Clinoform architecture and along‐strike facies variability through an exhumed erosional to accretionary basin margin transition

Exhumed basin margin‐scale clinothems provide important archives for understanding process interactions and reconstructing the physiography of sedimentary basins. However, studies of coeval shelf through slope to basin‐floor deposits are rarely documented, mainly due to outcrop or subsurface dataset limitations. Unit G from the Laingsburg depocentre (Karoo Basin, South Africa) is a rare example of a complete basin margin scale clinothem (>60 km long, 200 m‐high), with >10 km of depositional strike control, which allows a quasi‐3D study of a preserved shelf‐slope‐basin floor transition over a ca. 1,200 km² area. Sand‐prone, wave‐influenced topset deposits close to the shelf‐edge rollover zone can be physically mapped down dip for ca. 10 km as they thicken and transition into heterolithic foreset/slope deposits. These deposits progressively fine and thin over tens of km farther down dip into sand‐starved bottomset/basin‐floor deposits. Only a few km along strike, the coeval foreset/slope deposits are bypass‐dominated with incisional features interpreted as minor slope conduits/gullies. The margin here is steeper, more channelized and records a stepped profile with evidence of sand‐filled intraslope topography, a preserved base‐of‐slope transition zone and sand‐rich bottomset/basin‐floor deposits. Unit G is interpreted as part of a composite depositional sequence that records a change in basin margin style from an underlying incised slope with large sand‐rich basin‐floor fans to an overlying accretion‐dominated shelf with limited sand supply to the slope and basin floor. The change in margin style is accompanied with decreased clinoform height/slope and increased shelf width. This is interpreted to reflect a transition in subsidence style from regional sag, driven by dynamic topography/inherited basement configuration, to early foreland basin flexural loading. Results of this study caution against reconstructing basin margin successions from partial datasets without accounting for temporal and spatial physiographic changes, with potential implications on predictive basin evolution models.     

Long‐term temporal and spatial patterns in bioeroding sponge distribution at the Abrolhos Bank,Brazil, Southwestern Atlantic

Bioeroding sponges belong to the most dominant bioeroders, significantly contributing to the erosion of coral reefs. Some species are tolerant or even benefit from environmental conditions such as ocean warming, acidification, and eutrophication. In consequence, increases in sponge bioerosion have been observed on some coral reefs over the last decades. The Abrolhos Bank is the largest coral reef system in the South Atlantic. It has been affected by sedimentation, eutrophication, overfishing, and climate change, mainly affecting coastal reefs, and at lesser intensity outer ones as well. This study aimed to describe spatial and temporal patterns in bioeroding sponge distribution in carbonate substrates in the Abrolhos Bank. Photo‐quadrats were used to compare bioeroding sponge abundance between two shallow reefs: a coastal, Pedra de Leste (PL), and an outer reef, Parcel dos Abrolhos (PAB). Each individual was delimitated over the substrate by determining the sponge surface through a line connecting the outermost papillae. The study was conducted over 6 years in 2008–2009 and 2013–2016. Four species of bioeroding sponges were identified: Cliona carteri Ridley, 1881, C. delitrix Pang, 1973, C. cf. schmidtii Ridley, 1881, and Siphonodictyon coralliphagum Rützler, 1971. The distribution and abundance of species varied between the inner and outer reefs and across the years, and displayed certain selectivity for the calcareous substrates recorded. Crustose coralline algae (CCA) were the main substrate excavated by the most abundant bioeroding species, C. carteri, and represented 70% of the substrate types occupied by this sponge (CCA, coral overgrown by CCA and plain coral). The highest abundance of bioeroding sponges observed in photo‐quadrats was 21.3 individuals/m² at the outer reefs (PAB) in 2014. The abundances or areal extents of bioeroding sponges were up to 10 times greater on the outer reefs than on the coastal ones, where sedimentation is higher and more strongly influenced by siliciclastic material. Moreover, a higher herbivorous fish biomass has been reported on outer reefs which could also influence the higher abundance of bioeroding sponges in outer reefs. During the study period of 6 years, an increase in bioeroding sponge abundance was observed at the outer reefs (PAB), with the sea surface temperature increase. As CCA have an important role in reefal cementation and carbonate production in the Abrolhos reefs, a bioerosion impact might be expected, in particular, on the outer reefs.     

