFR ( t ), of this region over the last 3 Gyr. The method we use allows the recovery of the underlying SFR ( t ) without the need of assuming any a priori structure or condition on SFR ( t ), and hence yields a highly objective result. The remarkable accuracy of the data permits the reconstruction of the local SFR ( t ) with an unprecedented time resolution of ≈50 Myr. An SFR ( t ) that has an oscillatory component of period ≈0.5 Gyr is found, superimposed on a small level of constant star formation activity. Problems arising from the non-uniform selection function of the Hipparcos satellite are discussed and treated. Detailed statistical tests are then performed on the results, which confirm the inferred SFR ( t ) to be compatible with the observed distribution of stars.     

Effects of seed particle size and composition on heterogeneous nucleation of n-nonane

Heterogeneous nucleation of supersaturated n-nonane vapour on seed particles of different size and composition has been investigated using a fast expansion chamber. Monodisperse seed particle sizes were ranging from about 4 nm up to about 24 nm in diameter. By using different types of particle generators WO_x, Ag and (NH₄)₂SO₄ particles were generated. For direct comparison between different particle compositions overlapping sizes have been generated for WO_x and Ag at about 7 nm particle diameter as well as for Ag and (NH₄)₂SO₄ at about 15 nm. Nucleation temperature was kept constant at about 278 K. Experimental data were compared to Kelvin equation and Fletcher theory including the effect of line tension. It was found that heterogeneous nucleation of n-nonane seems to be independent of seed particle composition and starts well below the Kelvin curve. Good agreement was achieved with Fletcher theory including the effect of line tension.     

The compatibility of erosion data at different temporal scales

Soil erosion processes have been studied intensively throughout the last decades and rates have been measured at the plot scale as well as at larger scales. However, the relevance of this knowledge for the modelling of long-term landscape evolution remains a topic of considerable debate. Some authors state that measurements of current rates are irrelevant to landscape evolution over a longer time span, as they are inconsistent with some fundamental characteristics of landscapes, such as the fact that the long-term sediment delivery ratio needs to be equal to 1 and that extrapolation of current rates would imply that all soils in Europe should have disappeared by now (e.g. Parsons, A.J., Wainwright, J., Brazier, R.E., Powell, D.M., 2006. Is sediment delivery a fallacy? Earth Surface Processes and Landforms 31, 1325–1328). In this study, we investigate if and to what extent estimates of long-term erosion rates are consistent with information obtained over much shorter time spans for the Loam Belt of Belgium.In a first step, observed short-term and long-term patterns in the Belgian loess area are compared statistically by classifying the study area into landscape element classes and comparing average erosion values per class. This analysis shows that the erosion intensities on the two temporal scales are of the same order of magnitude for each landscape element class. Next, the spatially distributed model WaTEM LT (Water and Tillage Erosion Model Long Term) is calibrated based on the available short-term data by optimising average erosion values for the same landscape element classes. Finally, the calibrated model is used to simulate long-term landform evolution, and is validated using long-term data based on soil profile truncation. We found that the model allows simulating landscape evolution on a millennial time scale using information derived from short-term erosion and deposition data. However, it is important that land use is taken into account for the calibration in order to obtain realistic patterns on a longer time scale. Our analysis shows that, at least for the study area considered, data obtained on erosion and deposition rates over various temporal scales have the same orders of magnitude, thereby demonstrating that measurements of current rates of processes can be highly relevant for interpreting long-term landscape evolution.