The Port Mouton Shear Zone: intersection of a regional fault with a crystallizing granitoid pluton

The peraluminous tonalite–monzogranite Port Mouton Pluton is a petrological, geochemical, structural, and geochronological anomaly among the many Late Devonian granitoid intrusions of the Meguma Lithotectonic Zone of southern Nova Scotia. The most remarkable structural feature of this pluton is a 4-km-wide zone of strongly foliated (040/subvertical) monzogranites culminating in a narrow (10–30 m), straight, zone of compositionally banded rocks that extends for at least 3 km along strike. The banded monzogranites consist of alternating melanocratic and leucocratic compositions that are complementary to the overall composition of that part of the pluton, suggesting an origin by mineral–melt and mineral–mineral sorting. Biotite and feldspar are strongly foliated in the plane of the compositional bands. These compositional variations and foliations originated by a process of segregation flow during shearing of the main magma with a crystallinity of 55–75%. Subsequent minor brittle fracturing of feldspars, twinning of microcline, development of blocky sub-grains in quartz, and kinking of micas demonstrate overprinting by a high-temperature deformation straddling the monzogranite solidus. Small folds and late sigmoidal dykes indicate dextral movement on the shear zone. This Port Mouton Shear Zone (PMSZ) is approximately co-linear with the only outcrops of Late Devonian mafic intrusions in the area, two of which are syn-plutonic with well-developed mingling textures in the marginal tonalite of the Port Mouton Pluton. Also closely co-linear with the mafic intrusions are a granitoid dyke that extends well beyond the outer contact of the Port Mouton Pluton, a swarm of large aligned angular xenolithic slabs, a zone of thin wispy schlieren banding, a large Be-bearing pegmatite, and a breccia pipe with abundant garnetiferous metapelitic xenoliths. In various ways, the shear zone may control all of these features. The Port Mouton Shear Zone is parallel to many other NE-trending faults and shear zones in the northern Appalachians, probably related to the docking of the Meguma Zone along the Cobequid–Chedabucto Fault system.     

A Model for the polar motion of the deformable Earth adequate for astrometric data

Refined analytical expressions for the frequencies corresponding to the Chandler motion of the pole and the diurnal rotation of the deformable Earth are derived. Numerical estimates of the period and amplitude of the polar oscillations are presented. The trajectory of the Chandler polar motion derived via numerical modeling is in qualitative and quantitative agreement with experimental data from the International Earth Rotation Service (IERS). An evolutionary model describing slow variations in the Earth’s rotation parameters under the action of the dissipative moments of the tidal gravitational forces on time scales considerably longer than the precession period of the Earth’s axis is constructed. The axis of the Earth’s figure tends to approach the angular momentum vector of the proper rotation.     

Origin of spongy textures in clinopyroxene and spinel from mantle xenoliths, Hessian Depression, Germany

Summary Spongy textures are observed in anhydrous Group 1 mantle xenoliths (harzburgite, lherzolite and wehrlite) hosted in Tertiary alkali basaltic lavas from the Hessian Depression, Germany. These textures are developed only on clinopyroxene and spinel, and occur as rims or cross-cutting veinlets and patches showing optical continuity with the host grain. They are often associated with pools of amorphous glassy material. There is no preferential development of spongy domains against the xenolith-lava contact suggesting that the host magma did not play any significant role in their formation. Spongy clinopyroxene and spinel occur in all rock types, but, are more pervasive in wehrlite. Chemically, spongy domains of clinopyroxene and spinel are more refractory than unaffected areas, which is consistent with their formation through a partial melting event. The associated glassy material shows chemical characteristics which suggest that the melt pools are genetically related to the development of the spongy textures. The partial melting event was probably triggered by the infiltration of a low-density fluid. The fluid may have evolved from a silicate melt responsible for the metasomatic Fe-enrichment recorded in wehrlite. In this context, the more pervasive development of spongy clinopyroxene in wehrlite may be explained by a higher concentration of the evolved fluid phase at proximity to its silicate melt source. Received March 15, 2000; revised version accepted September 6, 2001     