The Cabo Frio upwelling overrides geographical patterns in the population dynamics of the shrimp Artemesia longinaris Spence Bate, 1888 (Decapoda: Penaeidae)

Upwelling areas are among the most productive ecosystems on the planet, influencing the biology of marine organisms. This study investigated the population dynamics of the shrimp Artemesia longinaris in two regions in southeastern Brazil, one inside (Macaé—Rio de Janeiro State) and one outside (Ubatuba—State of São Paulo) the Cabo Frio upwelling area. The aim was to verify the influence of the upwelling phenomenon on the abundance, growth, longevity, size of sexual maturity, and reproductive period of the species. In total, 188,902 individuals were captured at Macaé and 3,461 at Ubatuba. Individuals captured at Macaé showed larger maximum size, higher longevity, and slower growth rate, besides reaching sexual maturity at larger sizes than at Ubatuba. Continuous reproduction was observed in both regions, with juvenile recruitment peaks in spring and summer. Local conditions observed at Macaé were influenced by the Cabo Frio upwelling zone, characterized by productive and cooler waters that are around 20°C during most of the year. The upwelling phenomenon is probably the main factor influencing the population parameters studied here, changing the geographic patterns previously observed for the variation of these parameters in A. longinaris.     

Northwest Africa 11024—A heated and dehydrated unique carbonaceous (CM) chondrite

Based on the high abundance of fine‐grained material and its dark appearance, NWA 11024 was recognized as a CM chondrite, which is also confirmed by oxygen isotope measurements. But contrary to known CM chondrites, the typical phases indicating aqueous alteration (e.g., phyllosilicates, carbonates) are missing. Using multiple analytical techniques, this study reveals the differences and similarities to known CM chondrites and will discuss the possibility that NWA 11024 is the first type 3 CM chondrite. During the investigation, two texturally apparent tochilinite–cronstedtite intergrowths were identified within two thin sections. However, the former phyllosilicates were recrystallized to Fe‐rich olivine during a heating event without changing the textural appearance. A peak temperature of 400–600 °C is estimated, which is not high enough to destroy or recrystallize calcite grains. Thus, calcites were never constituents of the mineral paragenesis. Another remarkable feature of NWA 11024 is the occurrence of unknown clot‐like inclusions (UCLIs) within fine‐grained rims, which are unique in this clarity. Their density and S concentration are significantly higher than of the surrounding fine‐grained rim and UCLIs can be seen as primary objects that were not formed by secondary alteration processes inside the rims. Similarities to chondritic and cometary interplanetary dust particles suggest an ice‐rich first‐generation planetesimal for their origin. In the earliest evolution, NWA 11024 experienced the lowest degree of aqueous alteration of all known CM chondrites and subsequently, a heating event dehydrated the sample. We suggest to classify the meteorite NWA 11024 as the first type 3 CM chondrite similar to the classification of CV3 chondrites (like Allende) that could also have lost their matrix phyllosilicates by thermal dehydration.     

Improved Priority‐Flood method for depression filling by redundant calculation optimization in local micro‐relief areas

Depression filling is a critical step in distributed hydrological modeling using digital elevation models (DEMs). The traditional Priority‐Flood (PF) approach is widely used due to its relatively high efficiency when dealing with a small‐sized DEM. However, it seems inadequate and inefficient when dealing with large high‐resolution DEMs. In this work, we examined the relationship between the PF algorithm calculation process and the topographical characteristics of depressions, and found significant redundant calculations in the local micro‐relief areas in the conventional PF algorithm. As such calculations require more time when dealing with large DEMs, we thus propose a new variant of the PF algorithm, wherein redundant points and calculations are recognized and eliminated based on the local micro‐relief water‐flow characteristics of the depression‐filling process. In addition, depressions and flatlands were optimally processed by a quick queue to improve the efficiency of the process. The proposed method was applied and validated in eight case areas using the Shuttle Radar Topography Mission digital elevation model (SRTM‐DEM) with 1 arc‐second resolution. These selected areas have different data sizes. A comparative analysis among the proposed method, the Wang and Liu‐based PF, the improved Barnes‐based PF, the improved Zhou‐based PF, and the Planchon and Darboux (P&D) algorithms was conducted to evaluate the accuracy and efficiency of the proposed algorithm. The results showed that the proposed algorithm is 43.2% (maximum) faster than Wang and Liu's variant of the PF method, with an average of 31.8%. In addition, the proposed algorithm achieved similar performance to the improved Zhou‐based PF algorithm, though our algorithm has the advantage of being simpler. The optimal strategies using the proposed algorithm can be employed in various landforms with high efficiency. The proposed method can also achieve good depression filling, even with large amounts of DEM data.     

