An Overview of the 28 October 2012 M<Subscript>w</Subscript> 7.7 Earthquake in Haida Gwaii,Canada: A Tsunamigenic Thrust Event Along a Predominantly Strike-Slip Margin

The boundary between the Pacific and North America plates along Canada’s west coast is one of the most seismically active regions of Canada, and is where Canada’s two largest instrumentally recorded earthquakes have occurred. Although this is a predominantly strike-slip transform fault boundary, there is a component of oblique convergence between the Pacific and North America plates off Haida Gwaii. The 2012 M_w 7.7 Haida Gwaii earthquake was a thrust event that generated a tsunami with significant run up of over 7 m in several inlets on the west coast of Moresby Island (several over 6 m, with a maximum of 13 m). Damage from this earthquake and tsunami was minor due to the lack of population and vulnerable structures on this coast.     

Recovery of benthic macroinvertebrate and epilithic communities following a large flood,in an unstable,braided, New Zealand river

Benthic macroinvertebrates and small stones were collected from a riffle in the Ashley River, North Canterbury, New Zealand, on 12 occasions within a 132‐day period following a particularly large flood in 1986. Despite the occurrence of smaller floods during this period, benthic macroinvertebrate communities and stone surface organic layers recovered rapidly. Mean concentration of stone surface organic carbon increased from 0.23 g/m² to 1.01 g/m² stone surface in the first 23 days after the flood and chlorophyll a concentration increased from 0.13 mg/m² (day 3) to 9.2 mg/m² by day 132. Minor floods during the recovery period had little effect on organic layer biomass. Mean faunal density increased from 230/m² to 7920/m² during this time and taxon richness from 7 to 21 per 5 benthic samples. Immediately after the flood and throughout the study period the fauna was dominated by larvae of Deleatidium (Ephemeroptera: Leptophlebiidae), Hydora (Coleoptera: Elmidae), and Chironomidae. Re‐establishment of Deleatidium populations in previously denuded brands was effected by oviposition, egg‐hatching, and larval immigration. Minor braids are likely to represent important epicentres from which recolonisation proceeds.     

The role of moisture cycling in the weathering of a quartz chlorite schist in a tropical environment: findings of a laboratory simulation

Long‐term weathering of a quartz chlorite schist via wetting and drying was studied under a simulated tropical climate. Cubic rock samples (15 mm × 15 mm × 15 mm) were cut from larger rocks and subjected to time‐compressed climatic conditions simulating the tropical wet season climate at the Ranger Uranium Mine in the Northern Territory, Australia. Fragmentation, moisture content and moisture uptake rate were monitored over 5000 cycles of wetting and drying. To determine the impact of climatic variables, five climatic regimes were simulated, varying water application, temperature and drying. One of the climatic regimes reproduced observed temperature and moisture variability at the Ranger Uranium Mine, but over a compressed time scale. It is shown that wetting and drying is capable of weathering quartz chlorite schist with changes expected over a real time period of decades. While wetting and drying alone does produce changes to rock morphology, the incorporation of temperature variation further enhances weathering rates. Although little fragmentation occurred in experiments, significant changes to internal pore structure were observed, which could potentially enhance other weathering mechanisms. Moisture variability is shown to lead to higher weathering rates than are observed when samples are subjected only to leaching. Finally, experiments were conducted on two rock samples from the same source having only subtle differences in mineralogy. The samples exhibited quite different weathering rates leading to the conclusion that our knowledge of the role of rock type and composition in weathering is insufficient for the accurate determination of weathering rates. Copyright © 2005 John Wiley & Sons, Ltd.     

SciMeasure Wavefront Sensor Cameras and their Application in the Palomar Adaptive Optics System

SciMeasure, in collaboration with Emory University and the Jet Propulsion Laboratory, has developed a very versatile CCD controller for use in adaptive optics, optical interferometry, and other applications requiring high-speed readout rates and/or low read noise. The overall architecture of this controller system will be discussed and its performance using both EEV CCD39 and MIT/LL CCID-19 detectors will be presented. This controller is used in the adaptive optics system, developed by JPL, for the 200′′ Hale telescope at Palomar Mountain. Early diffraction-limited science results, recently achieved by the AO system, are presented. We gratefully acknowledge the financial support of NASA through SBIR contracts NAS8–97195 and NAS8–98081.     

The role of topography in controlling throughflow generation: A discussion

The distributions of specific catchment area and specific dispersal area values over the hillside studied by Anderson and Burt (1978) relate much more closely to the observed distributions of soil water matric potential than do the occurrences of contour concavity on which the authors rely. Highest potential always occurred in the zone of large specific catchment area except immediately after rainfall, when it occurred in the zone of small dispersal area. Isolines of low potential persistently conformed to those of specific dispersal area.     

