Radial growth rates and Pb ages of hydrothermal massive sulfides from the Juan de Fuca Ridge

Activities of ²³⁸U, ²²⁸Ra, ²²⁶Ra and ²¹⁰Pb were determined in submarine hydrothermal massive sulfides by nondestructive, gamma-ray spectrometry. The samples were collected by the manned submersible DSRV “Alvin” from active hydrothermal fields on the Endeavour Segment and Axial Seamount of the Juan de Fuca Ridge. ²¹⁰Pb activities are mostly below the equilibrium level with ²²⁶Ra, which is linearly correlated with the concentration of Ba, Sr and Ca in the deposits. The ratios of²²⁶Ra to the alkaline earth elements indicate that hydrothermal alteration of the underlying oceanic crust is the dominant source of Ra in the sulfide deposits.The ²¹⁰Pb/Pb ratios measured in many of the sulfides are higher than the ratio obtained for a basalt source of ²¹⁰Pb, probably because of ²¹⁰Pb ingrowth from ²²⁶Ra within the sulfide deposits. An isochron approach employing ratios of ²¹⁰Pb/Pb and ²²⁶Ra/Pb yielded an initial ²¹⁰Pb/Pb ratio in the range of 0–0.57 dpm/μg Pb, implying that the crustal residence time of the hydrothermal fluid in the Endeavour Segment is very short ( < 10 years) and that basalt alteration is the only source of the ²¹⁰Pb and Pb. For the hydrothermal fluid in Axial Seamount, a residence time of 10–20 years is estimated on the basis of the initial ²¹⁰Pb/Pb and ²²⁸Ra/²²⁶Ra ratios of a sulfide chimney. Both residence time estimates are consistent with the results of previous studies. We have estimated the upper limits of sample ages ranging from tens to a hundred years for 12 samples, with the remaining seven samples indicating ages close to or older than 150 years, the practical limit of the ²¹⁰Pb/Pb dating technique.A concentrically sectioned sulfide chimney from Axial Seamount yielded mean radial growth rates ranging from a few tenths to a few mm/year based on gradients of ²¹⁰Pb/Pb and ²²⁸Ra/²²⁶Ra activity ratios, whereas a similarly sectioned chimney from the Endeavour Segment, although collected from the top of an active “black smoker” vent, displayed no ²¹⁰Pb or ²²⁸Ra activity. Our results have implications for the duration and periodicity of hydrothermal circulation and associated mineral deposition at mid-ocean ridges.     

The Application of Telemetry to Large-Scale Horizontal Anisotropic Permeability Determinations by Surface Tiltmeter Survey

An advanced two-way radio link (transceiver units) and data logging system have provided a powerful means of real-time series data collection and analysis. The application of this telemetry system to surface tiltmeter surveys provides significant cost savings for testing and analysis of deep, large-scale horizontal anisotropic permeability and heterogeneity determinations.
The determination of horizontal anisotropic properties requires one pumping well and eight to 10 tiltmeter monitoring stations. The validity of the depth of the test may reach 4,000 feet below land surface. With the addition of one partially penetrating observation well, the entire three-dimensional anisotropic permeability can be determined. With the addition of a fully penetrating well, the storage coefficient can be determined as well as leakage property (including vertical permeability of the confining layers). An example test case was analyzed for horizontal anisotropic permeability with remarkable success despite relatively unfavorable detection conditions.
A thorough understanding of the geology overlying the aquifer system must be made in order to assess the applicability of the surface tiltmeter survey to large-scale horizontal anisotropic permeability determinations.     

Computer simulations of the structural and physical properties of the olivine and spinel polymorphs of Mg2SiO4

The aim of the work presented is to develop a computer simulation technique which will predict the structure and physical properties of forsterite and ringwoodite, the major mantle-forming polymorphs of Mg₂SiO₄. The technique is based upon energy minimization, in which all structural parameters are varied until the configuration with the lowest energy is achieved. The lattice energy and physical properties (e.g. elasticity and dielectric constants) are calculated from interatomic potentials, which generally include electrostatic and short-range terms. We investigate several types of traditional potential models, and present a new type of model which includes partial ionic charges and a Morse potential to describe the effect of covalency on the Si-O bond. This new form of potential model is highly successful, and not only reproduces the zero-pressure structural, elastic and dielectric properties of forsterite and ringwoodite, but also accurately describes their pressure dependence.     

