Late Paleozoic Fluid Systems and Their Ore-forming Effects in the Yuebei Basin, Northern Guangdong, China

Based on detailed and systematic researches of the geology of ore deposits, fluid inclusions and isotope geochemistry etc., and regarding the Late Paleozoic fluid system of the Yuebei Basin as an integrated object in this paper, we have revealed the temporo-spatial evolution law of the basin＇s fluid system and discussed its ore-forming effects by simulating and analyzing the distribution of ore-forming elements, the fluid thermodynamics and dynamics of evolution processes of this basin. The results show that Late Paleozoic ore-forming fluid systems of the Yuebei Basin include four basic types as follows. （1） The sea floor volcanic-exhalation system developed during the rapid basin slip-extension stage in the Mid-Late Devonian, which affected the Dabaoshan region. It thus formed the Dabaoshan-type Cu-Pb-Zn-Fe sea floor volcanic-exhalation sedimentary deposits. （2） The compaction fluid system developed during the stable spreading and thermal subsidence-compression stage of the basin in the Mid-Late Devonian. The range of its effects extended all over the whole basin. It resulted in filling-metasomatic deposits, such as the Hongyan-type pyrite deposits and pyrite sheet within the Fankou-type Cu-Pb-Zn-S deposits. （3） The hot water circulation system of sea floor developed during the stage of basin uplifting and micro-aulacogen from the late Late Carboniferous to Middle Carboniferous. The range of its effects covered the Fankou region. It thus formed MVT deposits, such as the main orebody of the Fankou-type Pb-Zn-S deposits. （4） The gravity fluid system developed during the stage of fold uplifting and the basin closed from Middle Triassic to Jurassic, forming groundwater hydrothermal deposits, e.g. the veinlet Pb-Zn-calcite orebodies of the Fankou-type Pb-Zn- S deposits. Migration and concentration of the ore-forming fluids were constrained by the state of temporo-spatial distribution of its fluid potential. Growth faults not only converged the fluids and drove them to move upwards, but also the fluids often crossed the faults to the edges of the basin at the bottom of these faults and the lithologic interfaces, and even migrated to the basin＇s edges from top to bottom along the faults, which may be one of the basic reasons for the stratabound deposits to cluster mainly along the contemporaneous faults on the inner border of the basin. The superposed mineralization resulting from the multi-stage activity of contemporaneous faults and ore-forming fluid systems in the basin may be one of the key factors for forming superlarge ore deposits.     

容量法测定水样中硫酸根

本文对EDTA滴定过量Pb间接测定SO_4~(2-)的方法作了改进。加入乙醇抑制PbSO_4沉淀的溶解,使滴定不需分离沉淀而直接进行。用六次甲基四胺调节控制pH为5.2—5.4,可避免大量共存Ca~(2+)、Mg~(2+)的干扰。改进后的方法简单、快速,准确度和精密度均好,可适用SO_4~(2-)含量高于1mg/L的天然水分析。     

Implementation of perfectly matched layers in an arbitrary geometrical boundary for elastic wave modelling

The perfectly matched layer (PML) absorbing boundary condition is incorporated into an irregular-grid elastic-wave modelling scheme, thus resulting in an irregular-grid PML method. We develop the irregular-grid PML method using the local coordinate system based PML splitting equations and integral formulation of the PML equations. The irregular-grid PML method is implemented under a discretization of triangular grid cells, which has the ability to absorb incident waves in arbitrary directions. This allows the PML absorbing layer to be imposed along arbitrary geometrical boundaries. As a result, the computational domain can be constructed with smaller nodes, for instance, to represent the 2-D half-space by a semi-circle rather than a rectangle. By using a smooth artificial boundary, the irregular-grid PML method can also avoid the special treatments to the corners, which lead to complex computer implementations in the conventional PML method. We implement the irregular-grid PML method in both 2-D elastic isotropic and anisotropic media. The numerical simulations of a VTI lamb's problem, wave propagation in an isotropic elastic medium with curved surface and in a TTI medium demonstrate the good behaviour of the irregular-grid PML method.     

