Radiative Shock Experiments At Luli

We present the set-up and the results of a supercritical radiative shock experiment performed with the LULI nanosecond laser facility. Using specific designed targets filled with xenon gaz at low pressure, the propagation of a strong shock with a radiative precursor is evidenced. The main measured quantities related to the shock (electronic density, propagation velocities, temperature, radial dimension) are presented and compared with various numerical simulations.     

Chemical and mineralogical compositions of two grains recovered from asteroid Itokawa

Two silicate grains (RB‐QD04‐0049 and RA‐QD02‐0064, whose estimated masses are 0.050 μg and 0.048 μg, respectively) recovered from the asteroid Itokawa by the Hayabusa spacecraft were studied for their mineralogical characteristics by synchrotron X‐ray diffraction and synchrotron X‐ray microtomography and further analyzed for their bulk chemical compositions by instrumental neutron activation analysis (INAA). According to X‐ray tomography, RB‐QD004‐0049 is composed of olivine, high‐Ca pyroxene, plagioclase, Ca‐phosphate, and troilite, whereas RA‐QD002‐0064 entirely consists of olivine. INAA data are consistent with these mineral compositions except for rare earth elements (REEs). Although the grain RB‐QD004‐0049 contains measurable REEs, which seems to be consistent with the presence of Ca‐phosphate, their abundances are anomalously high. Very low abundance of Co implies less than 0.1 mass% of metals in these two grains by calculation, which is in contrast to the result for the previously analyzed grain RA‐QD02‐0049 (Ebihara et al., 2011). FeO/Sc ratios of the grains fall within the range of those for ordinary chondrite olivines, implying that these grains are extraterrestrial in origin. FeO/MnO ratios also confirm this conclusion and further suggest that the Hayabusa grains analyzed in this study are similar to material found in LL chondrites rather than CK chondrites although olivines from LL and CK chondrites have similar Fa# (molar% of Fe relative to [Fe+Mg] in olivine) (~30) to those of the Hayabusa grains including the two grains analyzed in this study.     

Rare-earth elements in matrix,inclusions, and chondrules of the Allende meteorite

Rare-earth elements in a whole-rock sample and in major components of the Allende meteorite were investigated; for a few samples, abundances of Ba, Sr, Ca, and Al were also determined. Of the materials investigated in the present work, CaAl-rich inclusions G and O seem to be of the greatest significance. In spite of the minor difference in mineralogy between them, the apparent chondrite-normalized RE pattern is much different between these two inclusions. (Yb and Eu in inclusion G appear exceptionally irregular). This observation is inferred to reflect a rather subtle difference in condition of condensation. It is also worthwhile to note that, while two portions (pink and white) of the inclusion G show similar aspects in the abundances of lithophile trace elements investigated, they show a remarkable difference at the same time. The white portion (G_w) of inclusion G can be considered to be a mixture of chondritic material and highly fractionated material like the faintly pink portion (G_p) picked from the same inclusion. This would suggest the possibility that the G_p-like material was produced from chondritic dust.The “matrix” separated from Allende was found to be fractionated with respect to the RE abundances relative to representative chondrite. It has also a very high value for the Ba abundance.     

Laboratory experiments and thermal calculations for the development of a next-generation glacier-ice exploration system: Development of an electro-thermal drilling device