Oxygen budget of a perennially ice-covered Antarctic lake

A bulk O2 budget for Lake Hoare, Antarctica, is presented. Five years of seasonal data show the lake to be persistently supersaturated with O2. Oxygen is carried into the lake in glacial meltstreams and is left behind when this water is removed as ice by ablation and sublimation. A diffusive loss of O2 from the lake through the summer moat is suggested. Measured values of the total O2 in the water column indicate that the time scale of O2 turnover is much longer than a year. Based on these results we suggest that the amount of O2 in the water does not change significantly throughout the year and that the lake is also supersaturated with N2.     

High latitude river runoff in a doubled CO2 climate

A global atmospheric model is used to calculate the monthly river flow for nine of the world's major high latitude rivers for the present climate and for a doubled CO₂ climate. The model has a horizontal resolution of 4° × 5°, but the model's runoff from each grid box is quartered and added to the appropriate river drainage basin on a 2° × 2.5° resolution. A routing scheme is used to move runoff from a grid box to its neighboring downstream grid box and ultimately to the mouth of the river. In a model simulation in which atmospheric carbon dioxide is doubled, mean annual precipitation and river flow increase for all of these rivers, increased outflow at the river mouths begins earlier in the spring, and the maximum outflow occurs approximately one month sooner due to an earlier snow melt season. In the doubled CO₂ climate, snow mass decreases for the Yukon and Mackenzie rivers in North America and for rivers in northwestern Asia, but snow mass increases for rivers in northeastern Asia.     

Characteristics of hydrothermal plumes from two vent fields on the Juan de Fuca Ridge, northeast Pacific Ocean

Deep CTD/transmissometer tows and water bottle sampling were used during 1985 to map the regional distribution of the neutrally-buoyant plumes emanating from each of two major vent fields on the Southern Symmetrical Segment (SSS) and Endeavour Segment (ES) of the Juan de Fuca Ridge. At both vent fields, emissions from point and diffuse hydrothermal sources coalesced into a single 200-m-thick plume elongated in the direction of current flow and with characteristic temperature anomalies of 0.02–0.05°C and light-attenuation anomalies of 0.01–0.08 m⁻¹ (10–80 μg/l above background). Temperature anomalies in the core of each plume were uniform as far downcurrent as the plumes were mapped (10–15 km). Downcurrent light-attenuation trends were non-uniform and differed between plumes, apparently because different vent fluid chemistries at each field cause significant differences in the settling characteristics of the hydrothermal precipitates. Vent fluids from the SSS are metal-dominated and mostly precipitate very fine-grained hydrous Fe-oxides that remain suspended in the plume. Vent fluids from the ES are sulfur-dominated and precipitate a high proportion of coarser-grained Fe-sulfides that rapidly settle from the plume. The integrated flux of each vent field was estimated from measurements of the advective transport of each plume. Heat flux was 1700 ± 1100 MW from the ES and 580 ± 351 MW from the SSS. Particle flux varied from 546 ± 312 g/s to 204 ± 116 g/s at the ES depending on distance from the vent field, and was 92 ± 48 g/s from the SSS.     

The lattice dynamics and thermodynamics of the Mg2SiO4 polymorphs

We use an approach based upon the Born model of solids, in which potential functions represent the interactions between atoms in a structure, to calculate the phonon dispersion of forsterite and the lattice dynamical behaviour of the beta-phase and spinel polymorphs of Mg₂SiO₄. The potential used (THB1) was derived largely empirically using data from simple binary oxides, and has previously been successfully used to model the infrared and Raman behaviour of forsterite. It includes ‘bond bending’ terms, that model the directionality of the Si-O bond, in addition to the pair-wise additive Coulombic and short range terms. The phonon dispersion relationships of the Mg₂SiO₄ polymorphs predicted by THB1 were used to calculate the heat capacities, entropies, thermal expansion coefficients and Gruneisen parameters of these phases. The predicted heat capacities and entropies are in outstandingly good agreement with those determined experimentally. The predicted thermodynamic data of these phases were used to construct a phase diagram for this system, which has Clausius-Clapeyron slopes in very close agreement with those found by experiment, but which has predicted transformation pressures that show less close agreement with those inferred from experiment. The overall success, however, that we have in predicting the lattice dynamical and thermodynamic properties of the Mg₂SiO₄ polymorphs shows that our potential THB1 represents a significant step towards finding the elusive quantitative link between the microscopic or atomistic behaviour of minerals and their macroscopic properties.