Dissolution channels in quartz and the role of pressure changes in gold and sulfide deposition in the Archean, greenstone-hosted, Hutti gold deposit, Karnataka, India

The pressure, temperature and composition of ore fluids that resulted in gold deposition in the Archean, greenstone-hosted Hutti deposit have been studied using fluid inclusions and the compositions of arsenopyrite and chlorite. Five types of fluids have been identified in fluid inclusions in quartz veins associated with mineralization. They are (1) monophase CO ₂-rich fluid; (2) low-salinity (0 to 14 wt% NaCl equivalent) and high-salinity (16 to 23 wt% NaCl equiv.) aqueous fluids; (3) high-salinity (28 to 40 wt% NaCl equiv.), polyphase aqueous fluids; (4) CO ₂–H ₂O–NaCl fluids of low salinity (0–8 wt% NaCl equiv.); and (5) a few carbonic inclusions with halite±nahcolite. The diversity of entrapped fluid composition is explained in terms of changes in fluid pressure and temperature which affect a more or less uniform supply of primary low-salinity CO ₂–H ₂O–NaCl fluid to the shear zone. Geothermobarometric studies indicate that during mineralization temperature ranged between 360 and 240 °C, and fluid pressure between 3,600 and 1,600 bar. The data are interpreted in terms of the cyclic fault-valve mechanism for active shear zones. Deposition of gold and sulfides has been studied on the basis of constraints from the composition of wall-rock chlorite, ore-mineral assemblages, and textural features. Tubular channels, 20 to 100 µm wide and up to 500 µm long that arise from fractures and C-planes in sheared quartz veins are reported for the first time. The channels have pyrrhotite, arsenopyrite, pyrite and gold at their distal ends, with calcite filling up the remaining part. These channels form in response to increases in T and P, by dissolution of quartz grains, guided by dislocations in them. At the P– T conditions of interest, gold and sulfide deposition takes place in the shears and fractures of quartz veins from CO ₂–H ₂O–NaCl ore fluid of low salinity and pH due to changes in phase compositions that occur during the process of shear failure of the enclosing rocks. In the wall rock where pH is buffered, gold deposition takes place from the predominant Au(HS) ₂ ^- species with progressive sulfide deposition and decrease in SS, from 0.01 to 0.001 mol/kg as T falls from 360 to 240 °C.     

Rare gas isotopes and parent trace elements in ultrabasic-alkaline-carbonatite complexes, Kola Peninsula: identification of lower mantle plume component