A next-generation drilling system, equipped with a thermal drilling device, is proposed for glacier ice. The system is designed to penetrate glacier ice via melting of the ice and continuously analyze melt-water in a contamination-free sonde. This new type of drilling system is expected to provide analysis data in less time and at less cost than existing systems. Because of the limited number of parameters that can be measured, the proposed system will not take the place of conventional drilling systems that are used to obtain ice cores; however, it will provide a useful method for quickly and simply investigating glacier ice.An electro-thermal drilling device is one of the most important elements needed to develop the proposed system. To estimate the thermal supply required to reach a target depth in a reasonable time, laboratory experiments were conducted using ice blocks and a small sonde equipped solely with heaters. Thermal calculations were then performed under a limited range of conditions. The experiments were undertaken to investigate the effects of the shape and material of the drill head and heater temperature on the rate of penetration into the ice. Additional thermal calculations were then performed based on the experimental results.According to the simple thermal calculations, if the thermal loss that occurs while heat is transferred from the heater to ice (in melting the ice) is assumed to be 50%, the total thermal supply required for heaters in the sonde and cable is as follows: (i) 4.8 kW (sonde) plus 0 W (cable) to penetrate to 300 m depth over 10 days into temperate glacier ice for which the temperature is 0 °C at all depths and to maintain a water layer along 300 m of cable; (ii) 10 kW (sonde) plus 19–32 kW (cable) to penetrate to 1000 m depth over 1 month into cold glacier ice for which the temperature is −25 °C at the surface and 0 °C at 1000 m depth and to maintain a water layer along 1000 m of cable; and (iii) 19 kW (sonde) plus 140–235 kW (cable) to penetrate to 3000 m depth over 2 months into an ice sheet for which the temperature is −55 °C at the surface and 0 °C at 3000 m depth and to maintain a water layer along 3000 m of cable. The thermal supply required for the cable is strongly affected by the thickness of the water layer, cable diameter, and the horizontal distance from the ice wall at which the ice temperature was maintained at its initial temperature. A large thermal supply is required to heat 3000 m of cable in an ice sheet (scenario (iii) above), but penetration into glacier ice (scenarios (i) and (ii) above) could be realistic with the use of a currently employed generator.     

Crystallization temperature determination of Itokawa particles by plagioclase thermometry with X‐ray diffraction data obtained by a high‐resolution synchrotron Gandolfi camera

The crystallization temperatures of Itokawa surface particles recovered by the space probe Hayabusa were estimated by a plagioclase geothermometer using sodic plagioclase triclinicity. The Δ131‐index required for the thermometer, which is the difference in X‐ray diffraction peak positions between the 131 and 11 reflections of plagioclase, was obtained by a high‐resolution synchrotron Gandolfi camera developed for the third generation synchrotron radiation beamline, BL15XU at SPring‐8. Crystallization temperatures were successfully determined from the Δ131‐indices for four particles. The observed plagioclase crystallization temperatures were in a range from 655 to 660 °C. The temperatures indicate crystallization temperatures of plagioclases in the process of prograde metamorphism before the peak metamorphic stage.     

Long-term patterns in the diets of Japanese temperate bassLateolabrax japonicus larvae and juveniles in Chikugo estuarine nursery ground in Ariake Bay, Japan

Larval and juvenile Japanese temperate bass (Lateolabrax japonicus) samples were collected from a wide range of spatial gradients (covering a distance of approximately 30 km) in Chikugo estuary, Ariake Bay, Japan over a period of 8 yr (1997–2004) in order to observe changes in diet. Gut contents were studied by separating, identifying, counting, and estimating the dry weight of prey organisms. Copepod samples were collected during each cruise to observe the numerical composition, abundance, and biomass in the estuary. Considerable spatial and temporal variations were observed in copepod distributions in ambient water and the diets of the fish. Two distinctly different copepod assemblages were identified in the estuary: One in the upper estuarine turbidity maximum (ETM), dominated by a single speciesSinocalanus sinensis and the other in the lower estuary consisting of a multispecies assemblage, dominated byOithona davisae, Acartia omorii, Paracalanus parvus, andCalanus sinicus. The gut content composition of the fish in the upper estuary was dominated byS. sinensis, while in the lower estuary, it consisted ofP. parvus, O. davisae, andA. omorii. Within the size group analyzed (13.0–27.0 mm SL), the smaller individuals were found to feed on a mixed diet composed of smaller prey. The diets gradually shifted to bigger prey composed predominantly ofS. sinensis for larger size groups. Greater proportions of empty guts were recorded in the smaller individuals and dropped with increasing fish size. Higher dry biomass of copepods in the environment, as well as higher dry weights of gut contents, were recorded in the upper estuary, indicating that the upper estuarine ETM areas are important nursery grounds for the early life stages of the Japanese temperate bass. The early life stages of the Japanese temperate bass are adapted to use the upstream nursery grounds and ascending to the nursery areas to useS. sinensis is one of the key survival strategies of the Japanese temperate bass in the Chikugo estuary.