利用ASTER卫星立体像对提取喀斯特数字地形模型——以广西大化高峰丛深洼地喀斯特地貌为例

ASTER卫星立体像对已经被成功地用于提取全球数字地形模型（DEM）,其有效性已经在不同类型的非喀斯特地貌区域得到验证。和一般地貌相比,喀斯特地形,特别是中国南方喀斯特,具有自己独特的形态特征。能否从ASTER影像中精确地提取喀斯特地貌DEM目前尚未见到有任何报道。本文利用ASTER影像成功地提取了广西大化地区高峰丛深洼地的喀斯特地貌DEM,并且将提取结果与同一地区1∶5万地形图控制点的高程和4个剖面的高程变化进行了对比。研究区内绝大部分区域是喀斯特地貌,但在其西北部有一舌状砂岩地貌分布,从而提供了一个很好的喀斯特和非喀斯特地貌DEM精度对比的机会。本文的研究结果表明,从ASTER影像提取出来的砂岩地貌的DEM均方根误差要小于喀斯特地区,表明从ASTER影像中能更有效地提取非喀斯特地貌的DEM。相比之下,提取得到的喀斯特DEM精确度则稍差。究其原因主要是因为研究区内独特的高峰丛深洼地地形形态。由于峰丛地形的阴影在构成立体像对的两幅影像（nadir-looking和aft-loo-king）上的大小和形态差异很大,导致了DEM生产过程中两幅影像不能精确配准,从而产生比较大的误差。相比之下,砂岩地区地貌相对比较平坦,地形阴影大小和形态在两幅影像上差别不大,故而能得到精度比较高的数字地形模型。本文研究结果同时还表明适当增加地面控制点能在一定程度上改善提取出来的喀斯特地貌DEM的精度。尽管提取的数字地形模型精度稍低,其均方根误差仍然远远小于该地区峰丛和洼地个体体量。因此本研究认为从ASTER立体像对提取的数字地形模型可广泛用于喀斯特地貌形态特征研究。     

An investigation of tsunami source mechanism off the coast of central Peru

The source mechanism of the tsunami generated by the earthquake of 17 October, 1966 off the coast of central Peru was inferred by studying the seismic and oceanic phenomena associated with this event. The seismic mechanism was deduced from geologic structure, seismic intensities, energy releases, spatial distribution of aftershocks, and fault-plane solutions. Using this information and empirical relationships of seismic parameters, the fault length, azimuthal orientation of the tsunamigenic area, and initial tsunami height, were obtained. From the tsunami arrival times at selected stations and from a reverse wave-refraction technique, the limits of the tsunami-generating area were estimated. Using these source dimensions, an estimate of the tsunami energy was obtained. The spatial distribution of aftershocks associated with the main earthquake and the earthquake strain-release pattern correlated well with known seismotectonic trends and the seismic-velocity structure anomalies which are characteristic of thrust fault systems at continent-ocean boundaries. The investigation revealed that the tsunamigenic area was on the continental shelf off Peru, northwest of Lima, in the western part of an active seismic belt between the Andean Mountain block and the Peru-Chile trench. This area is considered to be one of three distinct seismic zones in the Peruvian upper mantle and has been responsible for a number of tsunamigenic earthquakes within recorded history. The aftershock distribution and strain-release patterns suggest that the earthquake fault was a seaward extension of a fault system which has a pronounced surface expression in the Tertiary formations of the area near Ancon, Peru. The limits of the tectonic displacements and the tsunami-generating area were determined by a reverse wave-refraction method, refracting waves from Chimbote, Callao-Lima, San Juan, and Honolulu. The investigation revealed that the tsunami was generated by displacements of crustal blocks with a total area of 13,000 sq. km. Seismic and water motion data indicated that the uplifted portion of the crustal block was on the continental side of the rift. The energy of the main earthquake was estimated to be 1.122·10²³ ergs. The energy of the aftershocks was estimated to be 2.357·10²⁰ ergs. The tsunami energy was calculated to be 6.8·10¹⁹ ergs, or $\text{1}\text{1,650}$ of the earthquake energy.     

Induction of cytochrome p-450 monooxygenase activities in plaice by ‘model’ inducers and drilling muds

The hepatic cytochrome P-450-dependent monooxygenase system of the marine fish plaice has been characterised by i.p. injection with chemical inducing agents, followed by measurement of a variety of monooxygenase activities. The results suggest that more than one isozyme is present in these fish. The response to oil-based drilling fluids, a major contaminant of the North Sea, has also been examined and indicates that more than one isozyme is responsive to these products.     