During the Devonian magmatism (370 Ma ago) ∼20 ultrabasic-alkaline-carbonatite complexes (UACC) were formed in the Kola Peninsula (north-east of the Baltic Shield). In order to understand mantle and crust sources and processes having set these complexes, rare gases were studied in ∼300 rocks and mineral separates from 9 UACC, and concentrations of parent Li, K, U, and Th were measured in ∼70 samples. ⁴He/³He ratios in He released by fusion vary from pure radiogenic values ∼10⁸ down to 6 × 10⁴. The cosmogenic and extraterrestrial sources as well as the radiogenic production are unable to account for the extremely high abundances of ³He, up to 4 × 10⁻⁹ cc/g, indicating a mantle-derived fluid in the Kola rocks. In some samples helium extracted by crushing shows quite low ⁴He/³He = 3 × 10⁴, well below the mean ratio in mid ocean ridge basalts (MORB), (8.9 ± 1.0) × 10⁴, indicating the contribution of ³He-rich plume component. Magnetites are principal carriers of this component. Trapped ³He is extracted from these minerals at high temperatures 1100°C to 1600°C which may correspond to decrepitation or annealing primary fluid inclusions, whereas radiogenic ⁴He is manly released at a temperature range of 500°C to 1200°C, probably corresponding to activation of ⁴He sites degraded by U, Th decay.Similar ⁴He/³He ratios were observed in Oligocene flood basalts from the Ethiopian plume. According to a paleo-plate-tectonic reconstruction, 450 Ma ago the Baltica (including the Kola Peninsula) continent drifted not far from the present-day site of that plume. It appears that both magmatic provinces could relate to one and the same deep-seated mantle source.The neon isotopic compositions confirm the occurrence of a plume component since, within a conventional ²⁰Ne/²²Ne versus ²¹Ne/²²Ne diagram, the regression line for Kola samples is indistinguishable from those typical of plumes, such as Loihi (Hawaii). ²⁰Ne/²²Ne ratios (up to 12.1) correlate well with ⁴⁰Ar/³⁶Ar ones, allowing to infer a source ⁴⁰Ar/³⁶Ar ratio of about 4000 for the mantle end-member, which is 10 times lower than that of the MORB source end-member. In (³He/²²Ne)_PRIM versus (⁴He/²¹Ne)_RAD plot the Kola samples are within array established for plume and MORB samples; almost constant production ratio of (⁴He/²¹Ne)_RAD ≅ 2 × 10⁷ is translated via this array into (³He/²²Ne)_PRIM ∼ 10. The latter value approaches the solar ratio implying the non-fractionated solar-like rare gas pattern in a plume source.The Kola UACC show systematic variations in the respective contributions of in situ-produced radiogenic isotopes and mantle-derived isotopes. Since these complexes were essentially plutonic, we propose that the depth of emplacement exerted a primary control on the retention of both trapped and radiogenic species, which is consistent with geological observations. The available data allow to infer the following sequence of processes for the emplacement and evolution of Kola Devonian UACC: 1) Ascent of the plume from the lower mantle to the subcontinental lithosphere; the plume triggered mantle metasomatism not later than ∼700 to 400 Ma ago. 2) Metasomatism of the lithosphere (beneath the central part of the Kola Peninsula), including enrichment in volatile (e.g., He, Ne) and in incompatible (e.g., U, Th) elements. 3) Multistage intrusions of parental melts, their degassing, and crystallisation differentiation ∼370 Ma ago. 4) Postcrystallisation migration of fluids, including loss of radiogenic and of trapped helium. Based on model compositions of the principle terrestrial reservoirs we estimate the contributions (by mass) of the plume material, the upper mantle material, and the atmosphere (air-saturated groundwater), into the source of parent melt at ∼2%, 97.95%, and ∼0.05%, respectively.     

Kinetics of Mn(II) oxidation by Leptothrix discophora SS1

The kinetics of Mn(II) oxidation by the bacterium Leptothrix discophora SS1 was investigated in this research. Cells were grown in a minimal mineral salts medium in which chemical speciation was well defined. Mn(II) oxidation was observed in a bioreactor under controlled conditions with pH, O₂, and temperature regulation. Mn(II) oxidation experiments were performed at cell concentrations between 24 mg/L and 35 mg/L, over a pH range from 6 to 8.5, between temperatures of 10°C and 40°C, over a dissolved oxygen range of 0 to 8.05 mg/L, and with L. discophora SS1 cells that were grown in the presence of Cu concentrations ranging from zero to 0.1 μM. Mn(II) oxidation rates were determined when the cultures grew to stationary phase and were found to be directly proportional to O₂ and cell concentrations over the ranges investigated. The optimum pH for Mn(II) oxidation was approximately 7.5, and the optimum temperature was 30°C. A Cu level as low as 0.02 μM was found to inhibit the growth rate and yield of L. discophora SS1 observed in shake flasks, while Cu levels between 0.02 and 0.1 μM stimulated the Mn(II) oxidation rate observed in bioreactors. An overall rate law for Mn(II) oxidation by L. discophora as a function of pH, temperature, dissolved oxygen concentration (D.O.), and Cu concentration is proposed. At circumneutral pH, the rate of biologically mediated Mn(II) oxidation is likely to exceed homogeneous abiotic Mn(II) oxidation at relatively low (≈μg/L) concentrations of Mn oxidizing bacteria.     