Robust abnormality detection methods for spatial search of radioactive materials

Radiological dirty bombs and improvised nuclear devices pose a significant threat to both public health and national security. Growing networks of radiation sensors have been deployed by a number of offices within the U.S. and international agencies. Detecting such threats while minimizing false alarm rates presents a considerable challenge to homeland security and public health. This research aims to achieve a higher probability of detection with a lower probability of false alarms. It focuses on the local spatial instability of radiation levels in order to detect radioactive materials based on robust outlier detection methods. Our approach includes a three‐step abnormality detection method consisting of one‐dimensional robust outlier detection for all gamma‐ray counts, a density‐based clustering analysis, and a two‐dimensional robust outlier detection method using a bagplot, based on spatial associations. The effectiveness of the method proposed is demonstrated through a case study, wherein radioactive materials are detected in urban environments, and its performance is compared with alternative methods employing a k‐sigma approach, local Getis–Ord () statistic, and the goodness of fit of the Poisson distribution.     

New observations on high‐pressure phases in a shock melt vein in the Villalbeto de la Peña meteorite: Insights into the shock behavior of diopside

The petrology and mineralogy of shock melt veins in the L6 ordinary chondrite host of Villalbeto de la Peña, a highly shocked, L chondrite polymict breccia, have been investigated in detail using scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and electron probe microanalysis. Entrained olivine, enstatite, diopside, and plagioclase are transformed into ringwoodite, low‐Ca majorite, high‐Ca majorite, and an assemblage of jadeite‐lingunite, respectively, in several shock melt veins and pockets. We have focused on the shock behavior of diopside in a particularly large shock melt vein (10 mm long and up to 4 mm wide) in order to provide additional insights into its high‐pressure polymorphic phase transformation mechanisms. We report the first evidence of diopside undergoing shock‐induced melting, and the occurrence of natural Ca‐majorite formed by solid‐state transformation from diopside. Magnesiowüstite has also been found as veins injected into diopside in the form of nanocrystalline grains that crystallized from a melt and also occurs interstitially between majorite‐pyrope grains in the melt‐vein matrix. In addition, we have observed compositional zoning in majorite‐pyrope grains in the matrix of the shock‐melt vein, which has not been described previously in any shocked meteorite. Collectively, all these different lines of evidence are suggestive of a major shock event with high cooling rates. The minimum peak shock conditions are difficult to constrain, because of the uncertainties in applying experimentally determined high‐pressure phase equilibria to complex natural systems. However, our results suggest that conditions between 16 and 28 GPa and 2000–2200 °C were reached.     

(U‐Th)/He zircon dating of Chesapeake Bay distal impact ejecta from ODP site 1073

Single crystal (U‐Th)/He dating has been undertaken on 21 detrital zircon grains extracted from a core sample from Ocean Drilling Project (ODP) site 1073, which is located ~390 km northeast of the center of the Chesapeake Bay impact structure. Optical and electron imaging in combination with energy dispersive X‐ray microanalysis (EDS) of zircon grains from this late Eocene sediment shows clear evidence of shock metamorphism in some zircon grains, which suggests that these shocked zircon crystals are distal ejecta from the formation of the ~40 km diameter Chesapeake Bay impact structure. (U‐Th/He) dates for zircon crystals from this sediment range from 33.49 ± 0.94 to 305.1 ± 8.6 Ma (2σ), implying crystal‐to‐crystal variability in the degree of impact‐related resetting of (U‐Th)/He systematics and a range of different possible sources. The two youngest zircon grains yield an inverse‐variance weighted mean (U‐Th)/He age of 33.99 ± 0.71 Ma (2σ uncertainties n = 2; mean square weighted deviation = 2.6; probability [P] = 11%), which is interpreted to be the (U‐Th)/He age of formation of the Chesapeake Bay impact structure. This age is in agreement with K/Ar, ⁴⁰Ar/³⁹Ar, and fission track dates for tektites from the North American strewn field, which have been interpreted as associated with the Chesapeake Bay impact event.