Footings under seismic loading: Analysis and design issues with emphasis on bridge foundations

The paper provides state-of-the-art information on the following aspects of seismic analysis and design of spread footings supporting bridge piers: (1) obtaining the dynamic stiffness (“springs” and “dashpots”) of the foundation; (2) computing the kinematic response; (3) determining the conditions under which foundation–soil compliance must be incorporated in dynamic structural analysis; (4) assessing the importance of properly modeling the effect of embedment; (5) elucidating the conditions under which the effect of radiation damping is significant; (6) comparing the relative importance between kinematic and inertial response. The paper compiles an extensive set of graphs and tables for stiffness and damping in all modes of vibration (swaying, rocking, torsion), for a variety of soil conditions and foundation geometries. Simplified expressions for computing kinematic response (both in translation and rotation) are provided. Special issues such as presence of rock at shallow depths, the contribution of foundation sidewalls, soil inhomogeneity and inelasticity, are also discussed. The paper concludes with parametric studies on the seismic response of bridge bents on embedded footings in layered soil. Results are presented (in frequency and time domains) for accelerations and displacements of bridge and footing, while potential errors from some frequently employed simplifications are illustrated.     

Biogenic origin of coastal honeycomb weathering

Honeycomb weathering occurs in two environments in Late Cretaceous and Eocene sandstone outcrops along the coastlines of south‐west Oregon and north‐west Washington, USA, and south‐west British Columbia, Canada. At these sites honeycomb weathering is found on subhorizontal rock surfaces in the intertidal zone, and on steep faces in the salt spray zone above the mean high tide level. In both environments, cavity development is initiated by salt weathering. In the intertidal zone, cavity shapes and sizes are primarily controlled by wetting/drying cycles, and the rate of development greatly diminishes when cavities reach a critical size where the amount of seawater left by receding tides is so great that evaporation no longer produces saturated solutions. Encrustations of algae or barnacles may also inhibit cavity enlargement. In the supratidal spray zone, honeycomb weathering results from a dynamic balance between the corrosive action of salt and the protective effects of endolithic microbes. Subtle environmental shifts may cause honeycomb cavity patterns to continue to develop, to become stable, or to coalesce to produce a barren surface. Cavity patterns produced by complex interactions between inorganic processes and biologic activity provide a geological model of ‘self‐organization’. Surface hardening is not a factor in honeycomb formation at these study sites. Salt weathering in coastal environments is an intermittently active process that requires particular wind and tidal conditions to provide a supply of salt water, and temperature and humidity conditions that cause evaporation. Under these conditions, salt residues may be detectable in honeycomb‐weathered rock, but absent at other times. Honeycomb weathering can form in only a few decades, but erosion rates are retarded in areas of the rock that contain cavity patterns relative to adjacent non‐honeycombed surfaces. Copyright © 2010 John Wiley & Sons, Ltd.     

Viticulture in California: Cool airconditioned valleys as the equivalent of warm sheltered “côtes”

This essay focuses on the distinctive geographic setting of viticulture in California. It assesses the significance of the prevailing environmental conditions for wine growing in California and offers an explanation of the spatial pattern of Californian wine climate regions. Wine varieties in California, as almost everywhere in the world, are of European origin (Vitis vinifera). The ultimate result of a bio-geographic diffusion process of Vitis vinifera was the development of superior wine varieties in a climate that is marginal for wine growing in Western Europe (Cf-Köppen). Nestled in a cooler and more precarious macro-climatological environment, the relatively warm micro climates of the slopes (cotes) allow wine growing. The noble varieties peculiar to the slopes have been successfully transplanted in California's coastal valleys, this not-withstanding the California environment, which is diametrically opposed to that in Western Europe. In a hot macro environment (Cs-Köppen), high-quality wine growing is only possible due to the cool airconditioned micro climate in the valleys.     