In situ measurement of Re-Os isotopes in mantle sulfides by laser ablation multicollector-inductively coupled plasma mass spectrometry: analytical methods and preliminary results

A method has been developed for the in situ determination of Re-Os isotopes in single grains of sulfides in mantle-derived peridotites using a laser ablation microprobe attached to a multicollector-induced coupled plasma mass spectrometer (MC-ICPMS). High-precision Os isotope analysis by MC-ICPMS is demonstrated by the measurement of interlaboratory Os standards. Evaluation of mass bias correction procedures shows that the exponential law provides the best fit to the Os isotope data and that the ratio of the mass fractionation coefficients for Re and Os remains constant for the range of typical instrument operating conditions. This relationship enables the accurate and precise correction of the isobaric interference of ¹⁸⁷Re on ¹⁸⁷Os for ¹⁸⁷Re/¹⁸⁸Os values up to 1.6.Results are presented for single sulfide inclusions in olivine macrocryts from kimberlites in the Siberian and Slave Cratons, and sulfides enclosed in silicates and interstitial to silicates in peridotite xenoliths from the Slave Craton and Massif Central, France. Enclosed sulfides larger than 50 μm in diameter and with Os contents ≥40 ppm give ¹⁸⁷Os/¹⁸⁸Os ratios with a precision of 0.1% (2 SE), which is equivalent to N-TIMS whole-rock data. Interstitial sulfides typically have lower Os (10 to 30 ppm) and give analyses with lower precision (∼1 to 2%) but still provide valuable information on the movement of Os within the lithosphere. The sulfide inclusions in silicates preserve significantly less radiogenic Os isotopic compositions than interstitial sulfides and accordingly produce significantly older and more realistic Re-Os age information. Whole-rock Os isotope compositions reflect the proportions of different generations of enclosed and interstitial sulfides; this calls into question the significance of many published “depletion ages.”     

CO2 solubility and speciation in intermediate (andesitic) melts: the role of H2O and composition

We determined total CO₂ solubilities in andesite melts with a range of compositions. Melts were equilibrated with excess C-O(-H) fluid at 1 GPa and 1300°C then quenched to glasses. Samples were analyzed using an electron microprobe for major elements, ion microprobe for C-O-H volatiles, and Fourier transform infrared spectroscopy for molecular H₂O, OH⁻, molecular CO₂, and CO₃²⁻. CO₂ solubility was determined in hydrous andesite glasses and we found that H₂O content has a strong influence on C-O speciation and total CO₂ solubility. In anhydrous andesite melts with ∼60 wt.% SiO₂, total CO₂ solubility is ∼0.3 wt.% at 1300°C and 1 GPa and total CO₂ solubility increases by about 0.06 wt.% per wt.% of total H₂O. As total H₂O increases from ∼0 to ∼3.4 wt.%, molecular CO₂ decreases (from 0.07 ± 0.01 wt.% to ∼0.01 wt.%) and CO₃²⁻ increases (from 0.24 ± 0.04 wt.% to 0.57 ± 0.09 wt.%). Molecular CO₂ increases as the calculated mole fraction of CO₂ in the fluid increases, showing Henrian behavior. In contrast, CO₃²⁻ decreases as the calculated mole fraction of CO₂ in the fluid increases, indicating that CO₃²⁻ solubility is strongly dependent on the availability of reactive oxygens in the melt. These findings have implications for CO₂ degassing. If substantial H₂O is present, total CO₂ solubility is higher and CO₂ will degas at relatively shallow levels compared to a drier melt. Total CO₂ solubility was also examined in andesitic glasses with additional Ca, K, or Mg and low H₂O contents (<1 wt.%). We found that total CO₂ solubility is negatively correlated with (Si + Al) cation mole fraction and positively correlated with cations with large Gibbs free energy of decarbonation or high charge-to-radius ratios (e.g., Ca). Combining our andesite data with data from the literature, we find that molecular CO₂ is more abundant in highly polymerized melts with high ionic porosities (>∼48.3%), and low nonbridging oxygen/tetrahedral oxygen (<∼0.3). Carbonate dominates most silicate melts and is most abundant in depolymerized melts with low ionic porosities, high nonbridging oxygen/tetrahedral oxygen (>∼0.3), and abundant cations with large Gibbs free energy of decarbonation or high charge-to-radius ratio. In natural silicate melt, the oxygens in the carbonate are likely associated with tetrahedral and network-modifying cations (including Ca, H, or H-bonds) or a combinations of those cations.