A one‐dimensional model for simulating armouring and erosion on hillslopes: 2. Long term erosion and armouring predictions for two contrasting mine spoils

This paper investigates the dynamics of soil armouring as a result of fluvial erosion for a non‐cohesive sandy gravel spoil from the Ranger Mine, Australia, and a cohesive silt loam spoil from the Northparkes Mine, Australia, using a model for hillslope soil armouring. These long term predictions concentrate on the temporal and spatial changes of the spoil grading and erosion over 100–200 years for the flat cap regions (1–2%) and steep batter edges (10–30%) typically encountered on waste rock dumps. The existence of a significant rock fragment fraction in the Ranger spoil means that it armours readily, while Northparkes does not. For Ranger the waste rock showed reductions in (1) cumulative erosion of up to 81% from that obtained by extrapolating the initial erosion rate out 100 years and (2) the erosion/year by more than 10‐fold. For Northparkes reductions were less marked, with the maximum reduction in erosion/year being 37% after 200 years. For Ranger the reductions were greatest and fastest for intermediate gradient hillslopes. For the steepest hillslopes the armouring decreased because the flow shear stresses were large enough to mobilize all material in the armour layer. Model uncertainty was assessed with probabilistic confidence limits demonstrating that these erodibility reductions were statistically significant. A commonly used hillslope erosion model (sediment flux = β₁ discharge m₁ slope n₁) was fitted to these predictions. The erodibility, β₁, and m₁ decreased with time, which was consistent with our physical intuition about armouring. At Ranger the parameter m₁ asymptoted to 1·5–1·6 while at Northparkes it asymptoted to 1·2–1·3. At Ranger transient spatial trends in armouring led to a short term (50–200 years in the future) reduction in n₁, to below zero under certain circumstances, recovering to an asymptote of about 0·5–1. At Northparkes n₁ asymptoted to about 0·6, with no negative transients predicted. The m₁ and n₁ parameters predicted for Ranger were shown to be consistent with field data from a 10‐year‐old armoured hillslope and consistent with published relationships between erodibility and rock content for natural hillslopes. Copyright © 2007 John Wiley & Sons, Ltd.     

Ferruginous thermal spring complexes, northwest Tasmania: evidence that far-field stresses acting on a fracture mesh can open and maintain vertical flow in carbonate terrains

Far-field stress changes in the southern Australian plate since 5 Ma have produced significant areas of uplift and seismicity. In northwest Tasmania, there is evidence that this stress reorientation to maximum horizontal NW?CSE stress has influenced meteoric-derived thermal (15?C20°C) discharge patterns of confined karstic aquifers, by placing pre-existing NW-trending faults/fractures into a dilated state or a critically stressed state. Previous studies have shown that spring discharge has operated continuously for at least 65,000 years, and has transported large volumes of solutes to the surface to be deposited as mounds of calcite-goethite-silica up to 7 m high. The thermal spring chemistry at one site, Mella, is consistent with descent to at least 1.2?C1.5 km, although the hinterland within 50 km is less than 500 m elevation. Thermal spring chemistry is consistent with most of the deep water?Crock interaction occurring in low-strontium Smithton Dolomite. While some of this water is discharged at springs, some instead intersects shallow zones of NE-fracture-controlled rock (2?×?4 km in area) with karstic permeability where, although confined and subject to a NE-directed hydraulic gradient, it circulates and cools to ambient temperature, with only minor mixing with other groundwaters.     

A study of the 2.5–25 μm spectrum of H2O ice

We present new absorbance spectra of the 3-, 6- and 12-μm features of amorphous and crystalline H₂O ice obtained between 10 and 140 K. Three sets of measurements have been made. In series I, the ice film was initially deposited on to a CsI substrate at 10 K and successive spectra were then obtained at intermediate temperatures as the ice was warmed up to 140 K. The second set, series II, comprises spectra for ice films deposited and measured at temperatures between 10 and 140 K. In the third set of measurements, series III, spectra were obtained for an ice film deposited at 140 K and then at intermediate temperatures as the film was cooled down to 10 K. The series I and II results show that the ice undergoes an amorphous-to-crystalline phase transition in the 110–120 K range. The 3- and 12-μm bands have similar trends in full width at half-maximum (FWHM) and opposite peak wavelength shifts. The temperature behaviour of the 6-μm band is different, as no clear phase transition temperature can be discerned from its FWHM and peak wavelength position data. In the series III spectra the peak wavelength positions and FWHM of the three bands remain relatively constant, thus demonstrating the stability of the crystalline phase against thermal cycling. A comparison between the laboratory results and astronomical spectra suggests that the identification of the librational band of H₂O ice in OH 231.8 + 4.2 may be incorrect.     

Geomorphological evolution and sediment stratigraphy of numerically simulated alluvial fans

When a sediment laden river reaches a flat basin area the coarse fraction of their sediment load is deposited in a cone shaped structure called an alluvial fan. In this article we used the State Space Soil Production and Assessment Model (SSSPAM) coupled landform–soilscape evolution model to simulate the development of alluvial fans in two- and three-dimensional landforms. In SSSPAM the physical processes of erosion and armouring, soil weathering and sediment deposition were modelled using state-space matrices, in both two and three dimensions. The results of the two-dimensional fan showed that the fan grew vertically and laterally keeping a concave up long profile. It also showed a downstream fining of the sediments along the fan profile. Both of these observations are in agreement with available literature concerning natural and experimental fan formations. Simulations with the three-dimensional landform produced a fan with a semicircular shape with concave up long profiles and concave down cross profiles which is typical for fans found in nature and ones developed in laboratory conditions. During the simulation the main channel which brings sediment to the fan structure changed its position constantly leading to the semicircular shape of the fan. This behaviour is similar to the autogenic process of ‘fanhead trenching’ which is the major mechanism of sediment redistribution while the fan is developing. The three-dimensional fan simulation also exhibited the downstream fining of sediments from the fan apex to the peripheries. Further, the simulated fan also developed complex internal sediment stratification which is modelled by SSSPAM. Currently such complex sediment stratification is thought to be a result of allogenic processes. However, this simulation shows that, such complex internal sediment structures can develop through autogenic processes as well. © 2020 John Wiley & Sons, Ltd.