Wrench faults,pull-apart basins,and volcanism in central Oregon: A new tectonic model based on image interpretation

A tectonic study of the Newberry Crater region of central Oregon has been based on the interpretation of Landsat Thematic Mapper imagery. Two major faults, the Brothers-Tumalo and Eugene-Denio Faults, pass NW-SE through the region and step to the right at the eastern margin of the Cascades Range. Dextral wrench faulting on these structures during the Tertiary controlled the formation of the La Pine Basin, a pull-apart structure containing Tertiary and Quaternary sediments and volcanics. Tertiary wrench faulting appears to have been associated with rotations of crustal blocks at a plate margin, but was superseded in the Quaternary by extensional faulting of the Basin and Range province. Newberry Crater and other major bimodal volcanic centres in the NW Cordillera (Crater Lake, Medicine Lake, Mt. St. Helens) seem to have a similar tectonic setting in crustal pull-aparts. A relationship between magma type and fault trend at Newberry and Medicine Lake is suggested.     

Toroidal versus poloidal magnetic fields in Sun-like stars: a rotation threshold

From a set of stellar spectropolarimetric observations, we report the detection of surface magnetic fields in a sample of four solar-type stars, namely HD 73350, HD 76151, HD 146233 (18 Sco) and HD 190771. Assuming that the observed variability of polarimetric signal is controlled by stellar rotation, we establish the rotation periods of our targets, with values ranging from 8.8 d (for HD 190771) to 22.7 d (for HD 146233). Apart from rotation, fundamental parameters of the selected objects are very close to the Sun's, making this sample a practical basis to investigate the specific impact of rotation on magnetic properties of Sun-like stars.
We reconstruct the large-scale magnetic geometry of the targets as a low-order  (ℓ < 10)  spherical harmonic expansion of the surface magnetic field. From the set of magnetic maps, we draw two main conclusions. (i) The magnetic energy of the large-scale field increases with rotation rate. The increase in chromospheric emission with the mean magnetic field is flatter than observed in the Sun. Since the chromospheric flux is also sensitive to magnetic elements smaller than those contributing to the polarimetric signal, this observation suggests that a larger fraction of the surface magnetic energy is stored in large scales as rotation increases. (ii) Whereas the magnetic field is mostly poloidal for low rotation rates, more rapid rotators host a large-scale toroidal component in their surface field. From our observations, we infer that a rotation period lower than ≈12 d is necessary for the toroidal magnetic energy to dominate over the poloidal component.     

Sur quelques concentrations plombo-zinciferes du devonien inferieur du massif schisteux rhenan