唐朝末年以来广西柳州干湿变化及人类活动演变

中世纪暖期和小冰期是近2 000年气候变化中重要的气候事件,厘清其在低纬度地区干湿变化特征及其对古代农业发展及人口增长的影响,具有重要的意义。通过对广西柳州岩溶洞穴中一60 cm岩芯进行孢粉、炭屑分析发现,研究区的气候、稻作农业从唐末以来先后经历了6个阶段演化：1）875―940 a A.D.,C/P值及花粉记录指示：研究区气候整体偏干,水稻种植减少;2）940―1 050 a A.D.,C/P值及花粉记录指示：夏季风增强,水稻种植稍增长,人口增加;3）1 050―1 140 a A.D.,C/P值及花粉记录指示：夏季风减弱,稻作农业及人口较前期有所增长;4）1 140―1370 a A.D.,C/P值及莎草科花粉含量指示：研究区当时气候处于“中世纪暖期”温暖湿润期,稻作农业面积扩大,人口增加;5）1 370―1 900 a A.D.,C/P值及莎草科花粉含量指示：“小冰期”气候变干,水稻种植及人口逐渐减少;6）1 900―2 009 a A.D.气候变暖湿,水稻种植扩大,人口迅速增长。进一步对研究区气候事件与稻作农业及人口关系研究发现：历史时期气候事件与水稻种植、人口具有耦合关系,即中世纪暖期,气候暖湿,水稻种植扩大,人口增殖;小冰期,气候冷干,水稻种植萎缩,人口锐减。在非原地沉积时,莎草科和C/P 对水分反映敏感,可以用来指示气候干湿变化。     

Normalization of Hydrodynamic Coefficients in Morison Equation

-The hydrodynamic coefficients C_d and C_m are not only dependent on the size of slender cylin-der,its location in water,KC number and Re number,but also vary with environmental conditions,i.e.,in regular waves or in irregular waves,in pure waves or in wave-current coexisting field.In this paper,thenormalization of hydrodynamic coefficients for various environmental conditions is discussed.When aproper definition of KC number and proper characteristic values of irregular waves are used,a unified re-lationship between C_d,C_m and KC number for regular waves,irregular waves,pure waves and wave-cur-rent coexisting field can be obtained.     

Estimation of Turbulent Fluxes Using the Flux-Variance Method over an Alpine Meadow Surface in the Eastern Tibetan Plateau

The flux-variance similarity relation and the vertical transfer of scalars exhibit dissimilarity over different types of surfaces,resulting in different parameterization approaches of relative transport efficiency among scalars to estimate turbulent fluxes using the flux-variance method.We investigated these issues using eddycovariance measurements over an open,homogeneous and flat grassland in the eastern Tibetan Plateau in summer under intermediate hydrological conditions during rainy season.In unstable conditions,the temperature,water vapor,and CO2 followed the flux-variance similarity relation,but did not show in precisely the same way due to different roles(active or passive) of these scalars.Similarity constants of temperature,water vapor and CO2 were found to be 1.12,1.19 and 1.17,respectively.Heat transportation was more efficient than water vapor and CO2.Based on the estimated sensible heat flux,five parameterization methods of relative transport efficiency of heat to water vapor and CO2 were examined to estimate latent heat and CO2 fluxes.The strategy of local determination of flux-variance similarity relation is recommended for the estimation of latent heat and CO2 fluxes.This approach is better for representing the averaged relative transport efficiency,and technically easier to apply,compared to other more complex ones.     

Diurnal SST warming in the Bay of Biscay: satellite measurements and model prediction

INTRODUCTIONIt has long been recognized that a diurnal thermal cycle occurs in the upper layer of the ocean(Stommel et al., 1969; Price and Weller, 1986). Interest in the subject has revived in recentyears due to the importance of resolving the diurnal cycle for correctly coupling the ocean and atmosphere (Lukas, 1991 ). While the study of the diurnal cycle is of intrinsic scientific interest, italso offers the benefit to remote sensing scientists of identifying the bias caused by the di…     

Laboratory study on cement admixed marine silt bricks

For the purpose of efficient utilization of sediments dredged from harbor, a new method was proposed in this study. Marine silt bricks were made by mixing sediments with cement and gypsum, placing it in a cubic mold with 240 mm in length, 115 mm in width, and 53 mm in height, and curing for certain days. To investigate the effects of cement and initial water content of soil on the mechanical behavior of marine silt bricks, unconfined compressive and flexural strength tests were carried out. Given the same curing time and cement content, the higher the initial water content, the lower the compressive and flexural strength. After 60 days of curing, the compressive strength of marine silt bricks with cement content = 20% and water content = LL (liquid limit) reached approximately 5 MPa. The flexural strength was relatively low. The flexural strength of marine silt bricks with 20% cement and water content = LL was around 1.5 MPa. The compressive and flexural strength decreased with the increase of water/cement ratio. As for the curing time, longer curing time had a positive impact on the compressive strength. The ratio of flexural to compressive strength varied slightly in the range of 0.4–0.5.     

低扩散系数对Pd77 Cu6 Si17合金易非晶化的影响

采用激光熔凝技术,研究了Pd₇₇Cu₆Si₁₇合金快速凝固组织的演变规律.研究表明:随着生长速度的增大,Pd₇₇Cu₆Si₁₇合金晶体生长组织形貌发生了Pd₃Si枝晶+共晶-ξ枝晶+共晶-共晶团簇-规则共晶-非晶的转变;共晶失稳即非晶形成的临界生长速度为6 mm/s,最小层片间距为35 nm.通过与Al-25 wt%Sm,Al-32.7 w