The Harvest Experiment: Monitoring Jason-1 and TOPEX/POSEIDON from a California Offshore Platform

We present calibration results from Jason-1 (2001-) and TOPEX/POSEIDON (1992-) overflights of a California offshore oil platform (Harvest). Data from Harvest indicate that current Jason-1 sea-surface height (SSH) measurements are high by 138 ± 18 mm. Excepting the bias, the high accuracy of the Jason-1 measurements is in evidence from the overflights. In orbit for over 10 years, the T/P measurement system is well calibrated, and the SSH bias is statistically indistinguishable from zero. Also reviewed are over 10 years of geodetic results from the Harvest experiment.     

Levels of cellular glutathione and metallothionein affect the toxicity of oxidative stressors in an established carp cell line.

The comparative toxicity of a variety of oxidative stressors was studied in the epithelioma papulosum cyprini line from carp using the neutral red cytotoxicity assay. LC50's decreased in the order t-butylhydroperoxide > hydrogen peroxide > diquat > paraquat. The cytotoxicity of hydrogen peroxide was significantly reduced when the cells were grown in L-15 medium rather than MEM and this could be attributed to elevated cellular glutathione and metallothionein levels and higher activities of GSH-dependent detoxification systems. The protective effect of metallothionein in radical scavenging was demonstrated by decreased toxicity of the redox-cycling toxicants, diquat and menadione after metallothionein levels had been pre-induced by Cd-exposure. This study demonstrates the relationship between toxic effects of oxidative stressors and expression of detoxification systems in fish.     

Development of a fish in vitro cell culture model to investigate oxidative stress and its modulation by dietary vitamin E.

When cultured in Dulbecco's minimal essential medium the established epithelioma papulosum cyprini cell line from carp was found to be vitamin E-deficient due to the very low level of vitamin E in the medium and the foetal calf serum used as supplement. The toxicity of oxidative stressors to this cell line was evaluated by means of the neutral red cytotoxicity assay and it was found that an organic hydroperoxide, t-butylhydroperoxide was extremely cytotoxic and that the redox-cycling agents diquat and menadione were less toxic. When grown under vitamin E supplementation (25 microM), the toxicity of these chemicals was reduced by at least an order of magnitude in concentration demonstrating the protective effect of vitamin E. These data show the importance of vitamin E status for interpretation of in vitro and in vivo data and that this in vitro system is useful for mechanistic studies.     

Cadmium, copper, and zinc interactions with marine humus as a function of ligand structure

The interactions in seawater of cadmium, copper, and zinc with natural levels of marine humus (fulvic and humic acids) were studied using differential pulse anodic stripping voltammetry (DPASV). Interactions with Cu were also examined by ultraviolet spectrophotometry. The degree of interaction relates to the structure of the particular fulvic or humic acid tested. Marine fulvic and humic acids with different equivalent weights and varying degrees of aromaticity and heteroatom substitution were tested to assess the relative importance of these fundamental structural features in determining the degree of interaction. An index of heteroatom substitution, derived from proton magnetic resonance spectra of these materials, when combined with equivalent weights correlated with the nature and degree of metal interaction. Both marine fulvic and humic acids appreciably interacted with Zn. In contrast, the extent of interaction of fulvic acids with Cu appears to be related to their structure while humic acids appear to interact with Cu regardless of structure. Cadmium interacts only with mature, highly crosslinked humic acids.     

Optimum design of Ocean bottom seismometers

Ocean bottom seismometers (OBS) have been widely used during the past decade to collect seismic data for determination of the structure of the oceanic lithosphere, stress patterns in regions of earthquake activity, and geoacoustic parameters of the ocean floor. Data quality from these experiments has often been disappointing because of poor signal quality and high noise levels. Many of these problems result from motion of the OBS package that is decoupled from motion of the ocean floor. These coupling problems are more serious in the ocean than on land because of the low shear strengths of most ocean sediments. In this paper we continue to develop the theory of coupling of OBSs to soft sediments and arrive at results suggesting that OBS packages should be designed with: (1) the minimum mass possible, (2) radius of area in contact with the sediment proportional to the cube root of the mass, and the maximum radius less than 1/4 of the shear wavelength, (3) density of the OBS approximately that of the sediment, (4) a low profile and a small vertical cross section with water, and (5) low density gradients, and maximum symmetry about the vertical axis. Agreement of the theory with test data is good; most deviations are reasonable, given limitations of the theory and experiments. The theory also suggests that the coupling frequency, the frequency above which the OBS does not follow the motion of the sediment, is directly proportional to the sediment shear velocity.