Zusammenfassung The Lower Devonian of the Rhine Schist Massif is characterized by a fine detrital sedimentation which reflects a coastal plain environment located between the Old Red Sandstone continent in the N and the marine Bohemian Facies in the SE. Mineralisations are located within these coastal-plain sediments, especially in fractured horizons topped by pelitic and floored by sandy sediments of Sieg Emsian age. The mineralised localities occur in three zones: the districts of Bensberg, Eitorf and Mayen. The Lüderich locality (Bensberg) is the most important having approximately one million tons of Zn and Pb metal. It is localised within a zone having marked sedimentary characteristics since the Siegenian. Mineralisation occurs as penecontemporaneous lenses, fracture fillings etc, formed at abnormal contacts between lithological units having different competance during Siegenian and Lower Emsian deformation. However, locally there is lateral transition between the upper units of the sandy channel series and the lower units of the pelitic swamp facies. Vertical extension of mineralisations is strictly limited to the tectonic contact zone between the Odenspiel Sandstone and the Bensberg pelites. Study of mineralisations at various levels (mapping, morphology, structure, paragenetic and geochemical) leads to the formulation of a genetic model requiring complex fracturation at the contact between contrasting lithologies and preferential drainage through these fractured zones; metals are trapped on the sandstone floor, the pelitic roof trapping the vadose hydrothermal solutions. These basic controls seem to apply throughout the Bensberg, Eitorf and Mayen districts. On a more regional scale the age variations of the gangue sediments reflects a lateral displacement of red/grey facies limits due to coastal evolution. Thus one may demonstrate a type of mineral occurrence whose model may be that of epigenetic reconcentration within fractures affecting syngenetic geochemical anomalies.Zusammenfassung Das Unterdevon des Rheinischen Schiefergebirges wird durch eine feinkörnige detritische Sedimentation gekennzeichnet. Die Verteilung dieser detritischen Sedimente widerspiegelt eine flache Küstenlandschaft zwischen dem Kontinent des Unterrotliegenden im Norden und des Meeres mit der Böhmischen Fazies im Südosten. In diesen Schichten befinden sich gangförmige Vererzungen, die in Bruchzonen auftreten, die ein pelitisches Hangendes und ein sandsteinreiches Liegendes vom Siegen-Ems Alter haben. Die Lagerstätten kommen in drei Bezirken vor: Der Bensberger Bezirk, der Bezirk Eitorf und der Bezirk Mayen. Die Lagerstätte Lüderich (Bensberger Revier) ist die größte (ungefähr eine Million Tonnen Metall Zink+Blei). Sie befindet sich in einer Zone, in der schon in der Siegen-Stufe bemerkenswerte sedimentäre Strukturen auftreten. Die Vererzung tritt als penekonkordante Linsen, Gänge, Stockwerke in tektonischen Kontaktzonen auf. Diese Kontaktzonen befinden sich zwischen 2 verschiedenen sedimentären Einheiten, deren Gesteinseigenschaften sehr verschieden sind. Es handelt sich um Pelite mit Sandstein-Einschaltungen einerseits, die zur unteren Emsstufe gehören sollen und um fluviatile Sandsteine andererseits, die zur oberen Siegenstufe gehören sollen. Lokal ist ein lateraler Übergang durch Faziesänderung von den oberen Sandsteinen in die unteren Pelitschichten jedoch nicht unmöglich. Die Sandsteine vertreten einen fluviatilen Sedimentationsbereich, die Pelite einen sumpfigen Sedimentationsbereich. Die Vererzung (mit einer vertikalen Ausdehnung ungefähr von 300 m) tritt nur im Bereich der Kontaktzone zwischen den Odenspieler Sandsteinen und den Peliten der Unteren Bensberger Schichten auf. Die Resultate der Kartographie, der morphologischen Studie der Erzkörper, der Struktur und der Paragenese führen zu einem genetischen Modell. Dabei spielt die Anwesenheit einer Bruchstruktur an der Grenze zwischen 2 Bereichen mit verschiedenen lithologischen Eigenschaften eine Hauptrolle für die Konzentration der im Hangenden fein verteilten Metalle. Die hydrothermalen Lösungen kommen demnach nicht von der Teufe, sondern aus dem Nebengestein. Im ganzen Bensberger Erzrevier wie in der Gegend von Eitorf und in der Gegend von Mayen finden wir dieselben Leitfäden für die Vererzung in den Lagerstätten und Vorkommen. Beobachtet man die ganze Provinz, dann merkt man, daß die Altersverschiedenheiten in den Nebengesteinen der verschiedenen Lagerstätten eine geographische Wanderung der Faziesgrenze zwischen rot und grau in dieser küstennahen Ebene Widerspiegeln. Die verschiedenen Vorkommen und Lagerstätten treten immer in unmittelbarer Nähe dieser Grenze auf. Die Eigenschaften dieser Lagerstätten weisen auf eine Bildung durch eine epigenetische Umlagerung in eine gangförmige Bruchstruktur hin.     

Proper motion surveys in the infrared

Current and future wide field surveys in infrared passbands present opportunities for ultra low‐mass stellar sample selection via proper motions, as well as or instead of purely photometric techniques. Furthermore, proper motion measurements yield additional clues as to candidate membership of cluster or field (kinematic) populations. In this paper we review some recent results and speculate as to the possibilities afforded by the next generation of wide‐field infrared surveys. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)